Nut upsuser - Dec 2014 - EATON 9SX not display battery.charge

19.12.2014 05:40, Charles Lepple ?????:
> /usr/local/libexec/nut/usbhid-ups -DD -a eaton9sx -x explore 2>&1 |
tee /tmp/eaton9sx-explore.log
After run, output:

0.000000     debug level is '2'
    0.000665     upsdrv_initups...
    0.000675     must specify "vendorid" when using
"explore"
Network UPS Tools - Generic HID driver 0.38 (2.7.2)
USB communication driver 0.32

Ok, I run whit vendorid:

# /usr/local/libexec/nut/usbhid-ups -DD -a eaton9sx -u root -x explore 
-x vendorid=0x0463 2>&1 | tee /tmp/eaton9sx-explore.log

  0.000000     debug level is '2'
    0.000646     upsdrv_initups...
    0.001154     Checking device (0463/FFFF) (/dev/usb//dev/ugen1.3)
    0.266807     - VendorID: 0463
    0.266819     - ProductID: ffff
    0.266824     - Manufacturer: EATON
    0.266828     - Product: Eaton 9SX
    0.266833     - Serial Number: G200E36025
    0.266838     - Bus: /dev/usb
    0.266843     Trying to match device
    0.266865     Device does not match - skipping
    0.266890     Checking device (046D/C31C) (/dev/usb//dev/ugen1.2)
    0.295825     - VendorID: 046d
    0.295846     - ProductID: c31c
    0.295851     - Manufacturer: Logitech
    0.295856     - Product: USB Keyboard
    0.295860     - Serial Number: unknown
    0.295865     - Bus: /dev/usb
    0.295870     Trying to match device
    0.295881     Device does not match - skipping
    0.295919     Checking device (04B4/6560) (/dev/usb//dev/ugen3.2)
    0.295987     - VendorID: 04b4
    0.295995     - ProductID: 6560
    0.296000     - Manufacturer: unknown
    0.296004     - Product: unknown
    0.296008     - Serial Number: unknown
    0.296013     - Bus: /dev/usb
    0.296026     Trying to match device
    0.296048     Device does not match - skipping
    0.296065     Checking device (0000/0000) (/dev/usb//dev/ugen3.1)
    0.296123     - VendorID: 0000
    0.296131     - ProductID: 0000
    0.296136     - Manufacturer: Intel
    0.296140     - Product: EHCI root HUB
    0.296145     - Serial Number: unknown
    0.296150     - Bus: /dev/usb
    0.296163     Trying to match device
    0.296173     Device does not match - skipping
    0.296192     Checking device (0000/0000) (/dev/usb//dev/ugen2.1)
    0.296255     - VendorID: 0000
    0.296263     - ProductID: 0000
    0.296267     - Manufacturer: Intel
    0.296271     - Product: UHCI root HUB
    0.296275     - Serial Number: unknown
    0.296279     - Bus: /dev/usb
    0.296284     Trying to match device
    0.296290     Device does not match - skipping
    0.296305     Checking device (0000/0000) (/dev/usb//dev/ugen1.1)
    0.296351     - VendorID: 0000
    0.296359     - ProductID: 0000
    0.296363     - Manufacturer: Intel
    0.296367     - Product: UHCI root HUB
    0.296371     - Serial Number: unknown
    0.296375     - Bus: /dev/usb
    0.296396     Trying to match device
    0.296402     Device does not match - skipping
    0.296417     Checking device (0000/0000) (/dev/usb//dev/ugen0.1)
    0.296462     - VendorID: 0000
    0.296467     - ProductID: 0000
    0.296471     - Manufacturer: Intel
    0.296474     - Product: UHCI root HUB
    0.296478     - Serial Number: unknown
    0.296482     - Bus: /dev/usb
    0.296486     Trying to match device
    0.296491     Device does not match - skipping
    0.296504     No appropriate HID device found
Network UPS Tools - Generic HID driver 0.38 (2.7.2)
USB communication driver 0.32
    0.296524     No matching HID UPS found


But whitout explore mode, debug started:

  /usr/local/libexec/nut/usbhid-ups -DD -u root -a eaton9sx 2>&1 | tee 
/tmp/eaton9sx-explore.log

Output in attached file.

I'm tested device whith rs232 cable and on Synology DS213+ (usb) - 
result is the same, device detected perfect and ups.status present, but 
no battery.charge and no runtime, etc.

-- 
? ?????????, ???????.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: eaton9sx-without-explore-log.tar.gz
Type: application/x-gzip
Size: 9596 bytes
Desc: not available
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20141219/5624905a/attachment-0001.bin>

On Dec 19, 2014, at 5:16 AM, ??????? ??????? <freemgm at gmail.com> wrote:
> # /usr/local/libexec/nut/usbhid-ups -DD -a eaton9sx -u root -x explore -x
vendorid=0x0463 2>&1 | tee /tmp/eaton9sx-explore.log
Ah, I forgot about the vendorid. The string is a regex which must match what is
printed by the debug output (case-insensitive) rather than a numerical match, so
it should be "-x vendorid=0463".

I did not see a potential match for battery.charge in the non-explore output,
but can you try again with the fixed vendorid and "-DDD"?

-- 
Charles Lepple
clepple at gmail

Ok. Thats new command (all done in explore mode fine):

/usr/local/libexec/nut/usbhid-ups -DDD -a eaton9sx -u root -x explore -x 
vendorid=0463 2>&1 | tee /tmp/eaton9sx-explore.log

and output in attach.
Thnx


19.12.2014 15:39, Charles Lepple ?????:
> On Dec 19, 2014, at 5:16 AM, ??????? ??????? <freemgm at gmail.com>
wrote:
>
>> # /usr/local/libexec/nut/usbhid-ups -DD -a eaton9sx -u root -x explore
-x vendorid=0x0463 2>&1 | tee /tmp/eaton9sx-explore.log
> Ah, I forgot about the vendorid. The string is a regex which must match
what is printed by the debug output (case-insensitive) rather than a numerical
match, so it should be "-x vendorid=0463".
>
> I did not see a potential match for battery.charge in the non-explore
output, but can you try again with the fixed vendorid and "-DDD"?
>
-- 
? ?????????, ???????.

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20141219/db1c3243/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: eaton9sx-explore-DDD.tar.gz
Type: application/x-gzip
Size: 11243 bytes
Desc: not available
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20141219/db1c3243/attachment.bin>

Any news?

Send dubug with explore one more time
in attach


19.12.2014 15:39, Charles Lepple ?????:
> On Dec 19, 2014, at 5:16 AM, ??????? ??????? <freemgm at gmail.com>
wrote:
>
>> # /usr/local/libexec/nut/usbhid-ups -DD -a eaton9sx -u root -x explore
-x vendorid=0x0463 2>&1 | tee /tmp/eaton9sx-explore.log
> Ah, I forgot about the vendorid. The string is a regex which must match
what is printed by the debug output (case-insensitive) rather than a numerical
match, so it should be "-x vendorid=0463".
>
> I did not see a potential match for battery.charge in the non-explore
output, but can you try again with the fixed vendorid and "-DDD"?
>
-- 
? ?????????, ???????.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: eaton9sx-explore-DDD.tar.gz
Type: application/x-gzip
Size: 11243 bytes
Desc: not available
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20141229/c5473653/attachment.bin>