search for: etsi

Hi All, I've bought a R2Adapter to convert R2Digital to ISDN. I am trying to config E100P card but D-Channel is down. I know R2Adapter uses ETSI ISDN Protocol so I tried unsucessfully setup switchtype to EuroISDN. Any clue? Daniel

...n_capi? I know they probably work fine with mutliHFC cards with either bristuff of chan_misdn but since I have some spare Divas, I was curious about their potential as phone ports. The Diva's 3 and 4 ports are already set to NT mode at boot time: /sbin/divactrl load -SeparateConfig -c 1 -f ETSI -f1 ETSI -f2 ETSI -u2 -x2 -f3 ETSI -u3 -x3 And I think the capi.conf (using Armin's 0.6.1 version) looks OK: [DIVA2] ntmode=yes isdnmode=ptp incomingmsn=* controller=4 group=3 accountcode=diva context=international echosquelch=0 echocancel=no devices=1 But when I plug the phone in...

...irect PSTN service operator. So at that moment I was using *1.0.9. than I changed to asterisk@home 1.3(1.0.9). I got same result. Then I connected an caller id analog phone to X100P phone port . I could see all CIDs from all operators (PSTN &GSM) I searched CID standards. Our country is using ETSI standards. But I am not sure about which method we are using ( FSK or DTMF) Then trials and patch searches and I find out some but no result, even I lost CID completely. I setup system again and again. I am using Debian 3.1and as asterisk 1- asterisk 1.0.9 with zaptel 1.0.9 2- asterisk 1.2 beta...

Hello, All :) Regarding to incoming caller ID on PSTN line, which one is best supported by asterisk: is it FSK ETSI or FSK US? I bought some caller ID converter hardware (convert DTMF to FSK and vice versa) but still asterisk can not detect it. The converter has a switch FSK ETSI or FSK US This is what I put in /etc/asterisk/chan_dahdi.conf ... cidsignalling=bell cidstart=ring ... If after buying this converte...

Hello I've been googling for a couple of days now, but still can't figure out what to put in zapata.conf to get it to report CID. Unless I'm mistaken, France uses ETSI FSK for CID method and bell 202 as CID FSK Standard: http://img219.imageshack.us/img219/7207/linksys3102cid1jj7.jpg http://img219.imageshack.us/img219/4625/linksys3102cid2ld5.jpg Does Zaptel support those on Digium TDM400 clones like those from OpenVox? Thank you.

Hi, Our potentiel next phone provider ask me a question i can't answer for sure, maybe someone here knows ? He says that is equipement only support VN4 protocol or more, or ETSI, however i can't find matching terms in the digium documentation or the chan_dahdi/dahdi/system.conf files... Any idea ? regards

I'd be grateful if anyone here could comment knowledgeably on an idea that I have had, as to whether it should be possible or not. Consider two Asterisk boxes, each with one or more E1s on EuroISDN. Each box has a different telephone number that hunts across all its E1 channels. In addition there is another number that hunts across all the channels on all the boxes. A call comes in to one of

Hi, since version 1.4.12 the libpri package supports ETSI Explicit Call Transfer feature: http://downloads.asterisk.org/pub/telephony/libpri/ChangeLog-1.4.12 Does anyone know, how to use this feature in the dialplan? I can not find any hints in the asterisk doc. Best regards, -Thorsten-

...answer a call (e.g. telephone or fax) as far as i dug into the source neither the BC nor the HLC or LLC data is forwarded to a dialplan variable and only the BC is decoded in libpri. has anyone a solution for this? is there any usable documentation on the HLC or LLC octets (bytes)? i searched etsi and was overwhelmed with the searchresults (1531). what i need to modify libpri would be a table of possible values and where to find the HLC and LLC fields in the D-Channel. regards frank

Hi does anyone have a definitive list of countries other than those listed on the wiki which are supporting app_SMS on landlines using ETSI ES 201 912 ?? Thanks Tim Robinson Basingstoke, UK

...AH installation where a customer wants to install an active Eicon DIVA BRI card. AAH is built on Centos 3.5 which is currently at kernel 2.4.21.37. Support for Eicon active cards is built-in. I've debugged and run the A@H install-Eicondiva script but when I try to run divactrl load -c 1 -f ETSI -Debug I get a response : A: can't get card type for DIVA adapter number 1 dmesg reveals that lincfg.c has reported the error : DIVA Server Driver - initialising DIVA Server Driver - Version 2.0.16 Divas: DIVA Server BRI (U) Found Divas: DIVA I/O Base already in use 0xf1000000-0xf100001f Div...

Where can I get E1 and/or Euro-ISDN specifications/data sheets? Are there specs for other E./G./Q./etc. protocols as well? Thanks!

Hi, Background: I''m writing a piece of code to display etsy.com items in a squidoo module. Squidoo provide a module development kit which uses ajax and php. See the example here: http://www.demido.co.uk/etsy (Currently only works in FF). The user enters a valid etsy userID, hit go, an ajax.updater passes the userid to a php script the php script goes off and finds the items returns

...ected to that interface. The asterisk and diva drivers are working ok but i cannot communicate to outside via this bri. Xlite gives me the message: "call failed: declined". Anyone have experience with this setup? What are the main parameters for bri card configuration? D-channel protocol: ETSI-DSS1 or other? Interface mode: NT or TE? Direct Inward Dialing (DID): Yes ou no? (MSN ou DID?) Thanks by any kind of help! Best regards, PS.

Chris you might know the answer to my HUUUUUUGE problem A few weeks ago you posted this message: "I have an ISDN PRI supplied by NTL (ex Diamond Cable, Nottingham) which is currently working happily with an SDX Index phone system. I have to replace this phone system shortly and I've been trying to get a * system working for some weeks now. I have configured the dial plan (which works)

Hi all, We're trying to hook up our Asterisk config (Card: TE410P) with a Siemens EWSD switch. The link is ok on both ends (green), with no errors. The problem is when we try to make a call from our side (via call files), we get the pri/E1 error Ext: 1 Cause: Temporary failure (41), class = Network Congestion (2) Our Telecom partner (they checked with Siemens) mentioned that we need to

I have read most of Eicons information on Q.SIG, and I am able to load the Q.SIG protocol (instead of ETSI for example). No strange logging in divacrtl mlog. But how do I tell Asterisk to understand Q.SIG? My PBX is configured for QSIG, but I cannot see anything on my trace when trying to make a call via the S0(Q.SIG) Janne > -----Ursprungligt meddelande----- > Fr?n: asterisk-users-bounces@li...

We are not having any luck with the E100p card here in Australia, it will work with a crossover cable to another device but will not talk to our Telco Telstra who probably have a weird implementation of an E1. Any suggestions on a replacement? Regards Mark McKibbin DCS Internet 64 Queen St Warragul Victoria 3820 Australia www.dcsi.net.au mark@team.dcsi.net.au Ph. 1300 665575 Fx. 1300 556595

Anyone have an example XML file for the PAP2T? Cheers, j

...cept or dial out any other call on the PSTN line. I have to manually reset it (and restart the asterisk server to get rid of the zombie SIP channel). The point is in other words how to setup the end of a call detection. I assume that the phone line I am using is set up with italian (or european / etsi) standards. How should I setup the end of call detection for this kind of pstn line? Thanks for any help, Aldo