search for: garbled

Hi, I've had problems with MixMonitor recordings. A lot (I'd say almost 50%) of those are corrupted (can`t be opened) or garbled. That is on only one server, which is using the same Asterisk version (1.6.2.18) as the other servers which are mostly fine. What can be the cause? The conversation themselves are reportedly of good quality, only the recording is a problem. Hint: this server does not have PRI Digium cards...

...or latest Intel chips - Support and fixes for many AMD/ATI chips r500 and below - Support AMD/ATI IGP based chips (rs690/rs485) - Lots of code cleanups - Lots of other fixes and changes since the existing drm is 2+ years old If you are experiencing a "garbled" screen with certain pci/pci-e based radeons, I have another patch in HEAD that isn't included yet. thanks, robert. -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 195 bytes Desc: This is a digitally...

I'm having problems with the voicemail prompts. The beginning of each prompt is garbled. Prompts "edian mail" and "assword" can be recognized, but when it starts on the short phrases it is completely garbled. It is almost like the subsequent phrase starts before the current phrase finishes. I have isolated the LAN to the * box and the phones, so LAN congestio...

Hello, I just bought a Snom-320 from ATAComm. I plugged it into my LAN, registered it with *, etc. All my other SIP gear is Sipura and works fine, both on the LAN and over the Internet. The new Snom seems like it can't process the audio from the handset mic. A steady tone is garbled, even on the LAN. I've contacted ATAComm, Snom and the company representing Snom in the US. So far, ATAComm hasn't helped at all. The tech just said "I dunno," and referred me to the US Snom rep co. Snom has replied, but the time zone differential and language barrier is m...

I am having a problem with asterisk voice mail messages that seems to be intermittent. Though the problem occurs most of the time, on rare occasions it will work fine - rare enough that I can't pin down what it is that works. The problem is that voice mail message get played back garbled. Occasionally, I can make out moments of a voice or another sound that may be in the actual message, though it's far too diluted with garbling and chirps to detect any words or phrases. When running asterisk -r, I will get a message on the console after the system completes playback of the fi...

Full_Name: Ross Boylan Version: 2.10.0 OS: Windows XP Submission from: (NULL) (198.144.201.14) Some of the help for setGeneric seems to have been garbled. In the section "Basic Use", 5th paragraph (where the example counts as a single line 3rd paragraph) it says <quote> Note that calling 'setGeneric()' in this form is not strictly necessary before calling 'setMethod()' for the same function. If the fu...

...stead of having ISOLINUX write to and read from the serial port. Thanks to Peter for his help a while back. -----Original Message----- From: Syslinux [mailto:syslinux-bounces at zytor.com] On Behalf Of Eric Ewanco Sent: Friday, August 08, 2014 1:53 PM To: syslinux at zytor.com Subject: [syslinux] Garbled menu on ISOLINUX We have a system that is designed with no VGA port, graphics card, or keyboard, only a serial console. We're trying to boot a Linux via ISOLINUX. The problem is that when ISOLINUX comes up, the screen is usually garbled. Not always; sometimes it's intact, sometimes it...

Hello, I have problem that menus on windows soft under wine are garbled (mojibake.) I'm Japanese and I've just started to use wine under CentOS5 because I want to use English-Japanese dictionary viewing software. Installing wine is fine both English and Japanese locale where wine related soft displays Japanese correctly even on menus. But my dictionary vie...

All, Has anybody else experienced garbled voice between a phone using alaw/ulaw and one using iLBC? I have a Nokia E series phone with a preference to use iLBC and this works fine in Asterisk 1.2. However, since moving to 1.4 - I get garbled voice on Inbound (g711->iLBC). Outbound voice seems fine (iLBC->g711) though. It'...

Hello Just a sanity check. I'm seeing a garbled display with top. I rebuild kernel and world a couple times, I even rm -rf /usr/include to make sure I was up to date. Anybody else seeing this? Thanks, Eric

We have a system that is designed with no VGA port, graphics card, or keyboard, only a serial console. We're trying to boot a Linux via ISOLINUX. The problem is that when ISOLINUX comes up, the screen is usually garbled. Not always; sometimes it's intact, sometimes it's completely blank. When it is garbled, it is NOT the garbled text of a wrong baud rate. Rather, it looks like someone is interleaving cursor escape sequences into the text; there are lots of [ and [H and semicolons and digits and so forth...

...for 3 minutes of audio) and I get back good audio. If I configure (and compile) speex-1.2beta1 with ./configure --enable-shared=no --enable-static=yes it compiles, but with the same input files testecho runs very long (say about 21-24 minutes, probably data-dependent), and the output audio is garbled up. It does the same with --enable-sse. But with --enable-fixed-point, AEC returns to normal. This is happening on a Gentoo stable (1.12.4) system, gcc 4.1.1, glibc 2.4, processor is "Intel(R) Pentium(R) 4 CPU 3.00GHz" (with HyperThreading disabled). My data is real-world audio capt...

...k good audio. > > If I configure (and compile) speex-1.2beta1 with > > ./configure --enable-shared=no --enable-static=yes > > it compiles, but with the same input files testecho runs very long (say > about 21-24 minutes, probably data-dependent), and the output audio is > garbled up. > > It does the same with --enable-sse. > > But with --enable-fixed-point, AEC returns to normal. > > This is happening on a Gentoo stable (1.12.4) system, gcc 4.1.1, glibc > 2.4, processor is "Intel(R) Pentium(R) 4 CPU 3.00GHz" (with > HyperThreading disabl...

I wrote an R wrapper function (phylpro) around a C function (Rphylpro). The first time I'm running my function, it runs with no errors. The second time I'm trying to run it, I get an error message with the first argument to .Call garbled. Set up: > dyn.load("Phylpro.so") > source("phylpro.R") > WinHalfWidth<-30 > permReps<-10 > breaks<-c(548, 735, 832) First call to phylpro succeeds: > b<-phylpro("simulinfile", breaks, WinHalfWidth, permReps) > Second call to phylpro...

For some reason a couple weeks ago users began experiencing garbled audio in one direction when dialing out via our VoIP provider. This happened at multiple sites simultaneously. The VoIP provider doesn't think it's their problem. If I switch to another codec so that Asterisk transcodes everything is fine. On conference calls (where Asterisk gets in the...

Hi all! I can't for the life of me get xen to run - under both stable and testing the packages give a garbled local console right after dom0 is finished booting, just when one would expect a login prompt. The garbled screen looks a bit like screens full of kernel booting messages scrolling/paging by at breakneck speed. Lines are tearing and overlapping ... difficult to describe. Anyway, it doesn't stop...

When I try to run a certain DirectX app, all of the fonts become garbled. A screenshot is at http://jackmcbarn.no-ip.org/login.png I've already tried setting HKEY_CURRENT_USER\Software\Wine\X11 Driver\ClientSideWithRender to N, which didn't appear to have any effect at all. Increasing the DPI increased the font size, but they were still garbled.

I've been having random problems when I make long distance calls using either VoicePulse or Nufone. Sometimes the calls go through clear, and other calls (or even just part of a call) the person on the other end just hears garbled voice, or really broken up voice. Sometimes it lasts for only a few seconds, but other times it goes on for a few minutes until I give up on the call. At first I thought it was just a problem with our ISP, but I also have a Packet 8 phone that works just fine even when Asterisk is having these...

Hi all I am using asterisk 11.24.1 on a centos 5 machine. kernel 2.6.18 flavor. (x86_64). I have about SIP 150 endpoints on it. when I send a message I'm getting garbled audio. I used to have a single PRI card in the box - but something happened and that connection no longer worked. I removed the card and also removed the system.conf and chan_dahdi entries. I am using ConfBridge in a PA kind of mode so all endpoints are muted. how do I monitor any dahdi timing?...

http://bugs.freedesktop.org/show_bug.cgi?id=10957 Summary: Garbled console text with XAA enabled Product: xorg Version: 7.1 Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau AssignedTo: nouveau at lists.freedesktop.org...