zaptel.conf:
span=1,1,0,esf,b8zs
e&m=1-24
zapata.conf:
;we are using e&m wink, not e&m, so this is just reference for us.
context=from-pstn
signalling=em_w
emdigitwait=500
rxwink=300
immediate=no
rxgain=0.0
txgain=0.0
busydetect=yes
group=0
channel=> 1-24
--
--
Steven
May you have the peace and freedom that come from abandoning all hope of having
a better past.
--- - --- - - - - - - - -- - - - --- - ------ - -
--- - - -- - - - -- - - -
"Dan Elder" <isbeen@izmedia.com> wrote in message
news:POEPJKKIACNHGGMFNPNPOEHEGNAA.isbeen@izmedia.com...> Hi again, I'm trying to setup our non pri T1 (they call it a Long
Distance
> T1), our current pbx has the signaling set to E&M, I can set em in
> zapata.conf, but I'm trying to track down the proper entries for the
> zaptel.conf file. The digium docs only show a PRI example. Our current
> system has these settings:
>
> Signalling: E&M
> Framing mode: ESF
> Line Coding: B8SZ
>
> here's my bastardized entry right now (this doesn't work)
>
>
> span=1,1,0,esf,b8zs
> #fxsks=1-23
>
> asterisk won't start like this & shows the following:
>
> Jan 13 11:18:41 ERROR[4610] chan_zap.c: Signalling requested on channel 1
is
> E & M Immediate but line is in FXS Kewlstart signalling
> Jan 13 11:18:41 ERROR[4610] chan_zap.c: Unable to register channel
'1-23'
> Jan 13 11:18:41 WARNING[4610] loader.c: chan_zap.so: load_module failed,
> returning -1
> Jan 13 11:18:41 WARNING[4610] loader.c: Loading module chan_zap.so failed!
>
> Is there a setting other than fxsks,fxsgs,fxsls that I should use for these
> lines? (i.e. something like fxsem?)
>
> Thanks in advance
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>