search for: unpowered

...me. Polycom must have some odd voltage or funny way of injecting the power, because the POE switch I bought for them (Netgear F@510P) won't power them, though if I use the Polycom-supplied AC adapter and ethernet power injector cable, they work with the switch in either its powered or unpowered ports. Anyhow, I hadn't seen any mention of how people power these phones, as I had planned on centralizing phone power on a UPS to supply my Asterisk server and POE switch. Now the question is: Can the Polycom AC-powered injector be used with a standard ethernet patch cable: switch...

...:24 AM, Rafal Oleszek wrote: > I tried all options: > 1,2 > and in MINSUPPLIES: 1,2,3,4 > still didn't work. My mistake - I gave you the wrong advice before. For MINSUPPLIES, I'm used to either a 1:1 UPS-to-server ratio, or 2:1 where the server can run with either power supply unpowered. I just tried this in upsmon.conf: MONITOR dummy1 1 monuser password slave MONITOR dummy2 1 monuser password slave MINSUPPLIES 1 With only one dummy-ups set to "OB LB", upsmon kept polling. When both were set to "OB LB", it tried to shut down the system. That was with NUT 2....

Hello, We have two APC Back-UPS RS 1500 USB stuff, and i've got a bit of a problem with it and NUT. The usbdevs output: addr 2: Back-UPS RS 1500 FW:8.g8 .I USB FW:g8, American Power Conversion addr 3: Back-UPS RS 1500 FW:8.g8 .I USB FW:g8, American Power Conversion (UPS1 and UPS2) I've configured our NUT system to monitor the UPSes, and it went very fine till the time had arrived for a

On Jan 21, 2014, at 8:05 AM, Rafa? Oleszek wrote: > MONITOR UPS_251 at localhost 2 monmaster password master > MONITOR UPS_252 at localhost 2 monmaster password master I think the "2"s here should be "1". "powervalue is an integer representing the number of power supplies that the UPS feeds *on this system*." So if UPS_251 is connected to one power supply on

I tried all options: 1,2 and in MINSUPPLIES: 1,2,3,4 still didn't work. UPS_251 and UPS_252 feeds all environment and it's not feed directly one server, but many of them. > On Jan 21, 2014, at 8:05 AM, Rafa? Oleszek wrote: > >> MONITOR UPS_251 at localhost 2 monmaster password master >> MONITOR UPS_252 at localhost 2 monmaster password master > > I think the

I have a strange problem rolling through my 7960 phones. One or more of the phones goes crazy when the first digit is dialed. The display flashes repeatedly, the phone does a bunch of stuff, sometimes it even reboots. It's not the powered switch, the same thing happens with a different unpowered switch. It's not the phone, the problem moves from phone to phone. If it's happening to a phone and I restart everything, when everything is back up a different phone will have the problem. has anyone seen this? Thanks! Paul Paul Mahler pmahler@signate.com -------------- n...

I'm experiencing a very unusual problem with a few of my sipuras. They keep over heating after minimal usage. I unplug them and let them sit for 15 minutes and it starts working fine. The other way around is that I put a fan on it or something to keep it cooling. Has anyone else experienced this or are they just defective units? Regards, Mohammed Salim EZZI Telecom, Inc.

I set up IDE software-RAID on a test machine for testing the recover functionality. The problem is that it somehow won't boot after removing the first disk, although grub etc. seems to be setup okay. Here's some background: 2 disks hda and hdb RAID 1 setup: /dev/md0 (hda1 + hdb1) /boot /dev/md1 (hda2 + hdb2) / /dev/md2 (hda3 + hdb3) swap done with disk druid during initial setup from

...gt; I tried all options: >> 1,2 >> and in MINSUPPLIES: 1,2,3,4 >> still didn't work. > > My mistake - I gave you the wrong advice before. For MINSUPPLIES, I'm used > to either a 1:1 UPS-to-server ratio, or 2:1 where the server can run with > either power supply unpowered. > > I just tried this in upsmon.conf: > > MONITOR dummy1 1 monuser password slave > MONITOR dummy2 1 monuser password slave > MINSUPPLIES 1 > > With only one dummy-ups set to "OB LB", upsmon kept polling. When both > were set to "OB LB", it tried to s...

Battery life sucks. This may be due to three factors: 1. It was the first charge that the machine had 2. Playing Vorbis takes more battery power than MP3 3. The battery is a bit rubbish More considered opinions to follow. Phil Hibbs Cap Gemini Ernst & Young Aston, UK <p>======================================================= This message contains information that may be privileged

...ed - FIQ reported NYET. Data may have been lost. And recordings were choppy, clicking etc. This is all running the Pi at normal setup with USB2 enabled and Xenyx USB directly connected to the Pi with a 1.5m usb A-B cable. Then, I connected a usb hub to the Pi and then the Xenyx USB to the hub. Unpowered el cheapo hub. Tried another al cheapo crappy usb2 hub that never worked when connecting it between a UMTS dongle and a PC (dongle just would get up and running, probably power issues). Both did the magic trick: recording now works like a charm. Once did I see an "overrun!!! (at least 1055...

Hi u, On Thu, 22 Jan 2015, unosonic wrote: > well, sort of, with a PI, Ices2 as a client, and an USB audio device as > input, e.g. a "class compliant" audio recoder like Olympus LS5, Zoom H2 > etc., but also a little mixer like the Behringer Xenyx 302 USB. > The problem i've encountered is with USB class1 devices, i.e. so called > "full speed" USB (which is

http://bugs.freedesktop.org/show_bug.cgi?id=12875 Summary: swfdec-mozilla-0.5.3: cpu hog and reports incorrect youtube video length Product: swfdec Version: 0.5.3 Platform: x86-64 (AMD64) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: plugin

Hi listers, I am looking for people who have used Power over Ethernet switches, primarily in conjunction with Polycom IP 501's. I've been looking at the Linksys SRW224P, since I've had good luck with the SRW224 in our office. However, Nortel, Cisco, Adtran, etc. all have an offering, all of which vary in price. I would appreciate any input people have to offer. Thanks, James

Slightly OT, but I think this is of possible interest to many of you, I need to get a UPS for my asterisk box. They are rated in VA but I can't quite figure out how that converts to real life. I have a PIII-800 box with two X100P and one TDM400P plus graphics adapter, an IDE hard drive etc. Will a small 400VA box be enough for this? tia