search for: ta750s

I recently set up Asterisk with an Adtran TA750. All is well except the phones do not show the MWI. I have configured zapata.conf properly, as all phones will receive a stutter dial tone if there is a message waiting in it's assigned mailbox. Does anybody know how I might fix this problem? Thank you for your time __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free,

All, I need help. I have an (actually 2) Adtran TA750's with 8 FXO ports. I get a terrible buzz on every FXO port. If I unplug the Adtran and put an analog phone on each incoming line, I have no buzz. I also have 2 Carrier Access Access Bank I's with 12 FXO ports. When I plug the same analog lines into either one of those, no noise or buzz whatsoever. I went so far as to move the TA750

...gium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Rich Adamson Sent: Thursday, April 22, 2004 6:03 PM To: asterisk-users@lists.digium.com Cc: mike@introspect.com Subject: [SPAM] - Re: [Asterisk-Users] Adtran TA750 Noise - Email found in subject > I have an (actually 2) Adtran TA750s with 8 FXO ports. I get a terrible buzz on every FXO port. If I unplug the Adtran and put an analog phone > on each incoming line, I have no buzz. > > I also have 2 Carrier Access Access Bank Is with 12 FXO ports. When I plug the same analog lines into either one of those, no noise or b...

I believe it is not fiber, but I am not sure. I am going to take one of them home tonight and hook it to my POTS line there, which for sure is not fiber. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Michael Welter Sent:

Hello. I have been going thru the wiki and asterisk related sites and have not been able to find any documentation about how to configure an Adtran TA750 channel bank. The remote disconnect supervision doesn't seem to be working, when the remote caller hangs up asterisk takes up to 30-45 seconds to hangup the call. Can somebody help? Thank's

> I read your excellent post on the subject. I too am hearing the 60 Hz > hum on the FXO ports of my TA750. One Interesting thing is that it > goes away if there's an analog phone on the same POTS line, and you go > off-hook on it. I guess the analog phone has the repeat coils built > into it, and they balance the line for the FXO port. That's exactly correct; the

(to mods: sorry for any extra work I've put you through. Posting from my work account, as proper) Hello all, I'm back. I've got that lucky feeling that this will all work out very soon, and I hope that that is true. The issue: In my * server I have a t100P, connected with a T1 crossover cable to an Adtran TA750 with 2 FXO cards. After I do 'modprobe wct1xxp;ztcfg' the alarm

Hello all, I've got a T100P connected to an Adtran TA750 with a T1 crossover... This connects to a patch panel with phone ports. The Adtran is fully populated with FXS cards. All I get on any phone port is a fast clicking noise... No dialtone. Asterisk 'sees' the card, (the channels show up in /proc/zaptel). Incoming calls are routed to the zap/x channel, but no ring. I'm

Hello, I new to this, but with the help of mailing lists archives and IRC I am able to build my PBX. Thanks to all who had help me to reach till here. I am stuck at a point where I can't find the solution on mailing lists or even on IRC. I have individual 4 DID (Direct Inward Line) coming from Telco and terminating into TA 750 to FXS card. Many of them told that Phone instrument terminates

In my * server I have a T100P, connected with a T1 crossover cable to an Adtran TA750 with 2 FXO cards. After I do 'modprobe wct1xxp;ztcfg' the alarm on the card starts blinking red. Running zttool confirmed that yes, it is a red alarm. I've read a few previous posts on this type of setup and I'm not too much closer. What should I be checking next? A different cable? The

Hello, So all the pieces are finally here, and I'm ready to play. I remember reading on this list that the connection Channel Bank <-> T100P requires a "reverse cable." Is this a regular Ethernet reverse cable (i.e., only a couple of pairs reversed?) Please help me before I blow something up! Saludos, Jose.

Folks, I recently obtained a Western Electric multi-line phone and am seeking help with getting this beast working with *. The interesting stuff in my * implementation consists of a T100P card, a TDM400P card, and an Adtran TA750 channel bank with three quad-port FXS modules and a quad-port FXO. The TA750 is wired to a 24-port Cat 5 patch panel via a 25-pair Amp cable. The phone is a model

All, Thanks for taking time to read. I am wanting someone to tell me that I have a clue here and that the following proposed setup would (possibly) work. Currently existing are 4 pots lines with qty. 10 AT&T 954/854 phones. Would like to convert to asterisk and at the same time do a mild feature upgrade. Proposing to get: PIII 800MHz or better >=256MB RAM

We currently have a 15-phone system using Asterisk, a combination of analog phones/Grandstream HandyTone-286 and Grandstream BT101s, and 4 X100Ps connected to analog lines. The system works well except for the occasional echo problem. I have all the echo parameters configured, removed all the extra incoming analog lines except to the PBX, etc. following all the advice on the wiki and on the

I get seg. fault with my * box. at the crash time i had about 35 Bridged Channel. i have: - dual xeon box (3.2Ghz) - 2Gb of memory - E7501 chipset motherboard. - U320 scsi disks - intel Gb ethernet device. - i only use sip for clients (no fxs in box) - TE405P for fxo (with 4 atran TA750). - ulaw is used as codec and echo cancellationo is enabled. but the core dump file has nothing to show with

Hello, I need help in creating a simple PSTN Gateway. This is the scenario: -I have one client sending me VoIP traffic (they don't have asterisk, so IAX is out of the picture for me) and I need to validate that traffic (only accept calls coming from his IP). After that I would terminate the calls to the PSTN network and keep logs for billing purposes. -I have a TE405P board and

Can anyone share any advice / documentation on how to configure a Tellabs 2572 T1 echo canceller? I connected one between a T100P and an Adtran TA750 FXO/FXS channelbank, but when echo cancellation is active I get a LOT of snap-crackle-pop (and other problems) on the line. The 2572 has a bunch of configuration options and they're impossible to guess without documentation, which I cannot find

I've tried this before, with no luck. I've got to try again this evening, and I'm looking for some help. Here's my configuration -- pretty simple, really. Asterisk box -> T100P -> TA750(20FXS/4FXO) -> phones and outgoing lines I have an analog modem (Ok, it's a TIVO) that I need to be able to dial out. Right now, I have the modem connected directly to an outgoing

Rob at draughon.org writes > I recently obtained a Western Electric multi-line phone and am >seeking help with getting this beast working with *. > > The interesting stuff in my * implementation consists of a T100P >card, a TDM400P card, and an Adtran TA750 channel bank with three quad-port >FXS modules and a quad-port FXO. The TA750 is wired to a 24-port Cat 5 patch >panel

Hello, I have been researching Echo Can's for a while now, and wanted to post this out to the list to solicit feedback (and if my assumptions are correct, hopefully help others out)... If anyone out there knows anything about wiring up an Echo Can, and my outline below is incorrect, please let the me/list know.. I have posted the Documents I received from Tellabs at: