Nut upsuser - Nov 2014 - "Communications with UPS advice@localhost lost" when using an other USB device

I use Debian jessie with nut-server 2.7.2-1+b3.

Yesterday I've configured it for my new Advice PRS850 (a UPS with USB
interface).

I also have an USB webcam (and also USB mouse and keyboard, but that doesn't
matter).

When I start the program Cheese (a program which uses the webcam), I receive the
following broadcast message:

"Communications with UPS advice at localhost lost"

When I exit Cheese, I receive the following broadcast message:

"Communications with UPS advice at localhost established"

Please help to eliminate this buggy behavior.

Shall we consider this very message as a bug report, or should I report a bug
otherwise somewhere?

My /etc/nut/ups.conf :

maxretry = 3

[advice]
    driver = blazer_usb
    port = /dev/ttyS0
    vendorid = 0665
    productid = 5161


--
Victor Porton - http://portonvictor.org

A fragment of dmesg output (here idVendor=0665, idProduct=5161 is the UPS; the
webcam is idVendor=17a1, idProduct=0128):

[    1.317085] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.405223] tsc: Refined TSC clocksource calibration: 3395.557 MHz
[    1.405228] Switching to clocksource tsc
[    1.449642] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[    1.449648] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.450058] hub 4-1:1.0: USB hub found
[    1.450104] hub 4-1:1.0: 8 ports detected
[    1.521492] usb 3-1.3: new low-speed USB device number 3 using ehci-pci
[    1.619257] usb 3-1.3: New USB device found, idVendor=0665, idProduct=5161
[    1.619262] usb 3-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[    1.619265] usb 3-1.3: Product: USB to Serial
[    1.619268] usb 3-1.3: Manufacturer: INNO TECH
[    1.623072] hidraw: raw HID events driver (C) Jiri Kosina
[    1.625251] usbcore: registered new interface driver usbhid
[    1.625253] usbhid: USB HID core driver
[    1.626014] hid-generic 0003:0665:5161.0001: hiddev0,hidraw0: USB HID v1.00
Device [INNO TECH USB to Serial] on usb-0000:00:1a.0-1.3/input0
[    1.693685] usb 3-1.4: new full-speed USB device number 4 using ehci-pci
[    1.786441] usb 3-1.4: New USB device found, idVendor=17a1, idProduct=0128
[    1.786442] usb 3-1.4: New USB device strings: Mfr=32, Product=38,
SerialNumber=0
[    1.786444] usb 3-1.4: Product: USB2.0 JPEG WebCam
[    1.786445] usb 3-1.4: Manufacturer: TASCORP
[    1.857918] usb 3-1.5: new low-speed USB device number 5 using ehci-pci
[    1.953554] usb 3-1.5: New USB device found, idVendor=192f, idProduct=0416
[    1.953555] usb 3-1.5: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
[    1.953557] usb 3-1.5: Product: USB Optical Mouse
[    1.955908] input: USB Optical Mouse as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input0
[    1.956020] hid-generic 0003:192F:0416.0002: input,hidraw1: USB HID v1.11
Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1.5/input0
[    2.026157] usb 3-1.6: new low-speed USB device number 6 using ehci-pci
[    2.124421] usb 3-1.6: New USB device found, idVendor=1c4f, idProduct=0016
[    2.124423] usb 3-1.6: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[    2.124424] usb 3-1.6: Product: USB Keyboard
[    2.124425] usb 3-1.6: Manufacturer: SIGMACHIP
[    2.127151] input: SIGMACHIP USB Keyboard as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input1
[    2.127217] hid-generic 0003:1C4F:0016.0003: input,hidraw2: USB HID v1.10
Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input0


26.11.2014, 02:45, "Victor Porton" <porton at
narod.ru>:
> I use Debian jessie with nut-server 2.7.2-1+b3.
>
> Yesterday I've configured it for my new Advice PRS850 (a UPS with USB
interface).
>
> I also have an USB webcam (and also USB mouse and keyboard, but that
doesn't matter).
>
> When I start the program Cheese (a program which uses the webcam), I
receive the following broadcast message:
>
> "Communications with UPS advice at localhost lost"
>
> When I exit Cheese, I receive the following broadcast message:
>
> "Communications with UPS advice at localhost established"
>
> Please help to eliminate this buggy behavior.
>
> Shall we consider this very message as a bug report, or should I report a
bug otherwise somewhere?
>
> My /etc/nut/ups.conf :
>
> maxretry = 3
>
> [advice]
> ????driver = blazer_usb
> ????port = /dev/ttyS0
> ????vendorid = 0665
> ????productid = 5161
>
> --
> Victor Porton - http://portonvictor.org
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
--
Victor Porton - http://portonvictor.org

Well, also below in dmesg:

[  190.249219] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33
rq 9 len 8 ret -110

26.11.2014, 03:05, "Victor Porton" <porton at
narod.ru>:
> A fragment of dmesg output (here idVendor=0665, idProduct=5161 is the UPS;
the webcam is idVendor=17a1, idProduct=0128):
>
> [ ???1.317085] usb 4-1: new high-speed USB device number 2 using ehci-pci
> [ ???1.405223] tsc: Refined TSC clocksource calibration: 3395.557 MHz
> [ ???1.405228] Switching to clocksource tsc
> [ ???1.449642] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
> [ ???1.449648] usb 4-1: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
> [ ???1.450058] hub 4-1:1.0: USB hub found
> [ ???1.450104] hub 4-1:1.0: 8 ports detected
> [ ???1.521492] usb 3-1.3: new low-speed USB device number 3 using ehci-pci
> [ ???1.619257] usb 3-1.3: New USB device found, idVendor=0665,
idProduct=5161
> [ ???1.619262] usb 3-1.3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
> [ ???1.619265] usb 3-1.3: Product: USB to Serial
> [ ???1.619268] usb 3-1.3: Manufacturer: INNO TECH
> [ ???1.623072] hidraw: raw HID events driver (C) Jiri Kosina
> [ ???1.625251] usbcore: registered new interface driver usbhid
> [ ???1.625253] usbhid: USB HID core driver
> [ ???1.626014] hid-generic 0003:0665:5161.0001: hiddev0,hidraw0: USB HID
v1.00 Device [INNO TECH USB to Serial] on usb-0000:00:1a.0-1.3/input0
> [ ???1.693685] usb 3-1.4: new full-speed USB device number 4 using ehci-pci
> [ ???1.786441] usb 3-1.4: New USB device found, idVendor=17a1,
idProduct=0128
> [ ???1.786442] usb 3-1.4: New USB device strings: Mfr=32, Product=38,
SerialNumber=0
> [ ???1.786444] usb 3-1.4: Product: USB2.0 JPEG WebCam
> [ ???1.786445] usb 3-1.4: Manufacturer: TASCORP
> [ ???1.857918] usb 3-1.5: new low-speed USB device number 5 using ehci-pci
> [ ???1.953554] usb 3-1.5: New USB device found, idVendor=192f,
idProduct=0416
> [ ???1.953555] usb 3-1.5: New USB device strings: Mfr=0, Product=2,
SerialNumber=0
> [ ???1.953557] usb 3-1.5: Product: USB Optical Mouse
> [ ???1.955908] input: USB Optical Mouse as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input0
> [ ???1.956020] hid-generic 0003:192F:0416.0002: input,hidraw1: USB HID
v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1.5/input0
> [ ???2.026157] usb 3-1.6: new low-speed USB device number 6 using ehci-pci
> [ ???2.124421] usb 3-1.6: New USB device found, idVendor=1c4f,
idProduct=0016
> [ ???2.124423] usb 3-1.6: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
> [ ???2.124424] usb 3-1.6: Product: USB Keyboard
> [ ???2.124425] usb 3-1.6: Manufacturer: SIGMACHIP
> [ ???2.127151] input: SIGMACHIP USB Keyboard as
/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input1
> [ ???2.127217] hid-generic 0003:1C4F:0016.0003: input,hidraw2: USB HID
v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input0
>
> 26.11.2014, 02:45, "Victor Porton" <porton at narod.ru>:
>> ?I use Debian jessie with nut-server 2.7.2-1+b3.
>>
>> ?Yesterday I've configured it for my new Advice PRS850 (a UPS with
USB interface).
>>
>> ?I also have an USB webcam (and also USB mouse and keyboard, but that
doesn't matter).
>>
>> ?When I start the program Cheese (a program which uses the webcam), I
receive the following broadcast message:
>>
>> ?"Communications with UPS advice at localhost lost"
>>
>> ?When I exit Cheese, I receive the following broadcast message:
>>
>> ?"Communications with UPS advice at localhost established"
>>
>> ?Please help to eliminate this buggy behavior.
>>
>> ?Shall we consider this very message as a bug report, or should I
report a bug otherwise somewhere?
>>
>> ?My /etc/nut/ups.conf :
>>
>> ?maxretry = 3
>>
>> ?[advice]
>> ?????driver = blazer_usb
>> ?????port = /dev/ttyS0
>> ?????vendorid = 0665
>> ?????productid = 5161
>>
>> ?--
>> ?Victor Porton - http://portonvictor.org
>>
>> ?_______________________________________________
>> ?Nut-upsuser mailing list
>> ?Nut-upsuser at lists.alioth.debian.org
>> ?http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
>
> --
> Victor Porton - http://portonvictor.org
>
> _______________________________________________
> Nut-upsuser mailing list
> Nut-upsuser at lists.alioth.debian.org
> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
--
Victor Porton - http://portonvictor.org