search for: udpport

...nfig files with several echos with redirection: On Fri, Feb 6, 2009 at 20:37, J Potter <jpotter-centos at codepuppy.com> wrote: > echo "node a.example.com" > /etc/ha.d/ha.cf > echo "node b.example.com" >> /etc/ha.d/ha.cf > echo "udpport 9000" >> /etc/ha.d/ha.cf > echo "bcast bond0" >> /etc/ha.d/ha.cf > echo "auto_failback off" >> /etc/ha.d/ha.cf > echo "logfile /var/log/ha-log" >> /etc/ha.d/ha.cf > echo "logfacility local0&q...

...= NO PCISLOT = 4 PCIBUS = 15 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = NCRC4 FE_LINE = 1 TE_CLOCK = MASTER TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 120OH TE_SIG_MODE = CCS FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 0 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES # zaptel.conf loadzone=uk defaultzone=uk span=1,1,0,ccs,hdb3 bchan=1-31 ### ss7.conf [linkset-ennie] enabled => yes us...

...= NO PCISLOT = 1 PCIBUS = 16 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = CRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 TDMV_HW_DTMF = NO [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES wanpipe3 and 4: [devices] wanpipe3 = WAN_AFT_TE1, Comment [interfaces] w3g1 = wanpipe3, , TDM_VOICE, C...

...= AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 4 PCIBUS = 9 FE_MEDIA = T1 FE_LCODE = B8ZS FE_FRAME = ESF FE_LINE = 3 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 0DB FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 7 TDMV_DCHAN = 0 TDMV_HW_DTMF = YES [w7g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES Here is /etc/dahdi/system.conf loadzone=us defaultzone=us #Sangoma A104 port 3 [slot:4 bus:9 span:7] <wanpipe7> spa...

...g1 = wanpipe1, , TDM_VOICE, Comment [wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 4 PCIBUS = 1 FE_MEDIA = T1 FE_LCODE = B8ZS FE_FRAME = ESF FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 0DB FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 0 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES wanpipe2.conf: [devices] wanpipe2 = WAN_AFT_TE1, Comment [interfaces] w2g1 = wanpipe2, , TDM_VOICE, Comment [wanpipe2] CARD_TYPE = AFT S514CPU = A CommPort = PRI A...

...5 heartbeat-2.1.4-11.el5 I have /etc/ha/.d authkeys setup this way: # auth 2 #1 crc 2 sha1 {SHA}secret I have /etc/ha.d/resources setup like this: VIRTCENT01.summitnjhome.com 192.168.1.23 And I have /etc/ha.cf setup like this: # What UDP port to use for udp or ppp-udp communication? # udpport 694 bcast eth0 mcast eth0 225.0.0.1 694 1 0 ucast eth0 192.168.1.200 # What interfaces to heartbeat over? udp eth0 # # Facility to use for syslog()/logger (alternative to log/debugfile) # logfacility local0 # # Tell what machines are in the cluster # node...

...= NO PCISLOT = 1 PCIBUS = 4 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = NCRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES thanks for your help. -- ------------------------------------------------------------ Erick Perez ------------------------...

Hi, I'm new at Wine and Ubuntu, so please have some patience with me. I've tried to install Sage Retail 2011 with wine but the installation fails. The Terminal shows this: Code: bruno at bruno-Aspire-1680:~/Transfer?ncias$ wine /home/bruno/Transfer?ncias/SetupSageRetail2011.exe fixme:advapi:DecryptFileA "C:\\windows\\temp\\IXP000.TMP\\" 00000000 fixme:advapi:LsaOpenPolicy

...VOICE, Comment [wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = YES PCISLOT = 1 PCIBUS = 1 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = CRC4 FE_LINE = 1 TE_CLOCK = NORMAL ACTIVE_CH = ALL TE_HIGHIMPEDANCE = NO INTERFACE = V35 CLOCKING = EXTERNAL BaudRate = 2048 MTU = 2048 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO [w1g1] PROTOCOL = HDLC HDLC_STREAMING = NO ACTIVE_CH = ALL IDLE_FLAG = 0x7E MTU = 2048 MRU = 2048 TDMV_SPAN = 1 TDMV_ECHO_OFF = NO MULTICAST = NO TRUE_ENCODING_TYPE = NO when i start sangoma card (wanrouter start). the system run overload (CPU = 100)...

...= NO PCISLOT = 1 PCIBUS = 4 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = NCRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES thanks for your help. -- ------------------------------------------------------------ Erick Perez ------------------------...

I upgraded from Tormenta2 to Sangoma A101. I followed the instructions, and installation was successful. zttool, ztcfg, all show card is installed properly. I copied the parameters from my old working zaptel.conf, zapata.conf and zapata-auto.conf. Verified on Sangoma website that these files are correct. Also configured wanpipe1.conf. But doing all this didn't start the PRI channels. It says

...ANALOG, Comment [interfaces] w1g1 = wanpipe1, , TDM_VOICE, Comment [wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 6 PCIBUS = 1 FE_MEDIA = FXO/FXS TDMV_LAW = MULAW TDMV_OPERMODE = FCC MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = NO

...= 4 PCIBUS = 13 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = NCRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 TDMV_HW_DTMF = NO TDMV_HW_FAX_DETECT = NO [w1g1] ACTIVE_CH = ALL TDMV_HWEC = NO ==end wanpipe1.conf ==================== ==begin zapata.conf ==================== [trunk...

...fig file "/etc/xen/breezy". Started domain breezy Linux version 2.6.12-xenU (nic@wuwei) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #3 SMP Thu Oct 13 14:56:20 NZDT 2005 kernel direct mapping tables upto 10000000 @ 568000-5ea000 Built 1 zonelists Kernel command line: root=/dev/sda1 ro 4 lockd.udpport=32768 lockd.tcpport=32768 Unknown boot option `lockd.udpport=32768'': ignoring Unknown boot option `lockd.tcpport=32768'': ignoring Initializing CPU#0 PID hash table entries: 2048 (order: 11, 65536 bytes) Xen reported: 2194.794 MHz processor. Dentry cache hash table entries: 65536 (...

...= PRI AUTO_PCISLOT = NO PCISLOT = 13 PCIBUS = 6 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = NCRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES goksie

Hi Karl, Thanks for your help, About the "Connection:" header, you are right, it's: "Connection: close" and NOT "Connection: keep-alive". The protocol when the SERVER sends the data is http 1.0. It's http 1.1 when the browser requests the data. I don't understand the "Content-Length: 54000000" header either. Also I noticed the flash player on

...= 4 PCIBUS = 5 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = NCRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO TE_RX_SLEVEL = 430 LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 0 TDMV_HW_DTMF = NO # YES: receive dtmf events from hardware TDMV_HW_FAX_DETECT = NO # YES: receive fax 1100hz events from hardware [w1g1] A...

...4 AttemptPNAvMulticast=1 AttemptPNAvUDP=1 AttemptPNAvTCP=1 AttemptPNAvHTTP=1 PNAProxySupport=0 PNAProxyHost= PNAProxyPort=1090 HTTPProxySupport=0 HTTPProxyHost= HTTPProxyPort=80 LiveSuperBuffer=1 rpregistered=1 TurboPlay=1 SoundDriver=3 AutoBWDetection=1 DisableMultiChannelPlayback=1 Quality=10 UseUDPPort=0 UDPPort=7070 NoProxyFor= PerfPlayEntireClip=0 BufferedPlayTime=10 CookiesEnabled=1 AllowAuthID=0 CacheEnabled=1 CacheMaxSize=4 ConnectionTimeOut=20 SynchMM=1 TrueLive=1 Alsa51PCMDeviceName=hdmi:CARD%3dNVidia,DEV%3d7 OSSPCMElementName=/dev/dsp OSSMixerElementName=/dev/mixer Language=en-us caption_...

...1:57] [19:Connection Handler] DEBUG: Adding varpair [Location] == [http://192.168.1.10:8000/stream2] [23/Apr/2003:20:01:57] [19:Connection Handler] DEBUG: Adding varpair [User-agent] == [Sonique 1.50 (no stream save)] [23/Apr/2003:20:01:57] [19:Connection Handler] DEBUG: Adding varpair [x-audiocast-udpport] == [3005] [23/Apr/2003:20:01:57] [19:Connection Handler] DEBUG: Adding varpair [From] == [@rachel] [23/Apr/2003:20:01:57] [19:Connection Handler] DEBUG: Checking need for authentication on mount /stream2 [23/Apr/2003:20:01:57] [19:Connection Handler] DEBUG: get_icecast_file(): Looking for /usr/loc...

...AN_AFT, Comment [interfaces] w1g1 = wanpipe1, , TDM_VOICE, Comment [wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = YES PCISLOT = 2 PCIBUS = 1 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = CRC4 FE_LINE = 1 TE_CLOCK = NORMAL ACTIVE_CH = ALL TE_HIGHIMPEDANCE = YES MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 0 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO I start wanrouter, the card connected success, monitor on E10 exchange (ACATEL), the status of all channels are LIBR. when i dial to asterisk, error show as belows *CLI> Warning,...