Works with nutdrv_qx ..YEAH :-)
Its a bit quirky to reply myself but maybe this can help someone.
I tried to find all distro's HID drivers:
#grep HID /lib/nut/*
Binary file /lib/nut/blazer_usb matches
Binary file /lib/nut/mge-shut matches
Binary file /lib/nut/nutdrv_qx matches
Binary file /lib/nut/oldmge-shut matches
Binary file /lib/nut/riello_usb matches
Binary file /lib/nut/tripplite_usb matches
Binary file /lib/nut/usbhid-ups matches
..and then tried nutdrv_qx
[ups]
driver = nutdrv_qx
port = auto
vendorid = 06da
productid = 0005
#upsdrvctl start
Network UPS Tools - UPS driver controller 2.7.2
Network UPS Tools - Generic Q* USB/Serial driver 0.06 (2.7.2)
USB communication driver 0.32
Using protocol: Q1 0.02
Can't autodetect number of battery packs [-1/2.31]
Battery runtime will not be calculated (runtimecal not set)
Finally...
ups.conf:
[ups]
# UPS: PowerWalker VFI 2000 RT LCD
driver = nutdrv_qx
port = auto
vendorid = 06da
productid = 0005
protocol = megatec
novendor
pollfreq = 30
override.battery.packs = 24
runtimecal = 180,100,600,50
#/etc/init.d/nut-server stop
#/etc/init.d/nut-server start
# upsc ups
Init SSL without certificate database
battery.charge: 100
battery.packs: 24
battery.runtime: 1800
battery.voltage: 2.32
battery.voltage.high: 52.00
battery.voltage.low: 41.60
battery.voltage.nominal: 48.0
device.type: ups
driver.flag.novendor: enabled
driver.name: nutdrv_qx
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.productid: 0005
driver.parameter.protocol: megatec
driver.parameter.runtimecal: 180,100,600,50
driver.parameter.vendorid: 06da
driver.version: 2.7.2
driver.version.data: Megatec 0.01
driver.version.internal: 0.06
input.current.nominal: 8.0
input.frequency: 49.9
input.frequency.nominal: 50
input.voltage: 238.4
output.voltage: 229.9
ups.beeper.status: enabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.load: 8
ups.productid: 0005
ups.status: OL
ups.temperature: 20.0
ups.type: online
ups.vendorid: 06da
--
Pozdrawiam/Regards
Krzysztof Pisarek, KLL
-------------------------
E-mail: kp at kll.pl
-------------------------
W dniu 2017-01-19 15:27, KP napisa?(a):
> Hi all,
>
> I have problem with UPS from PowerWalker model VFI 2000 RT LCD over USB
(didn't try serial yet).
>
> UPS should work via HID driver but ups.status is not rendered properly.
> Specification of UPS says USB HID compatible.
>
> HID driver is the only one which talks with UPS as i try a few from
/lib/nut.
>
> I use driver usbhid-ups (which communicate with ups), but subdriver
resolving is automatic (no subdriver param), as i read source code this driver
uses usb manufacture signature (vendorid/productid) to choose subdriver so there
was no chance to more tests, just few params (pollonly, pollfreq, maxreport).
>
> But... Help needed !
>
> OS: Debian Jessie (Proxmox 4.3 distro)
> NUT: 2.7.2
> driver: usbhid-ups
>
> #cat ups.conf
> [ups]
> driver = usbhid-ups
> port = auto
> vendorid = 06da
> productid = 0005
> pollonly
> pollfreq = 15
>
> # lsusb
> Bus 001 Device 003: ID 06da:0005 Phoenixtec Power Co., Ltd
> [..cut..]
>
> When UPS is Online:
> # upsc ups
> Init SSL without certificate database
> device.mfr: PPC
> device.model: USB UPS
> device.type: ups
> driver.flag.pollonly: enabled
> driver.name: usbhid-ups
> driver.parameter.pollfreq: 15
> driver.parameter.pollinterval: 2
> driver.parameter.port: auto
> driver.parameter.productid: 0005
> driver.parameter.vendorid: 06da
> driver.version: 2.7.2
> driver.version.data: Liebert HID 0.3
> driver.version.internal: 0.38
> ups.mfr: PPC
> ups.model: USB UPS
> ups.productid: 0005
> ups.status: OB
> ups.vendorid: 06da
>
> The ups.status is permanently OB, there is no change when UPS goes OL/OB.
>
> Explore mode output below:
>
> # /lib/nut/usbhid-ups -a ups -DDDDD
> Network UPS Tools - Generic HID driver 0.38 (2.7.2)
> USB communication driver 0.32
> 0.000000 debug level is '5'
> 0.000230 upsdrv_initups...
> 0.059356 Checking device (413C/2106) (002/003)
> [..cut..]
> 0.059565 Device does not match - skipping
> 0.059569 Checking device (06DA/0005) (001/003)
> 0.060812 - VendorID: 06da
> 0.060822 - ProductID: 0005
> 0.060826 - Manufacturer: PPC
> 0.060830 - Product: USB UPS
> 0.060833 - Serial Number: unknown
> 0.060837 - Bus: 001
> 0.060841 Trying to match device
> 0.060869 Device matches
> 0.061313 HID descriptor, method 1: (9 bytes) => 09 21 11 01 00 01 22 1b
00
> 0.061317 i=0, extra[i]=09, extra[i+1]=21
> 0.061319 HID descriptor, method 2: (9 bytes) => 09 21 11 01 00 01 22 1b
00
> 0.061321 HID descriptor length 27
> 0.061693 Report Descriptor size = 27
> 0.061698 Report Descriptor: (27 bytes) => 06 a0 ff 09 04 a1 01 09 06 15
00 26 ff 00
> 0.061721 75 08 95 08 81 82 09 07 95 40 91 82 c0
> 0.061781 Using subdriver: EXPLORE HID 0.1
> 0.061785 Entering libusb_get_report
> 0.061939 Can't retrieve Report 00: Broken pipe
> 0.061944 hid_lookup_path: ffa00004 -> not found in lookup table
> 0.061954 hid_lookup_path: ffa00006 -> not found in lookup table
> 0.061962 Path: ffa00004.ffa00006, Type: Input, ReportID: 0x00, Offset: 0,
Size: 8
> 0.061965 Entering libusb_get_report
> 0.062310 Can't retrieve Report 00: Broken pipe
> 0.062314 hid_lookup_path: ffa00004 -> not found in lookup table
> 0.062316 hid_lookup_path: ffa00007 -> not found in lookup table
> 0.062318 Path: ffa00004.ffa00007, Type: Output, ReportID: 0x00, Offset: 0,
Size: 8
> 0.062339 send_to_all: SETINFO ups.mfr "PPC"
> 0.062345 send_to_all: SETINFO ups.model "USB UPS "
> 0.062348 send_to_all: SETINFO ups.vendorid "06da"
> 0.062368 send_to_all: SETINFO ups.productid "0005"
> 0.062370 Report descriptor retrieved (Reportlen = 27)
> 0.062373 Found HID device
> 0.062376 Detected a UPS: PPC/USB UPS
> 0.062379 find_nut_info: unknown info type: load.off.delay
> 0.062381 find_nut_info: unknown info type: load.on.delay
> 0.062385 find_nut_info: unknown info type: load.off.delay
> 0.062407 send_to_all: SETINFO device.type "ups"
> 0.062411 send_to_all: SETINFO driver.version "2.7.2"
> 0.062415 send_to_all: SETINFO driver.version.internal "0.38"
> 0.062443 send_to_all: SETINFO driver.name "usbhid-ups"
> 0.062446 upsdrv_initinfo...
> 0.062450 send_to_all: SETINFO driver.version.data "EXPLORE HID
0.1"
> 0.062458 upsdrv_updateinfo...
> 0.062461 Not using interrupt pipe...
> 0.062465 Quick update...
> 0.062469 send_to_all: SETINFO ups.status "OB"
> 0.062472 send_to_all: DATAOK
> 0.062497 dstate_init: sock /var/run/nut/usbhid-ups-ups open on fd 5
> 0.062501 send_to_all: SETINFO driver.parameter.pollinterval "2"
> 0.062505 send_to_all: SETINFO device.mfr "PPC"
> 0.062509 send_to_all: SETINFO device.model "USB UPS "
> 0.062513 upsdrv_updateinfo...
> 0.062516 Not using interrupt pipe...
> 0.062518 Quick update...
> 0.228313 new connection on fd 6
> 0.228325 send_to_one: SETINFO device.mfr "PPC"
> 0.228347 send_to_one: SETINFO device.model "USB UPS "
> 0.228350 send_to_one: SETINFO device.type "ups"
> 0.228354 send_to_one: SETINFO driver.flag.explore "enabled"
> 0.228375 send_to_one: SETINFO driver.flag.pollonly "enabled"
> 0.228380 send_to_one: SETINFO driver.name "usbhid-ups"
> 0.228385 send_to_one: SETINFO driver.parameter.pollfreq "15"
> 0.228404 send_to_one: SETINFO driver.parameter.pollinterval "2"
> 0.228408 send_to_one: SETINFO driver.parameter.port "auto"
> 0.228413 send_to_one: SETINFO driver.parameter.productid "0005"
> 0.228434 send_to_one: SETINFO driver.parameter.vendorid "06da"
> 0.228439 send_to_one: SETINFO driver.version "2.7.2"
> 0.228444 send_to_one: SETINFO driver.version.data "EXPLORE HID
0.1"
> 0.228447 send_to_one: SETINFO driver.version.internal "0.38"
> 0.228458 send_to_one: SETINFO ups.mfr "PPC"
> 0.228466 send_to_one: SETINFO ups.model "USB UPS "
> 0.228473 send_to_one: SETINFO ups.productid "0005"
> 0.228481 send_to_one: SETINFO ups.status "OB"
> 0.228484 send_to_one: SETINFO ups.vendorid "06da"
> 0.228490 send_to_one: DATAOK
> 0.228494 send_to_one: DUMPDONE
> 2.064395 upsdrv_updateinfo...
> 2.064412 Not using interrupt pipe...
> 2.064417 Quick update...
> 4.066426 upsdrv_updateinfo...
> 4.066433 Not using interrupt pipe...
> 4.066435 Quick update...
> 6.068457 upsdrv_updateinfo...
> 6.068464 Not using interrupt pipe...
> 6.068466 Quick update...
> 8.070504 upsdrv_updateinfo...
> 8.070522 Not using interrupt pipe...
> 8.070527 Quick update...
> 10.072535 upsdrv_updateinfo...
> 10.072543 Not using interrupt pipe...
> 10.072545 Quick update...
> [...]
>
> Explore mode off:
>
> # upsdrvctl start
> Network UPS Tools - UPS driver controller 2.7.2
> Network UPS Tools - Generic HID driver 0.38 (2.7.2)
> USB communication driver 0.32
> Using subdriver: Liebert HID 0.3
>
> Is there chance to try other subdriver then Liebert or make it work
properly with this UPS?
>
> --
>
> Pozdrawiam/Regards
> Krzysztof Pisarek, KLL
>
> -------------------------
> E-mail: kp at kll.pl
> -------------------------
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser [1]
Links:
------
[1] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20170119/1d7d1944/attachment-0001.html>