search for: outofband

2014-02-06 11:09 GMT+01:00 giovanni.v <iax at keybits.org>: > Il 05/02/2014 8.42, Olivier ha scritto: > > channel then it depends upon what you have the priindication option >> set to. With >> priindication=outofband then a busy cause code is sent to the >> network and the call >> is hung up. With priindication=inband then a busy tone is sent >> after a possible >> PROGRESS message. >> >> > I'm gonna check what's really happening from caller's...

...ommunications said they did. Before I call to complain, is there an setting to turn this on in asterisk? I want to make sure that I have my side covered before I call XO. My current zaptel.conf is: context=from-pstn switchtype=national pridialplan=unknown prilocaldialplan=unknown priindication = outofband signalling=pri_cpe usecallerid=yes hidecallerid=no usecallingpres=yes echocancel=yes echocancelwhenbridged=no group=0 callgroup=1 pickupgroup=1 accountcode=I musiconhold=default channel => 1-23 -- -- Steven http://www.glimasoutheast.org

I am seeing some curious behaviour with a 1.2.32 system, which I do not understand and so can't work out how to fix it. I have a PRI routed to context default. Here is the complete default context: [default] exten => _9X.,1,Dial(IAX2/m1peer/${EXTEN:1}) exten => _20XX,1,Dial(IAX2/sipeer/${EXTEN}) exten => _X.,1,Dial(IAX2/m1peer/${EXTEN}) exten =>

...Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) 1 channels to configure. Setting echocan for channel 1 to mg2 <<chan_dahdi.conf>> [trunkgroups] [channels] language=en resetinterval=3600 inbanddisconnect=yes priindication=outofband signalling=fxo_ks usecallerid=yes cidsignalling=bell cidstart=polarity usedistinctiveringdetection=yes callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes r...

...zaptel.conf loadzone = it defaultzone = it span=1,1,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 span=2,0,0,ccs,hdb3,crc4 bchan=32-46 dchan=47 bchan=48-62 zapata.conf [channels] switchtype = euroisdn ;line signalling=pri_cpe pridialplan=unknown switchtype=euroisdn priindication = outofband echocancel=no overlapdial=yes immediate=no nationalprefix= internationalprefix= resetinterval=300 context=pri1 group=1 channel => 1-15 channel => 17-31 ;pbx signalling=pri_net pridialplan=international switchtype=euroisdn priindication=outofband echocancel=no overlapdial=yes immediate=no nat...

Hello, I just got off the phone with my PRI provider, and was told that I am not sending an expected message when I reject a call with a Cause Code for Unassigned(1) and Congestion (42). Busy works fine though... Anyhow, they are seeing the RELEASE COMPLETE message with cause code 1, however the tech told me they expect a PROGRESS indicator with a value between 1 and 10. Any ideas on how

...anyone have an example configuration that they have used with a 5ESS switch? Below is the my configuration from Zapata.conf and a sample extension I've tried to use to connect a call with new caller ID information provided by my PBX. Any insight is most appreciated. [channels] priindication = outofband usecallerid=yes cidsignalling=bell hidecallerid=no callwaiting=no usecallingpres=yes callwaitingcallerid=no threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=no rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no switchtype=5ess...

...n_zap.so failed! Ideas? I'm sure it's something simple I've missed. :) Config fragments follow: ==/etc/zaptel.conf== span=1,0,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone=nz defaultzone=nz ==end== ==/etc/asterisk/zapata.conf== context = default switchtype = euroisdn priindication = outofband group = 2 signalling = pri_cpe channel => 1-30 ==end== Thanks. -- David Zanetti <david.zanetti@catalyst.net.nz> Team Leader, Systems Administration Catalyst IT Limited +64-4-8032233 +64-21-402260 -------------- next part -------------- A non-text attachment was scrubbed... Name: not ava...

...callerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=no cancallforward=no callreturn=yes echocancel=yes echocancelwhenbridged=yes echotraining=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 callgroup=1 pickupgroup=1 immediate=no priindication=outofband group = 1 channel => 1-10 Regards, Adam Rybak

Hi all, Our Asterisk box sends calls outbound via either SIP (through our VoIP provider) or an E1 PRI (directly connected via a TE410P). When we dial a number that is engaged via our VoIP provider we get the following on the Asterisk console (numbers and IP addresses changed to protect the innocent): -- Called 12345678@sip-outbound -- Got SIP response 486 "Busy here" back from

...ar (In use) 3 ZTHFC1/0/3 HDLCFCS (In use) so then I instructed asterisk to treat this as zap interface: box:/etc/asterisk# egrep -v '(^;|^$)' zapata.conf [channels] switchtype=euroisdn signalling=bri_cpe pridialplan=unknown prilocaldialplan=unknown immediate=no priindication=outofband overlapdial=no usecallerid=yes rxgain=0.0 txgain=0.0 context=inbound callerid=asreceived group=1 channel=1-2 defined this in the dialplan: office:/etc/asterisk# tail -21 extensions.conf| egrep -v '(^;|^$)' [inbound] ; my main number is "1234567", ; I am using 3-digit internal e...

...= pri_net channel => 32-46,48-62 context = default group = 63 Span 4: WPE1/3 "wanpipe4 card 3" HDB3/CCS/CRC4 group=4,14 context=outrt-001-PSTN_E1 switchtype=qsig signalling=pri_cpe ;facilityenable=yes ;callprogress=yes pridialplan=unknown prilocaldialplan=unknown ;priindication = outofband ;overlapdial = incoming ;priexclusive = yes ;pritimer => t200,1000 ;pritimer => t313,4000 ;immediate=yes channel => 94-108,110-124 context = default group = 63 Any suggestion will be much appreciated. Regards, Mac

...#39;SIP/Bob-00aaf150' status is 'CHANUNAVAIL' from extensions.conf exten => _1NXXXXXXXXX,1,Dial(Zap/G1/${EXTEN},,g) exten => _1NXXXXXXXXX,n,NoOp(${HANGUPCAUSE}) from zapata.conf > context=pri > group=1 > switchtype=national > signalling = pri_cpe > priindication = outofband > channel =>1-23

Hi all, Our Asterisk box sends calls outbound via either SIP (through our VoIP provider) or an E1 PRI (directly connected via a TE410P). When we dial a number that is engaged via our VoIP provider we get the following on the Asterisk console (numbers and IP addresses changed to protect the innocent): -- Called 12345678@sip-outbound -- Got SIP response 486 "Busy here" back from

...When I call an external conference and connect, the others cannot hear me. Zapata.conf [trunkgroups] [channels] ;context=from-zaptel ;context=line1 busydetect=yes callprogress=yes busycount=4 hanguponpolarityswitch=yes answeronpolarityswitch=yes usecallingpres=yes priindication=outofband pritimer=t305,50000 signalling=fxs_ks wink=50 useincomingcalleridonzaptransfer=yes echocancel=yes echocancelwhenbridged=yes faxdetect=yes rxgain=1.0 txgain=21.0 callgroup=1 group=1 usecallerid=yes callerid=asreceived cidstart=ring hidecallerid=no immediate=no pickupgroup=1 ;contex...

...ytes LLC I have a single PRI ISDN 30 link to a Siemens Realitis DX. Here is my zapata.conf :- [channels] echocancel=no echocancelwhenbridged=no rxgain=-5.0 txgain=0 musiconhold=default language=en context=from-realitis switchtype=euroisdn pridialplan=unknown prilocaldialplan=unknown priindication=outofband signalling=pri_net usecallerid=yes cidsignalling=v23 hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes callgroup=1 pickupgroup=1 immediate=no overlapdial=yes progzone=uk resetinterval=43200 group...

...c/zaptel.conf span=1,1,0,ccs,hdb3,crc4 bchan=1-15 bchan=17-21 unused=22-31 dchan=16 loadzone=au defaultzone=au ----------------------------------- ----------------- [channels] language=en context=default switchtype=euroisdn pridialplan=unknown prilocaldialplan=unknown overlapdial=yes priindication=outofband signalling=pri_cpe rxwink=300 usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes restrictcid=no usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=y...

...l = ; you can add an empty speedial if you want an empty button (7960, 7970, 7920) speeddial = *97,voicemail, cfwdall = off ; activate the callforward stuff and softkeys cfwdbusy = off dtmfmode = inband ; inband or outofband. outofband is the native cisco dtmf tone play. ; Some phone model does not play dtmf tones while connected (bug?), so the default is inband imageversion = P00405000700 ; useful to upgrade old firmwares (the ones that do not load *.xml from...

hi, well, most of the things work right now due to the help of peter svensson, but after heavy use of our ericsson BP250 today several problems appeared. i split into several mails as they are seperate problems. * i can't signal Busy to the calling party. asterisk receives busy from the ericsson PBX but does not forward this to the external caller. i tried with exten =>

...d02a2f00c8b3#> |[trunkgroups] [channels] language=de switchtype=euroisdn pridialplan=unknown prilocaldialplan=unknown internationalprefix = 00 nationalprefix = 0 ;localprefix = VORWAHL ;privateprefix = VORWAHL+MSN ;unknownprefix = priindication = outofband facilityenable = yes usecallerid=yes callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes immediate=no echocancel=yes echocancelwhenbridged=yes echotraining=...