search for: vendorid

Have had no issue until I ran apt-get dist-upgrade this morning: # /lib/nut/newhidups -u nut -DDDDDD auto Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.0.5) debug level is '6' Checking device (0000/0000) (001/001) - VendorID: 0000 - ProductID: 0000 - Manufacturer: unknown - Product: unknown - Serial Number: unknown - Bus: 001 Trying to match device Device does not match - skipping Checking device (0000/0000) (005/001) - VendorID: 0000 - ProductID: 0000 - Manufacturer: unknown - Product: unknown - Serial Number: unknown...

...2.6.1 on Windows 2008 R2 to recognise two APC Smart-UPS 3000 devices connected via USB cables. I have correctly installed libusb-win32, and run the driver wizard. In my ups.conf I have :- [Upper] driver = usbhid-ups port = auto desc = "Upper Smart-UPS 3000" vendorid = 051d serial = "JS1011030553" [Lower] driver = usbhid-ups port = auto desc = "Lower Smart-UPS 3000" vendorid = 051d serial = "JS1011030544" However, this configuration cause the driver to crash. I have further identifed tha...

19.12.2014 05:40, Charles Lepple ?????: > /usr/local/libexec/nut/usbhid-ups -DD -a eaton9sx -x explore 2>&1 | tee /tmp/eaton9sx-explore.log After run, output: 0.000000 debug level is '2' 0.000665 upsdrv_initups... 0.000675 must specify "vendorid" when using "explore" Network UPS Tools - Generic HID driver 0.38 (2.7.2) USB communication driver 0.32 Ok, I run whit vendorid: # /usr/local/libexec/nut/usbhid-ups -DD -a eaton9sx -u root -x explore -x vendorid=0x0463 2>&1 | tee /tmp/eaton9sx-explore.log 0.000000 de...

On Dec 19, 2014, at 5:16 AM, ??????? ??????? <freemgm at gmail.com> wrote: > # /usr/local/libexec/nut/usbhid-ups -DD -a eaton9sx -u root -x explore -x vendorid=0x0463 2>&1 | tee /tmp/eaton9sx-explore.log Ah, I forgot about the vendorid. The string is a regex which must match what is printed by the debug output (case-insensitive) rather than a numerical match, so it should be "-x vendorid=0463". I did not see a potential match for batter...

...None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 232 Device Status: 0x0002 (Bus Powered) Remote Wakeup Enabled config file [upsonicRT1000] #driver=blazer_usb driver=usbhid-ups port=auto vendorid=0xffff productid=0000 #serial=2 #product="1 010937" #vendor=19 #explore desc="UPSonic RT1000" as blazer_usb root at merino:/tmp/aaa# /lib/nut/blazer_usb -DDDD -a upsonicRT1000 Network UPS Tools - Megatec/Q1 protocol USB driver 0...

...output of : sudo /lib/nut/usbhid-ups -a trust -DD this is the output: Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 Error: UPS [trust] is for driver richcomm_usb, but I'm usbhid-ups! i tried to set the ups.conf to: [trust] driver = usbhid-ups port = auto vendorid = 0925 productid = 1234 and i get with sudo /lib/nut/usbhid-ups -a trust -DD the following output: Network UPS Tools - Generic HID driver 0.37 (2.6.4) USB communication driver 0.32 0.000000 debug level is '2' 0.000874 upsdrv_initups... 0.118915 Checking device (1D6B/0001) (005/00...

..."Eaton 5E2000 UPS" Output of "sudo /lib/nut/usbhid-ups -DD -a Eaton5E2000": Network UPS Tools - Generic HID driver 0.38 (2.7.1) USB communication driver 0.32 0.000000 debug level is '2' 0.000272 upsdrv_initups... 0.011069 Checking device (1D6B/0003) (004/001) 0.022373 - VendorID: 1d6b 0.022388 - ProductID: 0003 0.022394 - Manufacturer: unknown 0.022399 - Product: unknown 0.022405 - Serial Number: unknown 0.022410 - Bus: 004 0.022415 Trying to match device 0.022438 Device does not match - skipping 0.022796 Checking device (0463/FFFF) (003/006) 0.023496 - VendorID: 0463 0.02...

...ned Network UPS Tools - Generic HID driver 0.35 (2.6.0) USB communication driver 0.31 0.000000 send_to_all: SETINFO driver.parameter.port "/dev/ttyUSB0" 0.000042 debug level is '5' 0.000309 upsdrv_initups... 0.000613 Checking device (1D6B/0001) (004/001) 0.000639 - VendorID: 1d6b 0.000648 - ProductID: 0001 0.000657 - Manufacturer: unknown 0.000664 - Product: unknown 0.000672 - Serial Number: unknown 0.000681 - Bus: 004 0.000690 Trying to match device 0.000704 Device does not match - skipping 0.000715 Checking device (0B38/0003) (001/008) 0.0...

...s root and after having stopped NUT: # /lib/nut/usbhid-ups -DD -a myups Network UPS Tools - Generic HID driver 0.38 (2.7.2) USB communication driver 0.32 ?? 0.000000??? debug level is '2' ?? 0.000260??? upsdrv_initups... ?? 0.015814??? Checking device (0DB0/A871) (006/004) ?? 0.015838??? - VendorID: 0db0 ?? 0.015842??? - ProductID: a871 ?? 0.015844??? - Manufacturer: unknown ?? 0.015846??? - Product: unknown ?? 0.015848??? - Serial Number: unknown ?? 0.015850??? - Bus: 006 ?? 0.015852??? Trying to match device ?? 0.015856??? Device does not match - skipping ?? 0.015860??? Checking device (0DB...

...s root and after having stopped NUT: # /lib/nut/usbhid-ups -DD -a myups Network UPS Tools - Generic HID driver 0.38 (2.7.2) USB communication driver 0.32 ?? 0.000000??? debug level is '2' ?? 0.000260??? upsdrv_initups... ?? 0.015814??? Checking device (0DB0/A871) (006/004) ?? 0.015838??? - VendorID: 0db0 ?? 0.015842??? - ProductID: a871 ?? 0.015844??? - Manufacturer: unknown ?? 0.015846??? - Product: unknown ?? 0.015848??? - Serial Number: unknown ?? 0.015850??? - Bus: 006 ?? 0.015852??? Trying to match device ?? 0.015856??? Device does not match - skipping ?? 0.015860??? Checking device (0DB...

Hi, i've got similar problem with an OVISLINK 1000VA UPS on Debian. I've tried to connect with it using different drivers and this is what I get with each of them: [UPS] driver = blazer_usb vendorid = 0001 productid = 0000 port = auto subdriver = phoenix sweethome:~# /lib/nut/blazer_usb -a UPS -u root -DDD Network UPS Tools - Megatec/Q1 protocol USB driver 0.08 (2.6.4) 0.000000 debug level is '3' 0.171290 Checking device (1D6B/0001) (005/001) 0.171346 - VendorID: 1d6b 0...

..._to_all: SETINFO driver.parameter.port "auto" 0.000027 send_to_all: SETINFO driver.parameter.productid "3016" 0.000044 debug level is '6' 0.000510 upsdrv_initups... 0.000884 Checking device (09AE/3016) (/dev/usb//dev/ugen1.3) 0.023325 - VendorID: 09ae 0.023348 - ProductID: 3016 0.023353 - Manufacturer: Tripp Lite 0.023357 - Product: TRIPP LITE UPS 0.023363 - Serial Number: unknown 0.023367 - Bus: /dev/usb 0.023371 Trying to match device 0.023398 Device matches 0.023942 Unable to get H...

...g to connect through USB. I just downloaded 2.2.0, but unfortunately I'm getting error messages. All testing was done as root. The driver says (full output is attached): ---SNIP--- eta nut # ./usbhid-ups -x productid=0750 -DDD -a belkin <...cut...> Checking device (050D/0750) (003/007) - VendorID: 050d - ProductID: 0750 - Manufacturer: unknown - Product: unknown - Serial Number: unknown - Bus: 003 Trying to match device Device matches failed to claim USB device, trying 2 more time(s)... detaching kernel driver from USB device... failed to detach kernel driver from USB device... trying again...

On Dec 17, 2014, at 6:58 AM, ??????? ??????? <freemgm at gmail.com> wrote: > OS version: FreeBSD 8.4-RELEASE-p19 > NUT version: nut-2.7.2_6 > NUT installation method: from freebsd pkg system > Device info: EATON 9SX 5000i, manufacturing date: 05.09.2014 > ups.firmware: 9SX5Ki ... > there're lot of data in output, if it needed i can attach in file... Not sure why it

...gues (c) 2003-2007 Serial-over-USB transport layer for Megatec protocol driver [megatec_usb] No supported devices found. Please check your device availability with 'lsusb' and make sure you have an up-to-date version of NUT. If this does not help, try running the driver with at least 'vendorid' and 'subdriver' options specified. Please refer to the man page for details about these options (man 8 megatec_usb). Please report your results to the NUT user's mailing list <nut-upsuser at lists.alioth.debian.org>. # lsusb -v Bus 001 Device 002: ID 0665:5161 Device Descr...

...l: unknown device.type: ups driver.name: richcomm_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.6.4 driver.version.internal: 0.04 ups.mfr: Richcomm dry-contact to USB solution ups.model: UPS USB MON V1.4 ups.productid: 1234 ups.serial: unknown ups.status: OL ups.vendorid: 0925 I cannot get any temperature, voltage or other informations. i searched also on the mailing list and i didn't find anything. Thanks 2016-01-23 1:16 GMT+01:00 Andreas Cattelan <ilmondodiwit at gmail.com>: > Thanks for reply. > > when i try richcomm_usb or blazer_usb o...

...cation of UPS says USB HID compatible. HID driver is the only one which talks with UPS as i try a few from /lib/nut. I use driver usbhid-ups (which communicate with ups), but subdriver resolving is automatic (no subdriver param), as i read source code this driver uses usb manufacture signature (vendorid/productid) to choose subdriver so there was no chance to more tests, just few params (pollonly, pollfreq, maxreport). But... Help needed ! OS: Debian Jessie (Proxmox 4.3 distro) NUT: 2.7.2 driver: usbhid-ups #cat ups.conf [ups] driver = usbhid-ups port = auto vendorid = 06da productid = 0...

...jessie apt-cache policy nut-server: nut-server: Installed: 2.7.2-4 Candidate: 2.7.2-4 Version table: *** 2.7.2-4 0 500 http://mirrordirector.raspbian.org/raspbian/ jessie/main armhf Packages 100 /var/lib/dpkg/status config: [powerwalker] driver = blazer_usb vendorid = 06da port = auto desc = "Powerwalker VI 2200VA LCD" productid = ffff bus = "001" /lib/nut/blazer_usb -a powerwalker -DDDD: Network UPS Tools - Megatec/Q1 protocol USB driver 0.11 (2.7.2) 0.000000 debug level is '4' 0.011658 C...

...; void upsdrv_initups(void) { int i; #ifndef SHUT_MODE /*! * SHUT is only supported by MGE UPS SYSTEMS units * So we don't need the regex mechanism */ int r; char *regex_array[5]; ^^^^^^^^^^^^^^^ => should be 6 /* enforce use of the "vendorid" option if "generic" is given */ if (testvar("generic") && getval("vendorid")==NULL) { fatalx("must specify \"vendorid\" when using \"generic\""); } /* process the UPS selection options */ reg...

...6.x86_64 #1 SMP UPS: Fortron FSP EP 850 with usb connection (http://www.fsplifestyle.com/product.php?LID=1&PSN=74) NUT installed from official repository, version: nut-2.6.3-2.fc16.x86_64. ups.conf: [EP850] driver = blazer_usb port = auto desc = "FSP EP 850" vendorid = 0665 productid = 5161 Output of command lsusb -v -d 0665:5161: Bus 004 Device 010: ID 0665:5161 Cypress Semiconductor USB to Serial Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface...