Hello, So all the pieces are finally here, and I'm ready to play. I remember reading on this list that the connection Channel Bank <-> T100P requires a "reverse cable." Is this a regular Ethernet reverse cable (i.e., only a couple of pairs reversed?) Please help me before I blow something up! Saludos, Jose.
On Thu, 2003-10-16 at 11:03, Jose Quinteiro wrote:> So all the pieces are finally here, and I'm ready to play. I remember > reading on this list that the connection Channel Bank <-> T100P requires > a "reverse cable." Is this a regular Ethernet reverse cable (i.e., only > a couple of pairs reversed?) Please help me before I blow something up!Don't use an "ethernet crossover" cable... You need at T1 crossover cable. Please check out http://jaredsmith.net/misc/cables/ (one end should be "straight through" and the other end "T1 Crossover"). Jared Smith
You need a T1 crossover cable. You can find a pin diagram here: http://www.gcom.com/home/support/t1crossover.html --- Jose Quinteiro <asterisk@quinteiro.org> wrote:> Hello, > > So all the pieces are finally here, and I'm ready to > play. I remember > reading on this list that the connection Channel > Bank <-> T100P requires > a "reverse cable." Is this a regular Ethernet > reverse cable (i.e., only > a couple of pairs reversed?) Please help me before I > blow something up! > > Saludos, > Jose. > > _______________________________________________ > Asterisk-Users mailing list > Asterisk-Users@lists.digium.com >http://lists.digium.com/mailman/listinfo/asterisk-users __________________________________ Do you Yahoo!? The New Yahoo! Shopping - with improved product search http://shopping.yahoo.com
Jose Quinteiro wrote:> Hello, > > So all the pieces are finally here, and I'm ready to play. I remember > reading on this list that the connection Channel Bank <-> T100P requires > a "reverse cable." Is this a regular Ethernet reverse cable (i.e., only > a couple of pairs reversed?) Please help me before I blow something up! > > Saludos, > Jose.Here's a link to Adtran's site w/discrip for pin outs for loopback adapters and T1 crossover. http://www.adtran.com/adtranpx/Doc/0/BIAU1PH6DJBH39S2038BE81ID8/CU-94a6a9d76bfc11d78ff20c045003.html Here's a site that sells premade T1 cables by the foot. T1 cables should be 22awg solid, and each pair individually shielded. They also include shielded RJ connectors on there cables as well. $16.00 + .70 per foot, good cables. http://www.stonewallcable.com/product.asp?dept%5Fid=134&pf%5Fid=SC%2D9598%2DX+++++++++++