search for: tty0

...crashes and starts rebooting recursively. I have tried both the entries listed below. I am using the following entries in the grub.conf file: title Xen-bhatia 3.0 / XenLinux-bhatia 2.6.16 root (hd0,0) kernel /bhatia/boot/xen-3.0.gz dom0_mem=262144 console=ttyS0,9600n8 console=tty0 module /bhatia/boot/vmlinuz-2.6-xen root=/dev/VolGroup00/LogVol00 rhgb quiet console=ttyS0,9600n8 console=tty0 title Xen 3.0 / XenLinux 2.6.16 root (hd0,0) kernel /xen.gz dom0_mem=262144 console=ttyS0,9600n8 console=tty0 module /vmlinuz-2.6-xen root=/dev/VolGroup00/L...

...t to any key, even Ctrl+Alt+Del doesn't work. The config is pretty simple: ------------------------------------------- SAY Booting Linux from USB... KERNEL /boot/vmlinuz DEFAULT Vaio PROMPT 1 LABEL Black KERNEL /boot/vmlinuz APPEND ro initrd=/boot/initramfs console=ttyS0,38400 console=tty0 vga=0x307 HOST=Black LABEL Vaio KERNEL /boot/vmlinuz APPEND ro initrd=/boot/initramfs console=ttyS0,38400 console=tty0 vga=0x305 HOST=Vaio ------------------------------------------- With "PROMPT 0", it boots without problems. As the same configuration works well with my PC, I...

...TIMEOUT value of 500 should mean 50 seconds, as it counts in 1/10th of a second, right?) SYSLINUX (isolinux) 2.00 ----8<------8<---- SERIAL 0 38400 TIMEOUT 500 DISPLAY about.txt F1 help.txt DEFAULT t LABEL t KERNEL /isolinux/kernel.lnx APPEND console=ttyS0,38400n8 console=tty0 hda=dma,ata100 hdb=dma,ata100 hdc=nodma init=/installer root=/dev/hdc ro devfs=nomount LABEL s KERNEL /isolinux/kernel.lnx APPEND console=tty0 console=ttyS0,38400n8 hda=dma,ata100 hdb=dma,ata100 hdc=nodma init=/installer root=/dev/hdc ro devfs=nomount LABEL setup KERNEL /...

Hi! I compiled 2.6.22.1 kernel on my CentOS 4.5 box, during boot up, rc.sysinit complains cannot find /dev/tty0 to get keymap (line 294), and I cannot login to the box via ssh, the passwd authentication do pass, but no console opened, ssh just hangs, and "ps ax" on the CentOS box shows "sshd at notty". There are only these ttys: crw-rw-rw- 1 root root 5, 0 2007-07-12 /dev/tty crw--w--...

...The config is pretty simple: > > ------------------------------------------- > SAY Booting Linux from USB... > KERNEL /boot/vmlinuz > DEFAULT Vaio > PROMPT 1 > > LABEL Black > KERNEL /boot/vmlinuz > APPEND ro initrd=/boot/initramfs console=ttyS0,38400 console=tty0 > vga=0x307 HOST=Black > > LABEL Vaio > KERNEL /boot/vmlinuz > APPEND ro initrd=/boot/initramfs console=ttyS0,38400 console=tty0 > vga=0x305 HOST=Vaio > ------------------------------------------- > > With "PROMPT 0", it boots without problems. > &...

...xenmeister 2.6.18-5-xen-vserver-686 #1 SMP Wed Oct 3 04:36:02 UTC 2007 i686 GNU/Linux xenmeister:~# lspci | grep AVM 00:06.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH A1 ISDN [Fritz] (rev 02) xenmeister:~# cat /boot/grub/menu.lst | grep 00:06.0 # xenkopt=console=tty0 pciback.hide=(00:06.0) module /boot/vmlinuz-2.6.18-5-xen-vserver-686 root=/dev/md0 ro console=tty0 pciback.hide=(00:06.0) xenmeister:~# lsmod Module Size Used by xt_tcpudp 3904 4 xt_physdev 3792 8 iptable_filter 3872 1 ip_tables...

wanted to follow up on that part (thanks about all comment suggestion regarding virt-viewer and vcn, etc. I will test them as well but would prefer the 'console way' if possible On August 29, 2016 at 2:44 PM Martin Kletzander <mkletzan at redhat.com> wrote: > * When you are connected you don't see anything because the VM doesn't > have console properly set up,

Hi All, I am not able to boot Xen . My "/boot/grub/menu.lst" has this entry title Xen 3.3.2-rc5 / Debian GNU/Linux, kernel 2.6.18.8-xen root (hd0,0) kernel /boot/xen-3.3.2-rc5.gz module /boot/vmlinuz-2.6.18.8-xen root=/dev/sda1 ro console=tty0 module /boot/initrd.img-2.6.18.8-xen savedefault I am getting following error : ERROR WHILE BOOTING => ------------------------------ -------------------------------------------------------------------- Booting ''Xen 3.3.2-rc5 / Debian GNU/Linux, Kernel 2.6.18.8-xen''...

Hi All, I am not able to boot Xen . My "/boot/grub/menu.lst" has this entry title Xen 3.3.2-rc5 / Debian GNU/Linux, kernel 2.6.18.8-xen root (hd0,0) kernel /boot/xen-3.3.2-rc5.gz module /boot/vmlinuz-2.6.18.8-xen root=/dev/sda1 ro console=tty0 module /boot/initrd.img-2.6.18.8-xen savedefault I am getting following error : ERROR WHILE BOOTING => ------------------------------ -------------------------------------------------------------------- Booting ''Xen 3.3.2-rc5 / Debian GNU/Linux, Kernel 2.6.18.8-xen''...

Hi All, I am not able to boot Xen . My "/boot/grub/menu.lst" has this entry title Xen 3.3.2-rc5 / Debian GNU/Linux, kernel 2.6.18.8-xen root (hd0,0) kernel /boot/xen-3.3.2-rc5.gz module /boot/vmlinuz-2.6.18.8-xen root=/dev/sda1 ro console=tty0 module /boot/initrd.img-2.6.18.8-xen savedefault I am getting following error : ERROR WHILE BOOTING => ------------------------------ -------------------------------------------------------------------- Booting ''Xen 3.3.2-rc5 / Debian GNU/Linux, Kernel 2.6.18.8-xen''...

...to use the same iso to make a guest, but I do not want the gui on the server. I tried mounting, umounting it..I tried using dd to bring the bootable iso from the cdrom. the issue I think, but not sure, is the use of the console directive with virt-install. It appears --extra-args="console=tty0 console=ttyS0,115200" works fine when using --location, but not --cdrom Unfortunately '--location" will ignore the path provided for the local iso and want to go to a url, an nfs, a virtual hard drive or cdrom....thus not able to install from local media. However, the text install...

...od." ( http://www.syslinux.org/wiki/index.php/Mboot.c32) .... I'm not sure what they mean by "existing kernel/append method" though... I 've already tried stuff such as: 1) LABEL Xen Hypervisor MENU DEFAULT KERNEL ../xen-4.3.2.gz APPEND root=/dev/sda1 console=tty0 console=ttyS0,9600 rw loglevel=5 and 2) LABEL Xen Hypervisor MENU DEFAULT KERNEL ../vmlinuz-2.6.31.8 APPEND ../xen-4.3.2.gz root=/dev/sda1 console=tty0 console=ttyS0,9600 rw loglevel=5 But none of this have worked. Hope you guys can help me figure out what I'm doing wrong. T...

...te that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that # all kernel and initrd paths are relative to /boot/, eg. # root (hd0,0) # kernel /vmlinuz-version ro root=/dev/hda3 console=tty0 console=ttyS0,9600 # initrd /initrd-version.img boot=/dev/hda1 default=0 timeout=5 splashimage=(hd0,0)/grub/splash.xpm.gz hiddenmenu # title Scientific Linux (2.6.9-11.EL) root (hd0,0) kernel /vmlinuz-2.6.9-11.EL ro root=LABEL=/ rhgb quiet cons...

...out an initrd. I'm following this guideline http://www.syslinux.org/wiki/index.php/Xen for my syslinux configuration file, but without including an initrd. So it looks like this: LABEL xen MENU DEFAULT KERNEL mboot.c32 APPEND xen-4.3.2.gz dom0_mem=262144 --- ../vmlinuz-2.6.31.8 console=tty0 root=/dev/sda1 ro What happens is that it tries to load but keeps looping back to the bootloader menu. I think it might be expecting the initrd image. Anybody knows how to set the configuration file for xen so it doesn't need an initrd?? Thank You! Cheers, Ingrid

...0,6)         kernel /vmlinuz-2.6.30-rc6-tip ro root=/dev/mapper/VolGroup-lv_root rhgb quiet         initrd /initrd-2.6.30-rc6-tip.img title Xen 3.4 / Fedora kernel 2.6.30-rc6-tip         kernel /boot/xen-3.4.gz         module /boot/vmlinuz-2.6.30-rc6-tip root=/dev/mapper/VolGroup-lv_root ro console=tty0         module /boot/initrd-2.6.30-rc6-tip.img [root@localhost boot]# df -h Filesystem            Size  Used Avail Use% Mounted on /dev/mapper/VolGroup-lv_root                        77G   11G   62G  15% / /dev/sda7             194M   37M  148M  20% /boot tmpfs                1002M  672K 1002M  ...

Dear List maybe a simple question. We have a pxelinx server in our network which only sent the output on a serial console. Now we want both output on VGA and serial console. I think pxelinux redirect the output default on VGA. So I think the only changes I have made is to add "tty0" into the "label" section in the "default" file. Is this correct? Mit freundlichem Gru? / Best regards Oliver Klein

...date_dev /liveos # install oVirt Node image for local boot if [ -e "$live/syslinux" ]; then syslinux=syslinux @@ -146,7 +147,7 @@ set -e\ version=$(rpm -q --qf '%{version}' ovirt-node) release=$(rpm -q --qf '%{release}' ovirt-node) # reorder tty0 to allow both serial and phys console after installation - bootparams="ro root=/dev/HostVG/Root roottypefs=ext3 console=tty0 \ + bootparams="ro root=LABEL=Root roottypefs=ext3 console=tty0 \ $(echo $bootparams | sed s/console=tty0//g)" cat > /boot/grub/...

...6_32p hvm-3.0-x86_64 xen_scheduler : credit xen_pagesize : 4096 platform_params : virt_start=0xffff800000000000 xen_changeset : Thu Apr 23 15:06:13 2015 +0100 git:c5ec076-dirty xen_commandline : dom0_mem=1024M,max:1024M loglvl=all guest_loglvl=all console=tty0 console=com2 com2=57600 cc_compiler : gcc (GCC) 4.4.7 20120313 (Red Hat 4.4.7-16) cc_compile_by : mockbuild cc_compile_domain : centos.org cc_compile_date : Tue Sep 8 15:31:24 UTC 2015 xend_config_format : 4 *grub.conf:* jeremym]# cat /etc/grub.conf # grub.co...

CentOS 7 How do I print something on the text-mode console right after the OS has finished booting? I've a virtual instance and I need to know its IP address after it has finished booting up, to know where to ssh into it. I've tried adding "ip -4 addr > /dev/tty0" to rc.local, but that obviously doesn't work, because the login prompt overwrites everything I do. -- Florin Andrei http://florin.myip.org/

Hi, I am having the following setup: the kernel displays its messages to vga and to ttyS0. This works without xen. When I reboot my system with xen with the following options to xen and vmlinuz, xen.gz com1=115200,8n1 console=com1,vga vmlinuz console=ttyS0,115200 console=tty0 the system hangs up while booting the dom0 kernel. Has anyone such a setup working? The thin is, I want a console on VGA and one on a serial line. And both should display all messages. Johnny _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com ht...