Displaying 20 results from an estimated 21 matches for "te_clock".
Did you mean:
mm_clock
2007 Dec 02
1
setting up two asterisk server as ss7 back to back.
...WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 15
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = MASTER
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
LBO = 120OH
TE_SIG_MODE = CCS
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 0
[w1g1]
ACTIVE_CH = ALL
TDMV_EC...
2007 Jan 03
0
Sangoma A102 w/ EC module gets intermittent echo/audio artifacts
I think you are absolutely right. The audio I heard earlier sounds exactly
like a timing issue. So:
wanpipe1.conf:
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
wanpipe2.conf:
TE_CLOCK = MASTER
TE_REF_CLOCK = 1
zaptel.conf:
span=1,1,0,esf,b8zs
span=2,0,0,esf,b8zs
I'm going to make this change and reload at lunchtime, I'll document it and
post it to the list if it works. thanks for the good eye....
2007 Jan 04
0
Sangoma A102 w/ EC module gets intermittent echo/audio artifacts <--followup and resolution
Followup on this issue, it appears that using a single PRI's clock as the
master clock avoids clock drift between the PRI's and we get no more
artifacts. So, :
wanpipe1.conf:
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
wanpipe2.conf:
TE_CLOCK = MASTER
TE_REF_CLOCK = 1
zaptel.conf:
span=1,1,0,esf,b8zs
span=2,0,0,esf,b8zs
-----Original Message-----
From: Michael L. Young [mailto:myoung@acsacc.com]
Sent: Wednesday, January 03, 2007 9:37 AM
To: 'Asterisk Users...
2008 Oct 06
2
Conneting Asterisk to Swyx pri
...= WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 1
PCIBUS = 16
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = CRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_SIG_MODE = CCS
TE_HIGHIMPEDANCE = NO
LBO = 120OH
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 16
TDMV_HW_DTMF = NO
[w1g1]
ACTIVE_...
2009 Apr 17
1
Sangoma A104d and Adtran 850 problems
...c/dahdi/system.conf that says what is connected to the port,
correct?
Here is /etc/wanpipe/wanpipe7.conf:
[wanpipe7]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 9
FE_MEDIA = T1
FE_LCODE = B8ZS
FE_FRAME = ESF
FE_LINE = 3
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
LBO = 0DB
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 7
TDMV_DCHAN = 0
TDMV_HW_DTMF = YES
[w7g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = YE...
2007 Jan 03
2
Sangoma A102 w/ EC module gets intermittent echo /audio artifacts
...s over 2.0
My conf files:
wanpipe1.conf:
[devices]
wanpipe1 = WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 1
FE_MEDIA = T1
FE_LCODE = B8ZS
FE_FRAME = ESF
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
LBO = 0DB
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 0
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = YES
wanpipe2.conf:
[devices]
wanpipe2 = WAN_AFT_TE1, Comment
[interfa...
2007 Jul 26
1
Asterisk 1.2.23 and Sangoma a102 no incoming calldetected
...= WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 1
PCIBUS = 4
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_SIG_MODE = CCS
TE_HIGHIMPEDANCE = NO
LBO = 120OH
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 16
[w1g1]
ACTIVE_CH = ALL
TDMV_E...
2005 May 15
0
Re: Asterisk-Users Digest, Vol 10, Issue 114
...================================================
[devices]
wanpipe1 = WAN_AFT, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = YES
PCISLOT = 1
PCIBUS = 1
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = CRC4
FE_LINE = 1
TE_CLOCK = NORMAL
ACTIVE_CH = ALL
TE_HIGHIMPEDANCE = NO
INTERFACE = V35
CLOCKING = EXTERNAL
BaudRate = 2048
MTU = 2048
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
[w1g1]
PROTOCOL = HDLC
HDLC_STREAMING = NO
ACTIVE_CH = ALL
IDLE_FLAG = 0x7E
MTU = 2048
MRU = 2048
TDMV_SPAN = 1
TDMV_ECHO_OFF = NO
MUL...
2007 Jul 26
1
Asterisk 1.2.23 and Sangoma a102 no incoming call detected
...= WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 1
PCIBUS = 4
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_SIG_MODE = CCS
TE_HIGHIMPEDANCE = NO
LBO = 120OH
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 16
[w1g1]
ACTIVE_CH = ALL
TDMV_E...
2006 Nov 16
1
Sangoma A101 gives 'no PRI configured on span 1' error
I upgraded from Tormenta2 to Sangoma A101. I followed the instructions, and
installation was successful. zttool, ztcfg, all show card is installed
properly. I copied the parameters from my old working zaptel.conf,
zapata.conf and zapata-auto.conf. Verified on Sangoma website that these
files are correct. Also configured wanpipe1.conf.
But doing all this didn't start the PRI channels. It says
2010 Apr 01
2
Problem with Sangoma A104 and euroisdn pri
...omment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 13
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_SIG_MODE = CCS
TE_HIGHIMPEDANCE = NO
LBO = 120OH
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 16
TDMV_HW_DTMF...
2006 Mar 11
1
FW: I need to set NO CRC4 on zaptel.conf?
...WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 13
PCIBUS = 6
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
LBO = 120OH
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 16
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HW...
2014 Aug 01
1
load testing and pattern testing sangoma A116 card
...= WAN_AFT_TE1, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 4
PCIBUS = 5
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_SIG_MODE = CCS
TE_HIGHIMPEDANCE = NO
TE_RX_SLEVEL = 430
LBO = 120OH
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN...
2005 May 27
0
Re: Asterisk-Users Digest, Vol 10, Issue 215
...================================================
[devices]
wanpipe1 = WAN_AFT, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = YES
PCISLOT = 2
PCIBUS = 1
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = CRC4
FE_LINE = 1
TE_CLOCK = NORMAL
ACTIVE_CH = ALL
TE_HIGHIMPEDANCE = YES
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 0
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
I start wanrouter, the card connected success, monitor on E10 exchange (ACATEL), the status of all channels are LI...
2006 Dec 20
5
Sangoma A101 with Unicall
...pe1 = WAN_AFT, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 2
PCIBUS = 1
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
TE_HIGHIMPEDANCE = NO
LBO = 120OH
TE_SIG_MODE = CAS
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 16
[w1g1]
ACTIVE_CH = ALL
TDMV_E...
2005 Sep 27
4
BAD echo problems with Sangoma and Telstra
...ipe1 = WAN_AFT, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 0
PCIBUS = 1
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = CRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
ACTIVE_CH = ALL
TE_HIGHIMPEDANCE = NO
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 0
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = YES
##EOF
2007 Apr 05
2
PRI DCHAN Errors
Hey all,
I had a user complaining of calls which were dropping mid-conversation.
I looked into the time of one of the calls, and saw the following:
Apr 4 12:13:03 WARNING[6670] chan_zap.c: No D-channels available!
Using Primary channel 28 as D-channel anyway!
Apr 4 12:13:05 WARNING[6660] channel.c: Avoided initial deadlock for
'0x82b8430', 10 retries!
Apr 4 12:13:05 WARNING[6660]
2006 Apr 07
1
Inbound PRI calls drop after 5 seconds using Sangoma A101
...pipe1 = WAN_AFT, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 5
PCIBUS = 2
FE_MEDIA = T1
FE_LCODE = B8ZS
FE_FRAME = ESF
FE_LINE = 1
TE_CLOCK = NORMAL
ACTIVE_CH = ALL
TE_HIGHIMPEDANCE = NO
LBO = 0DB
INTERFACE = V35
CLOCKING = EXTERNAL
BaudRate = 0
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
[w1g1]
PROTOCOL = HDLC
HDLC_STREAMING = YE...
2005 Sep 05
0
Re: Asterisk-Users Digest, Vol 14, Issue 22
...===============================================
[devices]
wanpipe1 = WAN_AFT, Comment
[interfaces]
w1g1 = wanpipe1, , TDM_VOICE, Comment
[wanpipe1]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = YES
PCISLOT = 2
PCIBUS = 1
FE_MEDIA = E1
FE_LCODE = HDB3
FE_FRAME = NCRC4
FE_LINE = 1
TE_CLOCK = NORMAL
TE_REF_CLOCK = 0
ACTIVE_CH = ALL
TE_HIGHIMPEDANCE = YES
FE_TXTRISTATE = NO
MTU = 2100
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 1
TDMV_DCHAN = 0
[w1g1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
and my setting /etc/zaptel.conf
#
# Zaptel Configuration File
#
# This file i...
2006 Apr 03
4
R2 protocol error
Hi,
I have three R2 installation on different carriers, all shows the same inconsistency at varying
degree. But, on most test calls we made, it reaches T3. The worst part of these, the carrier
claims that it's my R2 box that is not responding in time. Please, check the attached file and
take note of the timestamp, you'll find that in some call, it already contradict what the carrier