Victor Porton
2014-Nov-26 00:33 UTC
[Nut-upsuser] "Communications with UPS advice@localhost lost" when using an other USB device
I use Debian jessie with nut-server 2.7.2-1+b3.
Yesterday I've configured it for my new Advice PRS850 (a UPS with USB
interface).
I also have an USB webcam (and also USB mouse and keyboard, but that doesn't
matter).
When I start the program Cheese (a program which uses the webcam), I receive the
following broadcast message:
"Communications with UPS advice at localhost lost"
When I exit Cheese, I receive the following broadcast message:
"Communications with UPS advice at localhost established"
Please help to eliminate this buggy behavior.
Shall we consider this very message as a bug report, or should I report a bug
otherwise somewhere?
My /etc/nut/ups.conf :
maxretry = 3
[advice]
driver = blazer_usb
port = /dev/ttyS0
vendorid = 0665
productid = 5161
--
Victor Porton - http://portonvictor.org
Victor Porton
2014-Nov-26 01:05 UTC
[Nut-upsuser] "Communications with UPS advice@localhost lost" when using an other USB device
A fragment of dmesg output (here idVendor=0665, idProduct=5161 is the UPS; the webcam is idVendor=17a1, idProduct=0128): [ 1.317085] usb 4-1: new high-speed USB device number 2 using ehci-pci [ 1.405223] tsc: Refined TSC clocksource calibration: 3395.557 MHz [ 1.405228] Switching to clocksource tsc [ 1.449642] usb 4-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.449648] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.450058] hub 4-1:1.0: USB hub found [ 1.450104] hub 4-1:1.0: 8 ports detected [ 1.521492] usb 3-1.3: new low-speed USB device number 3 using ehci-pci [ 1.619257] usb 3-1.3: New USB device found, idVendor=0665, idProduct=5161 [ 1.619262] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.619265] usb 3-1.3: Product: USB to Serial [ 1.619268] usb 3-1.3: Manufacturer: INNO TECH [ 1.623072] hidraw: raw HID events driver (C) Jiri Kosina [ 1.625251] usbcore: registered new interface driver usbhid [ 1.625253] usbhid: USB HID core driver [ 1.626014] hid-generic 0003:0665:5161.0001: hiddev0,hidraw0: USB HID v1.00 Device [INNO TECH USB to Serial] on usb-0000:00:1a.0-1.3/input0 [ 1.693685] usb 3-1.4: new full-speed USB device number 4 using ehci-pci [ 1.786441] usb 3-1.4: New USB device found, idVendor=17a1, idProduct=0128 [ 1.786442] usb 3-1.4: New USB device strings: Mfr=32, Product=38, SerialNumber=0 [ 1.786444] usb 3-1.4: Product: USB2.0 JPEG WebCam [ 1.786445] usb 3-1.4: Manufacturer: TASCORP [ 1.857918] usb 3-1.5: new low-speed USB device number 5 using ehci-pci [ 1.953554] usb 3-1.5: New USB device found, idVendor=192f, idProduct=0416 [ 1.953555] usb 3-1.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 1.953557] usb 3-1.5: Product: USB Optical Mouse [ 1.955908] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input0 [ 1.956020] hid-generic 0003:192F:0416.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1.5/input0 [ 2.026157] usb 3-1.6: new low-speed USB device number 6 using ehci-pci [ 2.124421] usb 3-1.6: New USB device found, idVendor=1c4f, idProduct=0016 [ 2.124423] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.124424] usb 3-1.6: Product: USB Keyboard [ 2.124425] usb 3-1.6: Manufacturer: SIGMACHIP [ 2.127151] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input1 [ 2.127217] hid-generic 0003:1C4F:0016.0003: input,hidraw2: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input0 26.11.2014, 02:45, "Victor Porton" <porton at narod.ru>:> I use Debian jessie with nut-server 2.7.2-1+b3. > > Yesterday I've configured it for my new Advice PRS850 (a UPS with USB interface). > > I also have an USB webcam (and also USB mouse and keyboard, but that doesn't matter). > > When I start the program Cheese (a program which uses the webcam), I receive the following broadcast message: > > "Communications with UPS advice at localhost lost" > > When I exit Cheese, I receive the following broadcast message: > > "Communications with UPS advice at localhost established" > > Please help to eliminate this buggy behavior. > > Shall we consider this very message as a bug report, or should I report a bug otherwise somewhere? > > My /etc/nut/ups.conf : > > maxretry = 3 > > [advice] > ????driver = blazer_usb > ????port = /dev/ttyS0 > ????vendorid = 0665 > ????productid = 5161 > > -- > Victor Porton - http://portonvictor.org > > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser at lists.alioth.debian.org > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser-- Victor Porton - http://portonvictor.org
Victor Porton
2014-Nov-26 01:17 UTC
[Nut-upsuser] "Communications with UPS advice@localhost lost" when using an other USB device
Well, also below in dmesg: [ 190.249219] usb 3-1.3: usbfs: USBDEVFS_CONTROL failed cmd blazer_usb rqt 33 rq 9 len 8 ret -110 26.11.2014, 03:05, "Victor Porton" <porton at narod.ru>:> A fragment of dmesg output (here idVendor=0665, idProduct=5161 is the UPS; the webcam is idVendor=17a1, idProduct=0128): > > [ ???1.317085] usb 4-1: new high-speed USB device number 2 using ehci-pci > [ ???1.405223] tsc: Refined TSC clocksource calibration: 3395.557 MHz > [ ???1.405228] Switching to clocksource tsc > [ ???1.449642] usb 4-1: New USB device found, idVendor=8087, idProduct=0024 > [ ???1.449648] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > [ ???1.450058] hub 4-1:1.0: USB hub found > [ ???1.450104] hub 4-1:1.0: 8 ports detected > [ ???1.521492] usb 3-1.3: new low-speed USB device number 3 using ehci-pci > [ ???1.619257] usb 3-1.3: New USB device found, idVendor=0665, idProduct=5161 > [ ???1.619262] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ ???1.619265] usb 3-1.3: Product: USB to Serial > [ ???1.619268] usb 3-1.3: Manufacturer: INNO TECH > [ ???1.623072] hidraw: raw HID events driver (C) Jiri Kosina > [ ???1.625251] usbcore: registered new interface driver usbhid > [ ???1.625253] usbhid: USB HID core driver > [ ???1.626014] hid-generic 0003:0665:5161.0001: hiddev0,hidraw0: USB HID v1.00 Device [INNO TECH USB to Serial] on usb-0000:00:1a.0-1.3/input0 > [ ???1.693685] usb 3-1.4: new full-speed USB device number 4 using ehci-pci > [ ???1.786441] usb 3-1.4: New USB device found, idVendor=17a1, idProduct=0128 > [ ???1.786442] usb 3-1.4: New USB device strings: Mfr=32, Product=38, SerialNumber=0 > [ ???1.786444] usb 3-1.4: Product: USB2.0 JPEG WebCam > [ ???1.786445] usb 3-1.4: Manufacturer: TASCORP > [ ???1.857918] usb 3-1.5: new low-speed USB device number 5 using ehci-pci > [ ???1.953554] usb 3-1.5: New USB device found, idVendor=192f, idProduct=0416 > [ ???1.953555] usb 3-1.5: New USB device strings: Mfr=0, Product=2, SerialNumber=0 > [ ???1.953557] usb 3-1.5: Product: USB Optical Mouse > [ ???1.955908] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input0 > [ ???1.956020] hid-generic 0003:192F:0416.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1.5/input0 > [ ???2.026157] usb 3-1.6: new low-speed USB device number 6 using ehci-pci > [ ???2.124421] usb 3-1.6: New USB device found, idVendor=1c4f, idProduct=0016 > [ ???2.124423] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 > [ ???2.124424] usb 3-1.6: Product: USB Keyboard > [ ???2.124425] usb 3-1.6: Manufacturer: SIGMACHIP > [ ???2.127151] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input1 > [ ???2.127217] hid-generic 0003:1C4F:0016.0003: input,hidraw2: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1a.0-1.6/input0 > > 26.11.2014, 02:45, "Victor Porton" <porton at narod.ru>: >> ?I use Debian jessie with nut-server 2.7.2-1+b3. >> >> ?Yesterday I've configured it for my new Advice PRS850 (a UPS with USB interface). >> >> ?I also have an USB webcam (and also USB mouse and keyboard, but that doesn't matter). >> >> ?When I start the program Cheese (a program which uses the webcam), I receive the following broadcast message: >> >> ?"Communications with UPS advice at localhost lost" >> >> ?When I exit Cheese, I receive the following broadcast message: >> >> ?"Communications with UPS advice at localhost established" >> >> ?Please help to eliminate this buggy behavior. >> >> ?Shall we consider this very message as a bug report, or should I report a bug otherwise somewhere? >> >> ?My /etc/nut/ups.conf : >> >> ?maxretry = 3 >> >> ?[advice] >> ?????driver = blazer_usb >> ?????port = /dev/ttyS0 >> ?????vendorid = 0665 >> ?????productid = 5161 >> >> ?-- >> ?Victor Porton - http://portonvictor.org >> >> ?_______________________________________________ >> ?Nut-upsuser mailing list >> ?Nut-upsuser at lists.alioth.debian.org >> ?http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser > > -- > Victor Porton - http://portonvictor.org > > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser at lists.alioth.debian.org > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser-- Victor Porton - http://portonvictor.org
Reasonably Related Threads
- "Communications with UPS advice@localhost lost" when using an other USB device
- "Communications with UPS advice@localhost lost" when using an other USB device
- "Communications with UPS advice@localhost lost" when using an other USB device
- Do I need to configure times and percents?
- Do I need to configure times and percents?