search for: garbles

Hi, I've had problems with MixMonitor recordings. A lot (I'd say almost 50%) of those are corrupted (can`t be opened) or garbled. That is on only one server, which is using the same Asterisk version (1.6.2.18) as the other servers which are mostly fine. What can be the cause? The conversation themselves are reportedly of good quality, only the recording is a problem. Hint:

I just merged drm (Direct Rendering) from HEAD. - Support for latest Intel chips - Support and fixes for many AMD/ATI chips r500 and below - Support AMD/ATI IGP based chips (rs690/rs485) - Lots of code cleanups - Lots of other fixes and changes since the existing drm is 2+ years old If you are experiencing a "garbled" screen with

I'm having problems with the voicemail prompts. The beginning of each prompt is garbled. Prompts "edian mail" and "assword" can be recognized, but when it starts on the short phrases it is completely garbled. It is almost like the subsequent phrase starts before the current phrase finishes. I have isolated the LAN to the * box and the phones, so LAN congestion is

Hello, I just bought a Snom-320 from ATAComm. I plugged it into my LAN, registered it with *, etc. All my other SIP gear is Sipura and works fine, both on the LAN and over the Internet. The new Snom seems like it can't process the audio from the handset mic. A steady tone is garbled, even on the LAN. I've contacted ATAComm, Snom and the company representing Snom in the US. So

I am having a problem with asterisk voice mail messages that seems to be intermittent. Though the problem occurs most of the time, on rare occasions it will work fine - rare enough that I can't pin down what it is that works. The problem is that voice mail message get played back garbled. Occasionally, I can make out moments of a voice or another sound that may be in the actual message,

Full_Name: Ross Boylan Version: 2.10.0 OS: Windows XP Submission from: (NULL) (198.144.201.14) Some of the help for setGeneric seems to have been garbled. In the section "Basic Use", 5th paragraph (where the example counts as a single line 3rd paragraph) it says <quote> Note that calling 'setGeneric()' in this form is not strictly necessary before calling

For posterity's sake, this problem was solved by removing the "serial" command and restoring "console" to the default of 1, thus completely relying on the BIOS console redirection instead of having ISOLINUX write to and read from the serial port. Thanks to Peter for his help a while back. -----Original Message----- From: Syslinux [mailto:syslinux-bounces at zytor.com] On

Hello, I have problem that menus on windows soft under wine are garbled (mojibake.) I'm Japanese and I've just started to use wine under CentOS5 because I want to use English-Japanese dictionary viewing software. Installing wine is fine both English and Japanese locale where wine related soft displays Japanese correctly even on menus. But my dictionary viewing soft under wine has

All, Has anybody else experienced garbled voice between a phone using alaw/ulaw and one using iLBC? I have a Nokia E series phone with a preference to use iLBC and this works fine in Asterisk 1.2. However, since moving to 1.4 - I get garbled voice on Inbound (g711->iLBC). Outbound voice seems fine (iLBC->g711) though. It's not a 20/30ms framing issue as the phone uses 30ms

Hello Just a sanity check. I'm seeing a garbled display with top. I rebuild kernel and world a couple times, I even rm -rf /usr/include to make sure I was up to date. Anybody else seeing this? Thanks, Eric

We have a system that is designed with no VGA port, graphics card, or keyboard, only a serial console. We're trying to boot a Linux via ISOLINUX. The problem is that when ISOLINUX comes up, the screen is usually garbled. Not always; sometimes it's intact, sometimes it's completely blank. When it is garbled, it is NOT the garbled text of a wrong baud rate. Rather, it looks like

...is "Intel(R) Pentium(R) 4 CPU 3.00GHz" (with HyperThreading disabled). My data is real-world audio captured from a physical speaker and mic setup in a room, by the left and right channels of the same soundcard input, and is sampled at 32 kHz. 1.2beta1 AEC without --enable-fixed-point garbles the audio up whether I claim it is sampled at 8 kHz or 32 kHz in testecho.c, it just does so differently. I can't hear anything of my original audio, instead I hear a very loud (full-scale), regularly repeating noise. When I look at the waveform, it looks a bit like 1/x for x>0, where ov...

...R) 4 CPU 3.00GHz" (with > HyperThreading disabled). > > My data is real-world audio captured from a physical speaker and mic > setup in a room, by the left and right channels of the same soundcard > input, and is sampled at 32 kHz. 1.2beta1 AEC without > --enable-fixed-point garbles the audio up whether I claim it is sampled > at 8 kHz or 32 kHz in testecho.c, it just does so differently. I can't > hear anything of my original audio, instead I hear a very loud > (full-scale), regularly repeating noise. When I look at the waveform, it > looks a bit like 1/x for...

I wrote an R wrapper function (phylpro) around a C function (Rphylpro). The first time I'm running my function, it runs with no errors. The second time I'm trying to run it, I get an error message with the first argument to .Call garbled. Set up: > dyn.load("Phylpro.so") > source("phylpro.R") > WinHalfWidth<-30 > permReps<-10 > breaks<-c(548,

For some reason a couple weeks ago users began experiencing garbled audio in one direction when dialing out via our VoIP provider. This happened at multiple sites simultaneously. The VoIP provider doesn't think it's their problem. If I switch to another codec so that Asterisk transcodes everything is fine. On conference calls (where Asterisk gets in the middle to relay ulaw to all

Hi all! I can't for the life of me get xen to run - under both stable and testing the packages give a garbled local console right after dom0 is finished booting, just when one would expect a login prompt. The garbled screen looks a bit like screens full of kernel booting messages scrolling/paging by at breakneck speed. Lines are tearing and overlapping ... difficult to describe. Anyway, it

When I try to run a certain DirectX app, all of the fonts become garbled. A screenshot is at http://jackmcbarn.no-ip.org/login.png I've already tried setting HKEY_CURRENT_USER\Software\Wine\X11 Driver\ClientSideWithRender to N, which didn't appear to have any effect at all. Increasing the DPI increased the font size, but they were still garbled.

I've been having random problems when I make long distance calls using either VoicePulse or Nufone. Sometimes the calls go through clear, and other calls (or even just part of a call) the person on the other end just hears garbled voice, or really broken up voice. Sometimes it lasts for only a few seconds, but other times it goes on for a few minutes until I give up on the call. At

Hi all I am using asterisk 11.24.1 on a centos 5 machine. kernel 2.6.18 flavor. (x86_64). I have about SIP 150 endpoints on it. when I send a message I'm getting garbled audio. I used to have a single PRI card in the box - but something happened and that connection no longer worked. I removed the card and also removed the system.conf and chan_dahdi entries. I am using ConfBridge in a PA

http://bugs.freedesktop.org/show_bug.cgi?id=10957 Summary: Garbled console text with XAA enabled Product: xorg Version: 7.1 Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org ReportedBy: