search for: idvendor

...d.rules -# only support USB, else ignore +# newer hiddev are part of the usbmisc class SUBSYSTEM=="usbmisc", GOTO="up_hid_chkdev" +# only support USB, else ignore SUBSYSTEM!="usb", GOTO="up_hid_end" # if usbraw device, ignore @@ -17,21 +20,31 @@ ATTRS{idVendor}=="03f0", ENV{UPOWER_VENDOR}="Hewlett Packard" ATTRS{idVendor}=="0463", ENV{UPOWER_VENDOR}="Eaton" ATTRS{idVendor}=="047c", ENV{UPOWER_VENDOR}="Dell" +ATTRS{idVendor}=="04d8", ENV{UPOWER_VENDOR}="Minibox" ATTRS{idVen...

Hey Guys, The ForceFeedback from my Microsoft Sidewinder ForceFeedback Wheel doesn't work with Wine. I compiled wine myself and "ac_cv_member_struct_ff_effect_direction=yes" was set in the config.log like it is told here: http://wiki.winehq.org/ForceFeedback I also checked that FF is working with BZFlag under Linux. When i play BZFlag with Wine, the FF-Effects are missing. I

Well, also below in dmesg: [ 190.249219] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110 26.11.2014, 03:05, "Victor Porton" <porton at narod.ru>: > A fragment of dmesg output (here idVendor=0665, idProduct=5161 is the UPS; the webcam is idVendor=17a1, idProduct=0128): > > [ ???1.317085] usb 4-1: new high-speed USB device number 2 using ehci-pci > [ ???1.405223] tsc: Refined TSC clocksource calibration: 3395.557 MHz > [ ???1.405228] Switching to clocksource tsc > [ ???1....

A fragment of dmesg output (here idVendor=0665, idProduct=5161 is the UPS; the webcam is idVendor=17a1, idProduct=0128): [ 1.317085] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.405223] tsc: Refined TSC clocksource calibration: 3395.557 MHz [ 1.405228] Switching to clocksource tsc [ 1.449642] usb 4-1: New USB...

...battery_scale_1dot0 }, /* e.g. ? */ diff --git a/src/nut/nut-2.4.3/scripts/udev/52-nut-usbups.rules b/etc/udev/rules.d/52-nut-usbups.rules index c8f0437..fbb03df 100644 --- a/src/nut/nut-2.4.3/scripts/udev/52-nut-usbups.rules +++ b/etc/udev/rules.d/52-nut-usbups.rules @@ -92,6 +92,8 @@ ATTR{idVendor}=="09ae", ATTR{idProduct}=="1008", MODE="664", GROUP="nut" ATTR{idVendor}=="09ae", ATTR{idProduct}=="2005", MODE="664", GROUP="nut" # e.g. TrippLite OMNI900LCD - usbhid-ups ATTR{idVendor}=="09ae", ATTR{id...

I use Debian jessie with nut-server 2.7.2-1+b3. Yesterday I've configured it for my new Advice PRS850 (a UPS with USB interface). I also have an USB webcam (and also USB mouse and keyboard, but that doesn't matter). When I start the program Cheese (a program which uses the webcam), I receive the following broadcast message: "Communications with UPS advice at localhost lost"

2015-06-08 13:09 GMT+02:00 Bastien Nocera <hadess at hadess.net>: > On Mon, 2015-06-08 at 10:13 +0200, Arnaud Quette wrote: > > -ATTRS{idVendor}=="06da", ENV{UPOWER_VENDOR}="Liebert" > > > > +ATTRS{idVendor}=="06da", ENV{UPOWER_VENDOR}="Phoenixtec Power Co., Ltd" > > I'm guessing this would require changes in NUT, so I should mention I > don't like that change. Maybe: &gt...

....ru> wrote: > Well, also below in dmesg: > > [ 190.249219] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110 -110 is -ETIMEDOUT. > 26.11.2014, 03:05, "Victor Porton" <porton at narod.ru>: >> A fragment of dmesg output (here idVendor=0665, idProduct=5161 is the UPS; the webcam is idVendor=17a1, idProduct=0128): >> ... >> [ 1.521492] usb 3-1.3: new low-speed USB device number 3 using ehci-pci >> [ 1.619257] usb 3-1.3: New USB device found, idVendor=0665, idProduct=5161 ... >> [ 1.693685] usb 3-1...

Salut Bastien 2015-06-04 13:04 GMT+02:00 Bastien Nocera <hadess at hadess.net>: > On Sat, 2015-05-30 at 18:51 +0200, Arnaud Quette wrote: > > > > > > 2015-05-29 14:09 GMT+02:00 Bastien Nocera <hadess at hadess.net>: > > > On Fri, 2015-05-29 at 13:59 +0200, Arnaud Quette wrote: > > > > Hi Richard and the list, > > > > > >

...t-0001.html> -------------- next part -------------- Index: scripts/upower/95-upower-hid.rules =================================================================== --- scripts/upower/95-upower-hid.rules (revision 3782) +++ scripts/upower/95-upower-hid.rules (working copy) @@ -15,6 +15,7 @@ ATTRS{idVendor}=="03f0", ENV{UPOWER_VENDOR}="Hewlett Packard" ATTRS{idVendor}=="0463", ENV{UPOWER_VENDOR}="Eaton" ATTRS{idVendor}=="047c", ENV{UPOWER_VENDOR}="Dell" +ATTRS{idVendor}=="04d8", ENV{UPOWER_VENDOR}="for getval()" ATTRS{...

On Tuesday 21 January 2020 19:52:01 Charles Lepple wrote: > sudo lsusb -v -d 0764:0501 copious output, containing this: idVendor 0x0764 Cyber Power System, Inc. idProduct 0x0501 CP1500 AVR UPS bcdDevice 0.01 iManufacturer 3 CPS iProduct 1 CP625HGa I take it that this is evidence they don't follow the spec to the letter. Here I get the same output with, or w...

Kjell Claesson wrote: > Then i have a problem. My computer is down due to a > faulty mainboard, Youch. I hate it when that heppens. Hope it wasn't because you got a power spike ;-) Let me or Georg know if you want us to run any debug code. Feels like a bcmxcp_usb driver bug to me since the bcmcxp serial driver works fine and all my other USB devices work fine (wifi adapter, memory

...5.160955] ehci-pci 0000:00:04.1: debug port 1 [ 5.161057] ehci-pci 0000:00:04.1: irq 22, io mem 0xd3489200 [ 5.171083] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 5.172030] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 5.172168] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.172245] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.172321] usb usb1: Product: EHCI Host Controller [ 5.172383] usb usb1: Manufacturer: Linux 3.15.0-rc4+ ehci_hcd [ 5.172448] usb usb1: SerialNumber: 0000:00:04.1 [ 5.172710] hub 1-0:...

> Hello everyone. I try to connect four PowerMust 2000 ups's via usb to one > computer using megatec_usb driver. But megatec_usb completly ignores port > directive in ups.conf, I even try port = /dev/null and megatec_usb founds > ups and it works. The 'port' is not used for USB connected devices, it's only needed for compatibility reasons. > Problem is that

On 10/07/15 04:26, Charles Lepple wrote: > On Jul 9, 2015, at 9:43 AM, paul at paulcarmichael.org wrote: > >> Is there currently a way of implementing NUT with an Ovislink Chrome 1500 UPS? > > Not sure. There was a thread in February talking about an Ovislink Chrome 1000, but I don't think we ever resolved what was causing the "Device busy" error: > >

...enerated from *.in > files based on configure parameters), so your package might still have > the rules file from 2.7.4 (which does not include protocol 1330). yes, the package installed by Mr. Coletti includes the new rules: # TrippLite [...] # e.g. TrippLite ECO550UPS - usbhid-ups ATTR{idVendor}=="09ae", ATTR{idProduct}=="1010", MODE="664", GROUP="dialout" # e.g. TrippLite SU3000LCD2UHV - usbhid-ups ATTR{idVendor}=="09ae", ATTR{idProduct}=="1330", MODE="664", GROUP="dialout" # e.g. TrippLite OMNI1000LCD -...

...mware before the GPS actually starts (used among other things when the GPS is soft bricked). When I connect the GPS to the host it gives: |root at host:~# journalctl -kf|| ||# GPS in MTP storage mode (default when reset)|| ||...|| ||janv. 23 23:02:51 host kernel: usb 2-4: New USB device found, idVendor=091e, idProduct=48db, bcdDevice= 0.01|| ||janv. 23 23:02:51 host kernel: usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5|| ||...|| ||# GPS in mass storage mode|| ||...|| ||janv. 23 23:01:29 host kernel: usb 2-4: New USB device found, idVendor=091e, idProduct=28db, bcdDevice= 5.0...

I have an FC5 system with a powerware 5110 usb ups. The system seems to find the UPS ------------------------------ [root@b1 src]# lsusb Bus 004 Device 001: ID 0000:0000 Bus 003 Device 002: ID 0592:0002 Powerware Corp. Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 005 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 ------------------------------- [root@b1

...the genericups man page) I get OL. But none of them detect OB or LB or SD (or any other state) when I cut the supply to the UPS. There's no serial control port. "dmesg | grep usb" gives me: usb 1-3.1: new low speed USB device number 4 using ehci_hcd usb 1-3.1: New USB device found, idVendor=0001, idProduct=0000 usb 1-3.1: New USB device strings: Mfr=1, Product=1, SerialNumber=1 usb 1-3.1: Product: ATCL FOR UPS usb 1-3.1: Manufacturer: ATCL FOR UPS usb 1-3.1: SerialNumber: ATCL FOR UPS usb 1-3.1: configuration #1 chosen from 1 choice usb 1-3.1: can't set config #1, error -71 and l...

Hi, I'm trying to use my saitek cyborg evolution to play with grand prix legends. The device is correctly recognized by linux as a 6 axis 12 button device: Code: jstest /dev/input/js0 Driver version is 2.1.0. Joystick (Saitek Cyborg USB Stick) has 6 axes (X, Y, Z, Rz, Hat0X, Hat0Y) and 12 buttons (Trigger, ThumbBtn, ThumbBtn2, TopBtn, TopBtn2, PinkieBtn, BaseBtn, BaseBtn2, BaseBtn3, BaseBtn4,