oner asterisk
2005-Oct-12 06:52 UTC
[Asterisk-Users] X100P callerid ETSI - caller*ID failed checksum
Dear All, I am a newbie about asterisk. I have 1x X100P card 3x Sip phone I got aware of problem, after I saw the caller id on my sip phone. I noticed that if I receive a call from GSM Operator A, I can see caller id. But any other operator, I got no caller id, even my direct PSTN service operator. So at that moment I was using *1.0.9. than I changed to asterisk@home 1.3(1.0.9). I got same result. Then I connected an caller id analog phone to X100P phone port . I could see all CIDs from all operators (PSTN &GSM) I searched CID standards. Our country is using ETSI standards. But I am not sure about which method we are using ( FSK or DTMF) Then trials and patch searches and I find out some but no result, even I lost CID completely. I setup system again and again. I am using Debian 3.1and as asterisk 1- asterisk 1.0.9 with zaptel 1.0.9 2- asterisk 1.2 beta1 with zaptel 1.2.beta1 3- asterisk 1.2 betal1 with zaptel 1.0.9 4- asterisk 1.0.9 with 1.0.7 5- with CVS and with all configs my My zaptel.conf is loadzone=us defaultzone=us fxsks=1 Zapata.conf ( I played with commented parameters) [channels] signalling=fxs_ks context=incoming language=us immediate=no usecallerid=yes callerid=asreceived useincomingcalleridonzaptransfer=yes ; I tried with /without / yes /no usedistinctiveringdetection=no ; our op is not using ;cidsignalling=bell ; I tried bell, v23, dtmf ;cidstart=ring ; As I can see from my analog phone CID is coming after first ring. I tried ring and polarity musiconhold=default busydetect=no ;busycount=4 ;busypattern=500,500 ;hidecallerid=no ;callwaiting=yes ;usecallingpres=yes ;callwaitingcallerid=yes ;threewaycalling=yes ;transfer=yes ;canpark=yes cancallforward=yes ;callreturn=yes ;echocancel=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 channel=1 callgroup=1 pickupgroup=1 Error message is -- Starting simple switch on 'Zap/1-1' -- Asterisk Urgent handler callerid.c:312 callerid_feed: Caller*ID failed checksum and usually with a ":success" at the end. Which make no sense Now I am feeling like donkey but wanna solve this issue, So My Questions are: 1- What parameters I should use for ETSI in Zapata.conf and zaptel.conf 2- How Can I distinguish FSK and DMTF types ? any test method or any software to be sure ? 3- I see clidtest program but no success to compile it . do you know how ? 4- I tested indication tones also it seems okay do you think is it part of the problem? How can I solve callerid issue ???? Thanks Cheers, Oner -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051012/e4540806/attachment.htm