search for: priindic

2014-02-06 11:09 GMT+01:00 giovanni.v <iax at keybits.org>: > Il 05/02/2014 8.42, Olivier ha scritto: > > channel then it depends upon what you have the priindication option >> set to. With >> priindication=outofband then a busy cause code is sent to the >> network and the call >> is hung up. With priindication=inband then a busy tone is sent >> after a possible >> PROGRESS message. >> >...

...plan=local usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=no cancallforward=no callreturn=yes echocancel=yes echocancelwhenbridged=yes echotraining=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no priindication=outofband group = 1 channel => 1-10 Regards, Adam Rybak

...eturn=yes echocancel=yes overlapdial=yes autofalltrought=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 ; Span 2: WPE1/1 "wanpipe2 card 1" HDB3/CCS/CRC4 RED group=1,12 context=from-internal switchtype = euroisdn ;overlapdial = outgoing priindication = inband signalling = pri_net channel => 32-46,48-62 context = default group = 63 Span 4: WPE1/3 "wanpipe4 card 3" HDB3/CCS/CRC4 group=4,14 context=outrt-001-PSTN_E1 switchtype=qsig signalling=pri_cpe ;facilityenable=yes ;callprogress=yes pridialplan=unknown prilocaldialplan=...

...ailable to answer at this time ------------- context [pri2] of Box A: exten => _X.,1,Dial(Zap/r1/${EXTEN}) exten => _X.,2,NoOp(PRI_CAUSE=${PRI_CAUSE} CAUSECODE=${CAUSECODE}) ------------- zapata.conf of Box A & B: [channels] switchtype=euroisdn pridialplan=local prilocaldialplan=local priindication=passthrough ;priindication=outofband ; both tested.. internationalprefix=00 nationalprefix=0 usecallingpres=yes hidecallerid=no busydetect=no ; not need on pri callprogress=no callwaitingcallerid=yes ; show callerid on callwaitingcalls echotraining=no echocancel=yes echocancelwhenbridged=no...

...WARNING[27273] chan_zap.c: Ignoring nationalprefix Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring localprefix Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring privateprefix Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring unknownprefix Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring priindication Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring facilityenable Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring signalling Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring signalling A lot of changes? DV

...Tried this with the Stable 1.0.6 connected to Panasonic D500 and it indeed hung up a call from panasonics EXT or CO line but it doesn't give a busy or concestion signal to a caller (no sound to caller). I presume this is a Panasonic issue :( . > > * set the configuration option "priindication=oob". This will make busy > and congestion send an isdn disconnect insteadof playing audio. > I belive that I have tried to set priindication=outofband and then tried with Congestion() in dialplan but it had a same effect as setting PRI_CAUSE + Hangup() . I'll try with t...

Hello, On a Asterisk 1.6.1 powered system, I've just discovered that using Busy() application in dialplan was no enough to send a Busy signal on incoming Dahdi channel. On this specific install, adding an Answer()) and a Playtone() statement in dialplan triggered sending of busy tone but I'm still surprised by my findings. Should I expect public switch to send a Busy tone to caller

...id not, But XO communications said they did. Before I call to complain, is there an setting to turn this on in asterisk? I want to make sure that I have my side covered before I call XO. My current zaptel.conf is: context=from-pstn switchtype=national pridialplan=unknown prilocaldialplan=unknown priindication = outofband signalling=pri_cpe usecallerid=yes hidecallerid=no usecallingpres=yes echocancel=yes echocancelwhenbridged=no group=0 callgroup=1 pickupgroup=1 accountcode=I musiconhold=default channel => 1-23 -- -- Steven http://www.glimasoutheast.org

I am seeing some curious behaviour with a 1.2.32 system, which I do not understand and so can't work out how to fix it. I have a PRI routed to context default. Here is the complete default context: [default] exten => _9X.,1,Dial(IAX2/m1peer/${EXTEN:1}) exten => _20XX,1,Dial(IAX2/sipeer/${EXTEN}) exten => _X.,1,Dial(IAX2/m1peer/${EXTEN}) exten =>

...============= Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) 1 channels to configure. Setting echocan for channel 1 to mg2 <<chan_dahdi.conf>> [trunkgroups] [channels] language=en resetinterval=3600 inbanddisconnect=yes priindication=outofband signalling=fxo_ks usecallerid=yes cidsignalling=bell cidstart=polarity usedistinctiveringdetection=yes callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhe...

...and config files zaptel.conf loadzone = it defaultzone = it span=1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 span=2,0,0,ccs,hdb3,crc4 bchan=32-46 dchan=47 bchan=48-62 zapata.conf [channels] switchtype = euroisdn ;line signalling=pri_cpe pridialplan=unknown switchtype=euroisdn priindication = outofband echocancel=no overlapdial=yes immediate=no nationalprefix= internationalprefix= resetinterval=300 context=pri1 group=1 channel => 1-15 channel => 17-31 ;pbx signalling=pri_net pridialplan=international switchtype=euroisdn priindication=outofband echocancel=no overlapdial=yes...

...r a 5ESS. Does anyone have an example configuration that they have used with a 5ESS switch? Below is the my configuration from Zapata.conf and a sample extension I've tried to use to connect a call with new caller ID information provided by my PBX. Any insight is most appreciated. [channels] priindication = outofband usecallerid=yes cidsignalling=bell hidecallerid=no callwaiting=no usecallingpres=yes callwaitingcallerid=no threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=n...

...'492389990' to 's' on channel 0/2, span 4 -- Executing Directory("Zap/11-1", "default") in new stack -- Playing 'dir-intro' (language 'fr') etc... My zapata.conf contains: [channels] language=fr musiconhold=default switchtype=euroisdn priindication=outofband callerid=asreceived busydetect=no callwaiting=yes callwaitingcallerid=yes pridialplan=unknown nationalprefix=0 internationalprefix=00 callgroup=1 pickupgroup=1 hidecallerid=no usecallerid=yes echocancel=yes context=default ;; for TE ports signalling=bri_cpe_ptmp group...

Hi I've got a few 8 port Junghanns BRI ISDN cards. Dialling in and out is working fine but the Telco's busy or invalid number indications are not being passed through to the user. I have priindication=passthrough in my zapata.conf but this doesn't seem to help. I'm using Asterisk 1.2.13, Zaptel 1.2.10 and Bristuff 0.3.0-PRE-1v. This is happening on three different boxes that I've setup with the same ISDN cards at three different sites. If the number is busy or invalid the Asteri...

...ading module chan_zap.so failed! Ideas? I'm sure it's something simple I've missed. :) Config fragments follow: ==/etc/zaptel.conf== span=1,0,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone=nz defaultzone=nz ==end== ==/etc/asterisk/zapata.conf== context = default switchtype = euroisdn priindication = outofband group = 2 signalling = pri_cpe channel => 1-30 ==end== Thanks. -- David Zanetti <david.zanetti@catalyst.net.nz> Team Leader, Systems Administration Catalyst IT Limited +64-4-8032233 +64-21-402260 -------------- next part -------------- A non-text attachment was scrubbed...

Just throwing this out here, hopefully someone can tell me why. *CLI> show version Asterisk CVS-HEAD-11/17/04-10:16:38 built by root@wanderer on a i686 running Linux Zap/g1 is pri_cpe to Bell Canada 5551234 is a normal POTS line I have busied out (handset offhook) exten => 1234,1,Dial(Zap/g1/5551234,,g) exten => 1234,n,NoOp(HANGUPCAUSE is ${HANGUPCAUSE} and DIALSTATUS is

...> > 12:58:11 WARNING[27273] chan_zap.c: Ignoring localprefix Jun 21 > > > 12:58:11 WARNING[27273] chan_zap.c: Ignoring privateprefix Jun 21 > > > 12:58:11 WARNING[27273] chan_zap.c: Ignoring unknownprefix Jun 21 > > > 12:58:11 WARNING[27273] chan_zap.c: Ignoring priindication Jun 21 > > > 12:58:11 WARNING[27273] chan_zap.c: Ignoring > facilityenable Jun 21 > > > 12:58:11 WARNING[27273] chan_zap.c: Ignoring signalling Jun 21 > > > 12:58:11 WARNING[27273] chan_zap.c: Ignoring signalling > > > > Missing '[channels]'...

...ZTHFC1/0/2 Clear (In use) 3 ZTHFC1/0/3 HDLCFCS (In use) so then I instructed asterisk to treat this as zap interface: box:/etc/asterisk# egrep -v '(^;|^$)' zapata.conf [channels] switchtype=euroisdn signalling=bri_cpe pridialplan=unknown prilocaldialplan=unknown immediate=no priindication=outofband overlapdial=no usecallerid=yes rxgain=0.0 txgain=0.0 context=inbound callerid=asreceived group=1 channel=1-2 defined this in the dialplan: office:/etc/asterisk# tail -21 extensions.conf| egrep -v '(^;|^$)' [inbound] ; my main number is "1234567", ; I am using 3-d...

...rough, channel 'SIP/Bob-00aaf150' status is 'CHANUNAVAIL' from extensions.conf exten => _1NXXXXXXXXX,1,Dial(Zap/G1/${EXTEN},,g) exten => _1NXXXXXXXXX,n,NoOp(${HANGUPCAUSE}) from zapata.conf > context=pri > group=1 > switchtype=national > signalling = pri_cpe > priindication = outofband > channel =>1-23

...ar me. 3. When I call an external conference and connect, the others cannot hear me. Zapata.conf [trunkgroups] [channels] ;context=from-zaptel ;context=line1 busydetect=yes callprogress=yes busycount=4 hanguponpolarityswitch=yes answeronpolarityswitch=yes usecallingpres=yes priindication=outofband pritimer=t305,50000 signalling=fxs_ks wink=50 useincomingcalleridonzaptransfer=yes echocancel=yes echocancelwhenbridged=yes faxdetect=yes rxgain=1.0 txgain=21.0 callgroup=1 group=1 usecallerid=yes callerid=asreceived cidstart=ring hidecallerid=no immediate=no pickupg...