search for: tdmv_echo_off

...C4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 ACTIVE_CH = ALL TE_HIGHIMPEDANCE = NO FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 0 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = YES ##EOF

...E_CLOCK = MASTER TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 120OH TE_SIG_MODE = CCS FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 0 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES # zaptel.conf loadzone=uk defaultzone=uk span=1,1,0,ccs,hdb3 bchan=1-31 ### ss7.conf [linkset-ennie] enabled => yes use_connect => yes enable_st => no hunting_policy => odd_lru subservice => auto context = default [link-l1] linkset => ennie chan...

...L TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 TDMV_HW_DTMF = NO [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES wanpipe3 and 4: [devices] wanpipe3 = WAN_AFT_TE1, Comment [interfaces] w3g1 = wanpipe3, , TDM_VOICE, Comment [wanpipe3] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 1 PCIBUS = 16 FE_MEDIA = E1...

...ME = ESF FE_LINE = 3 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 0DB FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 7 TDMV_DCHAN = 0 TDMV_HW_DTMF = YES [w7g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES Here is /etc/dahdi/system.conf loadzone=us defaultzone=us #Sangoma A104 port 3 [slot:4 bus:9 span:7] <wanpipe7> span=7,0,0,esf,b8zs fxols=145-164 fxsls=165-168 Here is /etc/asterisk/chan_dahdi.conf: [trunkgroups] [channels] context=default usecallerid=yes hi...

...SLOT = NO PCISLOT = 4 PCIBUS = 1 FE_MEDIA = T1 FE_LCODE = B8ZS FE_FRAME = ESF FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 0DB FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 0 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES wanpipe2.conf: [devices] wanpipe2 = WAN_AFT_TE1, Comment [interfaces] w2g1 = wanpipe2, , TDM_VOICE, Comment [wanpipe2] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 4 PCIBUS = 1 FE_MEDIA = T1 FE_LCODE = B8ZS FE_FRAME = ESF FE_LINE = 2 TE_CLO...

..._CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES thanks for your help. -- ------------------------------------------------------------ Erick Perez ------------------------------------------------------------ _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digi...

...FE_LINE = 1 TE_CLOCK = NORMAL ACTIVE_CH = ALL TE_HIGHIMPEDANCE = NO INTERFACE = V35 CLOCKING = EXTERNAL BaudRate = 2048 MTU = 2048 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO [w1g1] PROTOCOL = HDLC HDLC_STREAMING = NO ACTIVE_CH = ALL IDLE_FLAG = 0x7E MTU = 2048 MRU = 2048 TDMV_SPAN = 1 TDMV_ECHO_OFF = NO MULTICAST = NO TRUE_ENCODING_TYPE = NO when i start sangoma card (wanrouter start). the system run overload (CPU = 100) and i unplug cable, i view logfile, i see: DMA descriptor length error ... i ask sangoma support, but don't received any supoported. please send to me good confi...

..._CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES thanks for your help. -- ------------------------------------------------------------ Erick Perez ------------------------------------------------------------

I upgraded from Tormenta2 to Sangoma A101. I followed the instructions, and installation was successful. zttool, ztcfg, all show card is installed properly. I copied the parameters from my old working zaptel.conf, zapata.conf and zapata-auto.conf. Verified on Sangoma website that these files are correct. Also configured wanpipe1.conf. But doing all this didn't start the PRI channels. It says

...= A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 6 PCIBUS = 1 FE_MEDIA = FXO/FXS TDMV_LAW = MULAW TDMV_OPERMODE = FCC MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = NO

...FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = YES goksie

...U = A CommPort = PRI AUTO_PCISLOT = YES PCISLOT = 2 PCIBUS = 1 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = CRC4 FE_LINE = 1 TE_CLOCK = NORMAL ACTIVE_CH = ALL TE_HIGHIMPEDANCE = YES MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 0 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO I start wanrouter, the card connected success, monitor on E10 exchange (ACATEL), the status of all channels are LIBR. when i dial to asterisk, error show as belows *CLI> Warning, flexibel rate not heavily tested! Rx CAS bits 0x9 [ 10000/ 0/ 0] Line unblocked -- R2 Channel 4 u...

..._CLOCK = NORMAL TE_REF_CLOCK = 0 TE_HIGHIMPEDANCE = NO LBO = 120OH TE_SIG_MODE = CAS FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO TDMV_HWEC = NO Basically I only get channels 1 to 15 active in Asterisk. I am using wanpipe-2.3.4-3 with Zaptel 1.2.12 for this configuration and Asterisk 1.2.14. -- Telecomunicaciones Abiertas de Mexico S.A. de C.V. Carlos Ch?vez Prats Director de Tecnolog?a +52-55-91169161 ext...

Hi, got a Sangoma A200 with a bunch of extension cards and having real problems getting it to deal with a normal single BT line Symptoms are that incoming calls are fine. Outgoing calls ring the far end, BUT asterisk never sees that the call is answered (ie no message in the logs files saying so), as a result the remove end can hear the PBX side talking, but there is no audio back from the

...LOCKING = EXTERNAL BaudRate = 0 MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO [w1g1] PROTOCOL = HDLC HDLC_STREAMING = YES ACTIVE_CH = ALL IDLE_FLAG = 0x7E MTU = 1500 MRU = 1500 TDMV_SPAN = 1 TDMV_ECHO_OFF = NO MULTICAST = NO TRUE_ENCODING_TYPE = NO asterisk1*CLI> pri show span 1 asterisk1*CLI> Primary D-channel: 24 Status: Provisioned, Up, Active Switchtype: National ISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T2...

...YES PCISLOT = 2 PCIBUS = 1 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = NCRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 ACTIVE_CH = ALL TE_HIGHIMPEDANCE = YES FE_TXTRISTATE = NO MTU = 2100 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 0 [w1g1] ACTIVE_CH = ALL TDMV_ECHO_OFF = NO and my setting /etc/zaptel.conf # # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # # First come the span definitions, in the format # span=<span num>,<timing>,<line build out (LBO)>,<framing>,<coding>[,yellow] # # The t...

[This email is either empty or too large to be displayed at this time]