Hi, We added more g729 licenses today that we bought from digium on Friday. Since we had previously installed their licenses and had them running we just ran the register command along with the new key that was given to us. After we restarted asterisk NONE of the g729's worked even though if we do a show g729 it shows the new correct total licenses. In the licenses folder we see both license files. What happens is that if we terminate calls to carriers who accept only the g729 codec we get a 503 service unavailable. I would appreciate any and all feedback so get the codec working before Monday. Thanks. -Stu
programming dept wrote:> What happens is that if we terminate calls to carriers who accept > only the g729 codec we get a 503 service unavailable.are you sure that your carrier will accept g.729? Sometimes they don't accept under iax2 and do accept under sip... check your debug for more information about this specific error also - maybe it is something not related to your g.729 codec/license codecs are allowed into your sip.conf or iax.conf? [general] disallow=all allow=g729 or under your peer/friend config: [blahblahblah] type=... disallow=all allow=g729
King Ho
2006-Nov-04 21:10 UTC
[asterisk-users] Need help choosing cards that support detail Hangup Cause
Hi, I am trying to decide on which card to buy for a project where we need to be able to log the reasons for failed calls. For example, if the number dialed is not valid anymore, like the client has changed phone number and decommissioned the old number, we need Asterisk to return a cause of AST_CAUSE_UNALLOCATED. Do we need to go T1/E1 (like the TE110P), BRI (like the B410P) or will analog cards like the TDM2400 with FXO ports be able to do it? Thanks in advance. Best Regards, King
C F
2006-Nov-04 21:50 UTC
[asterisk-users] Need help choosing cards that support detail Hangup Cause
Analog has no way of doing that, unless you listen to the recorded message and your provider plays the right message for the right cause. A PRI will give you the cause. On 11/4/06, King Ho <kingho@completesolution.com.hk> wrote:> Hi, > > I am trying to decide on which card to buy for a project where we need to be > able to log the reasons for failed calls. > > For example, if the number dialed is not valid anymore, like the client has > changed phone number and decommissioned the old number, we need Asterisk to > return a cause of AST_CAUSE_UNALLOCATED. > > Do we need to go T1/E1 (like the TE110P), BRI (like the B410P) or will > analog cards like the TDM2400 with FXO ports be able to do it? > > Thanks in advance. > > Best Regards, > > > > King > > > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
King Ho
2006-Nov-04 22:13 UTC
回覆: [asterisk-users] Need help choosing cards that support detailHangup Cause
How about T1? or BRI? I think BRI is just a single channel version of PRI, right? Thanks. King -----????----- ???: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] ?? C F ????: Sunday, 5 November, 2006 12:51 ???: Asterisk Users Mailing List - Non-Commercial Discussion ??: Re: [asterisk-users] Need help choosing cards that support detailHangup Cause Analog has no way of doing that, unless you listen to the recorded message and your provider plays the right message for the right cause. A PRI will give you the cause. On 11/4/06, King Ho <kingho@completesolution.com.hk> wrote:> Hi, > > I am trying to decide on which card to buy for a project where we need tobe> able to log the reasons for failed calls. > > For example, if the number dialed is not valid anymore, like the clienthas> changed phone number and decommissioned the old number, we need Asteriskto> return a cause of AST_CAUSE_UNALLOCATED. > > Do we need to go T1/E1 (like the TE110P), BRI (like the B410P) or will > analog cards like the TDM2400 with FXO ports be able to do it? > > Thanks in advance. > > Best Regards, > > > > King > > > > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >_______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Possibly Parallel Threads
- TDM2400 card FXS problems
- B410P - BRI NT 100 Ohm terminator
- TDM2400 Hardware Echo Cancel
- DAHDI and B410P (BRI)
- [SPAM] - Re: [SPAM] - Re: [SPAM] - Dahdi, b410p and looping from 1 port to another - Email found in subject -Email found in subject - Email found in subject