Hi everybody I hope that somebody can help me with the following .... I have 2 quadbri cards 2 - 1t0 cards 1 pabx alcatel 4200 I would like to connect my asterisk to the alcatel , I installed bristuff 0.3.0-1p , loaded the zaphfc driver in NT mode configured zaptel and zapata , it works great. then I removed the 1 t0 card, added the quadbri loaded qozap : insmod qozap.ko ports=15 ( 4 ports in NT ) adjusted the zaptel zapata, specified the right signalling, right context ran ztcfg -vv ( 12 channels configured ) started asterisk, I get layer1 down message on the 4 ports, leds remain red what ever I do in my conf , I am not able to get a reaction from the card ( I tried with my two quadbri, on 2 different pc's ) what can I check ? thanks jl -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060531/8976602e/attachment.htm
Try to do ztcfg -s before you run ztcfg -vv Henk _____ From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Jean-Louis curty Sent: woensdag 31 mei 2006 12:52 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: [Asterisk-Users] Need help with Junghanns Quadbri Hi everybody I hope that somebody can help me with the following .... I have 2 quadbri cards 2 - 1t0 cards 1 pabx alcatel 4200 I would like to connect my asterisk to the alcatel , I installed bristuff 0.3.0-1p , loaded the zaphfc driver in NT mode configured zaptel and zapata , it works great. then I removed the 1 t0 card, added the quadbri loaded qozap : insmod qozap.ko ports=15 ( 4 ports in NT ) adjusted the zaptel zapata, specified the right signalling, right context ran ztcfg -vv ( 12 channels configured ) started asterisk, I get layer1 down message on the 4 ports, leds remain red what ever I do in my conf , I am not able to get a reaction from the card ( I tried with my two quadbri, on 2 different pc's ) what can I check ? thanks jl -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060531/895ce8f2/attachment.htm
I think you'll need to set the jumpers on the card in order to specify the NT ports. Jean-Louis curty wrote:> Hi everybody > > I hope that somebody can help me with the following .... > > I have > 2 quadbri cards > 2 - 1t0 cards > 1 pabx alcatel 4200 > > I would like to connect my asterisk to the alcatel , > > I installed bristuff 0.3.0-1p , > loaded the zaphfc driver in NT mode > configured zaptel and zapata , it works great. > > > then I removed the 1 t0 card, > added the quadbri > loaded qozap : insmod qozap.ko ports=15 ( 4 ports in NT ) > > adjusted the zaptel zapata, specified the right signalling, right context > ran ztcfg -vv ( 12 channels configured ) > started asterisk, > I get layer1 down message on the 4 ports, > leds remain red > what ever I do in my conf , I am not able to get a reaction from the > card ( I tried with my two quadbri, on 2 different pc's ) > > > what can I check ? > thanks > jl > ------------------------------------------------------------------------ > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >
thanks to all of you, I fixed my problem by changing the cable ! jl 2006/7/4, stoffell <stoffell@gmail.com>:> > On 5/31/06, Jean-Louis curty <jlcurty@gmail.com> wrote: > > I does nothing special, > > no output, nor error, > > same.. .:-( > > you should at least get any output from ztcfg, but aside from that, > like Tommaso said, you must also set the correct jumpers. > > cheers > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >-------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060704/1ecc1b37/attachment.htm