Displaying 20 results from an estimated 223 matches for "rxwink".
2006 Oct 13
3
Switchtype,Signalling,rxwink warnings
When I reload the asterisk I get the following warnings:
Oct 13 08:29:17 WARNING[10170]: chan_zap.c:10874 setup_zap: Ignoring
switchtype
Oct 13 08:29:17 WARNING[10170]: chan_zap.c:10874 setup_zap: Ignoring
signalling
Oct 13 08:29:17 WARNING[10170]: chan_zap.c:10874 setup_zap: Ignoring rxwink
Everything works fine as far as I know, I can dial and complete calls.
So why am I getting this warning. Is there anyway to fix this?
Thanks,
Remi
2007 Jul 22
1
Problem X100P - clone asterisk 1.4.8 no hangup
...le reload' instead.
-- Reloading module 'chan_zap.so' (Zapata Telephony)
== Parsing '/etc/asterisk/zapata.conf': Found
[Jul 22 02:53:22] WARNING[2600]: chan_zap.c:11121 process_zap: Ignoring
switchtype
[Jul 22 02:53:22] WARNING[2600]: chan_zap.c:11121 process_zap: Ignoring
rxwink
[Jul 22 02:53:22] WARNING[2600]: chan_zap.c:11121 process_zap: Ignoring
signalling
[Jul 22 02:53:22] ERROR[2600]: chan_zap.c:10472 build_channels: Unable to
reconfigure channel '1,2'
[Jul 22 02:53:22] WARNING[2600]: chan_zap.c:11437 reload: Reload of
chan_zap.so is unsuccessful!
The confi...
2005 Feb 11
1
Asterisk won't answer incoming analog line
...phone asterisk does not even recognize the ring.
Below is (I think) the relevant config files. My question is: How do I make
asterisk recognize when the phone is ringing?
Thanks in advance
lane
;zaptel.conf
fxsks=4
fxoks=1
loadzone = us
defaultzone=us
;
;zapata.conf
[channels]
language=en
rxwink=300
usecallerid=yes
cidsignalling=bell
hidecallerid=no
callwaiting=yes
usecallingpres=yes
threewaycalling=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
immediate=no
signalling => fxo_ks
channel => 1
signalling =&...
2005 Jun 19
0
Zaptel and Zapata Conf's
...=73-96
# Span 5: WCTDM/0 "Wildcard TDM400P REV E/F Board 1"
fxoks=97
fxoks=98
# channel 3, WCTDM, inactive.
# channel 4, WCTDM, FXO
fxsks=99
And Current Zapata.conf:
; Span 1: TE4/0/1 "TE410P (PCI) Card 0 Span 1"
; This T1 is attached to in-house CUST 3 System
;
language=en
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=no
usecallingpres=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=800
rxgain=0.0
txgain=0.0
immediate=no
busydetect=no
busycount=15
callprogress=no
;relaxdtmf=yes
;callerid=asreceived
faxdetect=incoming
signalling =>em_w
group = 2
channel...
2004 Mar 31
0
Can't talk on Cisco VIP 30 using Chan Skinny
...ults. All help will be greatly appreciated.
Below is the error log and my skinny.conf
Thanks,
Dean
Error Log:
Mar 31 00:09:29 WARNING[1024]: Ignoring port for now
Mar 31 00:09:29 WARNING[10251]: Read error on sound device: Resource
temporarily unavailable
Mar 31 00:09:29 WARNING[1024]: Ignoring rxwink
Mar 31 00:16:48 WARNING[1024]: Ignoring port for now
Mar 31 00:16:48 WARNING[10251]: Read error on sound device: Resource
temporarily unavailable
Mar 31 00:16:48 WARNING[1024]: Ignoring rxwink
Mar 31 00:22:30 WARNING[16401]: No audio available on
Skinny/133@flex-6??
Console:
skinny_answer(Skinny...
2005 Feb 22
1
Astersik CVS HEAD + T1 e&m wink + IAX client doesnt detect call answered on Zap channel
...inconvenient - the calling party doesn't know
if call is placed or not.
my /etc/zaptel.conf
span=1,1,0,esf,b8zs
e&m=1-12
loadzone = us
defaultzone=us
my /etc/asterisk/zapata.conf
[trunkgroups]
spanmap => 1,1,1
[channels]
language=en
context=default
switchtype=national
signalling=em_w
rxwink=300
usecallerid=yes
cidsignalling=bell
cidstart=ring
hidecallerid=no
callwaiting=yes
restrictcid=no
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=yes
echotraining=600
rxgain=10.0
tx...
2004 Apr 27
2
T1 DID problem
...s
-- extensions.conf --
; Need an extension to pick up calls from the T1 that uses e&m wink
; This comes in as a 6 instead of 4 full digits
; then pass to the s extension
exten => 6,1,Wait(1)
exten => 6,2,Goto(incoming,s,1)
-- zapata.conf --
[channels]
context=incoming
signalling=em_w
; rxwink=600
echocancel=yes
echotraining=yes
group=1
immediate=no
channel => 1-8
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040428/62baed9a/attachment.htm
2008 Jun 10
4
Problems configuring a PRI...
...said that the switchtype is 5ess and the signaling
is pri_cpe. My entries into zaptel.conf are:
span=1,0,0,esf,b8zs
bchan=1-23
dchan=24
loadzone = us
defaultzone=us
channels=1-23
And my entries in zapata.conf are:
language=en
context=telco-incoming
switchtype=5ess
signalling=pri_cpe
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=no
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
immediate=no
group...
2004 Mar 29
2
Zap channels stuck in 'Rsrvd' state
...ngup (being read as a flash instead of a
hangup?). A 'soft hangup zap/27-1' will not do anything (though it makes
an attempt).
Does shortening the rxflash time sound like it may help this? (Does
anyone have a good explanation, or link to one, of the prewink, wink,
preflash, flash, start, rxwink, rxflash, debounce timing functions?)
Thanks, as always...
Steve
2003 May 20
3
Need help with zapata.conf
I'm having a problem defining my channels
Here is my zapata.conf
-----------------------------------------------------------------------------------------------------
; Zapata telephony interface
;
; Configuration file
[channels]
;
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=-100.0
txgain=-50.0
callgroup=1
pickupgroup=1
immedi...
2006 Jan 05
3
TE110p and pri_cpe signalling not recognized
.../etc/zaptel.conf
span=1,1,0,ccs,hdb3,crc4
loadzone = nl
loadzone=de
defaultzone=nl
bchan=1-5,7-15,17-31
dchan=16
/etc/asterisk/zapata.conf
[trunkgroups]
trunkgroup => 1,16
spanmap => 1,1
[channels]
language=en
context=default
switchtype=euroisdn
pridialplan=unknown
signalling=pri_cpe
;rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=5.0
txgain=1.0
echotraining=yes
group=1
callgroup=1
pickupgroup=1
immediate=no
channel =&...
2005 Feb 18
6
W&M Wink timings for Nortel
...gs for Nortel DID ports?
The default settings on Asterisk are:
; prewink: Pre-wink time (default 50ms)
; preflash: Pre-flash time (default 50ms)
; wink: Wink time (default 150ms)
; flash: Flash time (default 750ms)
; start: Start time (default 1500ms)
; rxwink: Receiver wink time (default 300ms)
; rxflash: Receiver flashtime (default 1250ms)
; debounce: Debounce timing (default 600ms)
2005 Aug 12
2
Possibly bad FXS module in TDM400P?
...annels configured.
Regardless of my configuration, it should show up in ztcfg, right?
Here's my:
****** zaptel.conf ********
loadzone = us
defaultzone = us
fxoks=1
fxsks=2
****** zapata.conf ********
[trunkgroups]
[channels]
language=en
context=default
switchtype=national
signalling=fxo_ks
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=no
usecallingpres=yes
callwaitingcallerid=no
threewaycalling=no
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
mailbox=2500
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0...
2003 Apr 09
6
Configuring for outbound calls with PRI on T100P
I run a SIP-only shop with a 23 channel PRI and single T100P.
Here are my configs:
/etc/zaptel.conf:
span=1,0,0,esf,b8zs
bchan=1-23
dchan=24
loadzone = us
defaultzone=us
/etc/asterisk/zapata.conf
[channels]
context=default
switchtype=dms100
signalling=pri_cpe
pridialplan=unknown
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=no
hidecallerid=no
callwaiting=no
callwaitingcallerid=yes
threewaycalling=yes
transfer=no
cancallforward=yes
callreturn=yes
echocancel=128
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
immediate=no
musiconhold=default
ch...
2007 Aug 01
3
TE120P in Canada
...y help would be greatly appreciated.
/etc/zaptel.conf
loadzone=us
defaultzone=us
span=1,1,0,ccs,hdb3,crc4
bchan=1-10
dchan=24
/etc/asterisk/Zapata.conf
[trunkgroups]
[channels]
language=us
context=sasktel
switchtype=national
signalling=pri_net ; I have also tried pri_cpe
rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
channel=>1-10
callgroup=1
p...
2007 Sep 15
2
Astribank and caller ID from PSTN
...ribank with 8 FXO unit and 8 pstn lines connected to the
astribank. When I receive calls on my ipphone I get always Unknown
callerid.
It's is possible to receive the callerid from the lines on the astribank
unit? This is my config:
[channels]
language=es
context=from-zaptel
signalling=fxs_ks
;rxwink=300
usecallerid=yes
callerid=asreceived
;cidsignalling=bell
;cidstart=ring
hidecallerid=no
callwaiting=yes
;usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
;callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
echotraini...
2005 Aug 04
2
Some echo?
...s.
zapata.conf attached below:
Note: The commented out gain of +2 on outgoing seems to make no
difference to the effect.
Has anyone got any ideas?
;
; Zapata telephony interface
;
; Configuration file
[trunkgroups]
group => 1,16
[channels]
spanmap => 1,1,1
language=en
context=from-pstn
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
echotraining=800
;txgain=2.0
txgain=0.0
rx...
2004 Oct 06
3
Re 2 x100p cards H E L P (I have no hair left)
...Language MusicOnHold
pseudo pstnin default
1 pstnin default
2 pstnin default
r2d2*CLI>
my /etc/asterisk/zapata.conf
[channels]
context=default
switchtype=national
signalling=fxs_ls
rxwink=300 ; Atlas seems to use long (250ms) winks
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=1.0
txgain=7.0
group=1
callgroup=1
pickupgroup=1
immedi...
2003 Apr 16
1
New TDM400P no dialtone
...ome
solutions?
[root@anistonetech zapata]# asterisk -f -d
DEBUG[1024]: File config.c, Line 653 (__ast_load): Parsing
/etc/asterisk/asterisk.conf
DEBUG[1024]: File config.c, Line 653 (__ast_load): Parsing
/etc/asterisk/logger.conf
WARNING[1024]: File chan_zap.c, Line 6441 (load_module): Ignoring rxwink
/var/spool/asterisk/outgoing
WARNING[1024]: File chan_iax2.c, Line 4958 (set_config): Ignoring port
for now
ioctl(ZT_LOADZONE) failed: Inappropriate ioctl for device
Failed to register zone 'United States / North America': No data
available
WARNING[8201]: File chan_zap.c, Line 4200 (handl...
2004 Jun 07
1
pseudo zap channel - how to get rid of it ?
...e:
exten => _BLAXXX,1,Dial(Zap/g1/${EXTEN})
Instead I need to use:
exten => _BLAXXX,1,Dial(Zap/1/${EXTEN})
Here is my zaptel.conf
--------------------------------
fxsks=1
loadzone = us
defaultzone=us
Here is my zapata.conf
-----------------------------------
[channels]
signalling=fxs_ks
rxwink=300 ; Ausecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
context=default
channel => 1