search for: westel

...21 13:59:18 crabbofix asterisk[2689]: NOTICE[6220]: chan_mgcp.c:3564 in mgcp_request: Asked to get a channel of unsupported format '0' Jul 21 13:59:18 crabbofix asterisk[2689]: NOTICE[6220]: channel.c:2901 in __ast_request_and_dial_uniqueid: Unable to request channel MGCP/aal n/30 at adit.westel.nt and Jul 21 16:11:01 crabbofix asterisk[2689]: NOTICE[6263]: rtp.c:788 in process_rfc3389: Comfort noise support incomplete in Asterisk (RFC 3389). Please turn off on client if possible. Client IP: 192.168.30.10 mgcp.conf (relevant parts) [general] port = 2427 ;port = 2727 bindaddr = 192.1...

What server hardware would you recommend for an Asterisk system which are really critical? The additional hardware will probably be two digium TE110P cards, and an Adit 600 platform. If it's possible to run on -48VDC, It would be great! Are there any experiences with any HP or FujitsuSiemens systems? Or other "complete server" systems? Thanks! BR Daniel Nystr?m

...the HAVEROUTE column of /etc/shorewall/proxyarp above. auto eth1 iface eth1 inet static address 206.124.146.176 netmask 255.255.255.255 broadcast 0.0.0.0 up ip route add 206.124.146.177 dev eth1 # Internet interface -- After the interface is up, add a route to the Westell 2200 DSL "Modem" auto eth2 iface eth2 inet static address 206.124.146.176 netmask 255.255.255.0 gateway 206.124.146.254 up ip route add 192.168.1.1 dev eth2 I could use "up ip route add 206.124.146.0/24 dev eth1" on the DMZ? And can the gateway...

Is it possible to use Wine to run USB DSL modems with Win9x only drivers? I had a choice of a free PCI or USB modem and heard I had a better shot with the USB. There are no Linux drivers, at least for now. Tom

...a standard normal setup. Now what I want to do is to simultaneously assign that SAME PUBLIC IP address onto one of the LAN computers so that it for all intents and purposes is a DMZ host. Before anyone says that this is mad and that it can''t be done, it can be done perfectly well and all WESTELL ADSL / Ethernet routers have this functionality along with some no name Far Eastern origin broadband routers based on a Conexant OEM reference design. Having thought long and hard about how to do this but not knowing NetFilter at all, I realised that the way this must be done is for the router t...

...a standard normal setup. Now what I want to do is to simultaneously assign that SAME PUBLIC IP address onto one of the LAN computers so that it for all intents and purposes is a DMZ host. Before anyone says that this is mad and that it can''t be done, it can be done perfectly well and all WESTELL ADSL / Ethernet routers have this functionality along with some no name Far Eastern origin broadband routers based on a Conexant OEM reference design. Having thought long and hard about how to do this but not knowing NetFilter at all, I realised that the way this must be done is for the router t...

I'm having some trouble with Polycom Soundpoint phones. I have had good luck deploying them on a local network, but now I've tried putting some in place which access their * server across the network. The * server is on a public IP and the polycoms are behind a NAT on a cable modem broadband connection. Every so often I get: May 27 16:12:08 NOTICE[29728]: Peer 'Polycom1' is now

...any phones, and share one phonenumber (eg. 555-12340). 1 Line will be dedicated to a specific unique phonenumber (Fax) (eg. 555-54321). The rest of the lines/channels (26) will be used by (by, not for) our customers, and will be redirected via our system to mobile devices (for more info: http://www.westel.se, and choose English in up-left corner). The large "group" will use a range of 1000 phonenumbers, which in turn will specify which mobile device it will redirect to (eg. 555-40000 to 555-40999). All lines/channels need to be connected to analog phones! And with the "large group&qu...

Are there much performance differences when using XEON or not? In my case, I will go with muLaw both in and out of Asterisk. Are there really any processing at all if it's using same codec all the way?

We have 3 existing switches interconnected via dpnss, we need to integrate asterisk with these switches via a dpnss link. Any suggestions? also does anyone have a link to the differences between isdn30 and dpnss. Thanks in advance Bails

...and changes the resistance on the loop) 2 Shorts or grounds, When the line 'rings' it sends voltage down the line if there is a short, or a ground open somewhere it changes the properties on the line causing havoc with the line. After reading this post, I feel that the problem is, a. Bad Westell, b. Bad loop. Bell will run a loop test from the DSLAM 'out' to your site. While they are doing this, call from another phone to make sure the test fails, or shows what the problem is. > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-u...

OK, here it is. Near perfect bandwidth calculation for ADSL users. Patch iproute2 with the HTB stuff and then this: It''s still a hack (as far as I can tell) because we are patching the rates tables, and hence I think it is only loosly coupled with the actual calculation of bytes in each bucket. However, it works very nicely for me! I have only been lightly testing with

I'm trying to use ZapRAS to enable ppp connection through my E1. After the ZapRAS command is executed, all sound is crappy on all lines! The only solution is to reboot the machine (or halt it, and then power it on since Digium's hardware doesn't like reboots). Anyone know how this can happen?! I'm using * 1.0.6 on Dell PowerEdge 1850 which are told (too late though) not to work

Hi. I wrote in a reply to a mail on here recently that you can''t set mpu (minimum packet unit) on HTB as you can on CBQ. I''ve just noticed that there is a patch on devik''s site which does mpu and overhead. http://luxik.cdi.cz/~devik/qos/htb/ For dsl users mpu is, for practical purposes going to be 106 - overhead is still variable though, depending on packet size.

...rt.org, xmcd@bazooka.amb.org, firewalls@greatcircle.com cc: root@camco.celestial.com, root@ultra.sonic.net, root@smurfy.tcimet.net, root@wildride.schoneal.com, root@crescent.Dartmouth.EDU, root@sunsite.unc.edu, root@redwood.shu.ac.uk, root@mylly.ton.tut.fi, root@MX.westel.hu, root@cddb.sai.msu.su, root@nematic.ieo.nctu.edu.tw Subject: Major Security Vulnerabilities in Remote CD Databases Message-ID: <Pine.LNX.3.95.961126203741.1613A-100000@phoenix.iss.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Status: RO XMCD is a popular unix audio c...

I will be using one E1 to the telco, and there will be 4 static phone numbers, and one number serie with 1000 numbers ranging from e.g. 555-1000 to 555-1999. There will be 30 FSX lines on the other side of Asterisk. Is it possible to "group" those 30 FSX lines pending on which number was dialed? Let's say line 1-4 are for the static numbers, and 5-30 for the other 1000 numbers. Are

Since i need to run at least 30 FXS-channels, what hardware should I use? Both Motherboard etc and FXS-hardware? There seems to be only 4-channel cards from digium. Then I would need at least 8 cards. 8 FXS-cards + 1 E1-card. What motherboard handles this? And to they all need unique IRQ's? BR Daniel Nystr?m

According to CarrierAccess, the Adit 600 uses CAS for voice signalling. What is this? This should not be a problem for Asterisk? Does the Asterisk server need to reencode CAS into aLaw when going to Euro ISDN? BR Daniel Nystr?m

Do anyone knows abount European resellers of these products: * Digium Wildcard TE410P * CarrierAccess Adit 600 Preferably in Sweden, but Europe is also better. Have anyone within EU ordered products from these companies directly from the US? In that case, how is the service and delivery? Thanks, folks!

Is it possible to turn off DTMF recognition (and all transfer services etc.) pending on CallerID (or FXS channel)? Some of the FXS channels I will setup soon, is going to work exactly like POTS. It will be used by people not knowing their within Asterisk. They will be pretty confused when "Transfer" is playbacked in the handset. :)