Hello,
I finished an Asterisk installation this weekend, and I'm experiencing
a problem when a user hangs up on a line after leaving a voicemail
message.
I found two similar issues when reading through the archives, and have
not been able to resolve my issue from their answers.
http://lists.digium.com/pipermail/asterisk-users/2004-April/042453.html
http://www.marko.net/asterisk/archives/0212/0000.html
At first, the voicemail messages would contain 7 minutes of
busy signal at the end of the message, and now it contains about
40 seconds after adding busydetect=yes to zapata.conf and
installing the latest CVS.
Any ideas would be greatly appreciated.
Niles Ingalls
I'm using a Wildcard T100P, and have 11 incoming lines.
zapte.conf
span=1,0,0,esf,b8zs
loadzone=us
defaultzone=us
fxsls=1-11
zapata.conf
; Zapata telephony interface
; Configuration file
[channels]
musiconhold=default
language=en
context=default
switchtype=dms100
signalling=fxs_ls
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
busydetect=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
channel => 1
channel =>3-11
group=2
callgroup=2
pickupgroup=2
context=fxo1
channel => 2
