That implies that the 2850 has a standard molex connector anywhere inside of
it, which is not the case.
Regards,
- Brad
-----Original Message-----
From: asterisk-users-bounces@lists.digium.com
[mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Mark Davies
Sent: Wednesday, March 29, 2006 6:34 AM
To: radamson@routers.com; Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: Re: [Asterisk-Users] Dell 2850 w/TDM2400?
Or just pop down to your local computer store and get a molex splitter.
Regards,
Mark.
Rich Adamson wrote:>
> The fxs ports have to generate ringing voltage (about 90 vac) and they
> use the 12 volt power supply to do that. When an fxs port is not
> ringing, it consumes about the same amount of power as an fxo port; not
> much.
>
> The 12 volt power is not available via the pci connector, so the TDM
> cards use one of the disk drive connectors commonly found in most
> chassis. The majority of 1U and 2U chassis do not have extra disk drive
> power connectors wired in them.
>
> If you're handy with electronics and a soldier gun, you can find and
> rig
> the 12 volt power required for the cards in those chassis.
>
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
The contents of this e-mail are intended for the named addressee only. It
contains information that may be confidential. Unless you are the named
addressee or an authorized designee, you may not copy or use it, or disclose
it to anyone else. If you received it in error please notify us immediately
and then destroy it.