search for: etherexpress

...control the bandwidth usage, here are the details, 1. Our production servers are all Redhat 6.2 with Kernel 2.2.19-6.2.12, the software we use are customized specifically for RH6.2, so I can''t upgrade to 2.4 kernel. 2. On my test server with the same RH6.2 and kernel (it has a sigle Intel EtherExpress NIC), I compiled the rshaper.o module and modified the network driver (eepro100.c), make modules, install the new eepro100.o, and went through insmod rshaper then rshaperctl 192.168.1.10 10000 10 It''s a single NIC on an internal network (192.168.1.0/24) It was able to control the incomin...

Hi, as a new user to pxelinux I'm having trouble booting an Asus P55T2P4 from an Intel Etherexpress Pro card with PXE bootrom. I'm using pxelinux 2.04 (tried 2.05pre2 as well) with a Redhat 8.0 kernel (2.4.18) and ramdisk image (for pure testing purposes). The Mainboard I use is a P55T2P4, Rev. 2, newest Bios 0207, 80MB Ram, PCI VGA card and the EEPro. dhcp,tftp work fine, pxelinux loads...

This is probably more of an IPTables question but... Is there any experience with using as gateway/firewall for a larger office, with 50 or more users, mail and web server? Thanks

Folks, I'm trying to add a network interface card to my SUSE 9.3 box, and I'm not having much luck with a US Robotics version. What manufacturer do any of you use in your machines--either 10/100MB or GigE NIC? Thanks Eric Hines There is no nonsense so errant that it cannot be made the creed of the vast majority by adequate governmental action. --Bertrand Russell

...t there is nothhing wrong with the network cards or hub. also there are very few collisions. Well, here are the specs for my server system, and the client Linux server Linux 2.2.5 based on Slackware 3.6 distro PII 300 with 64 Meg RAM Buslogic SCSI controler with 7200RPM 9.1 G IBM disk Intel Etherexpress Pro + 10/100 (Intel 82557) Samba 2.0.3 Win 95 Client Win95b Celeron 300A with 64Meg RAM 7200 RPM IDE disk using standard GX chipset IDE controler 3Com 905b TX 10/100 NIC with v4.1 of the 3com drivers TCP/IP is the only protocal installed currently, although I also tried with the NETBEUI pro...

Hi. I'm running Samba 2.2.2 and Linux 2.4.7 on a dual PPro-200/256KB server. The relevant NIC is an Intel EtherExpress PRO/100+. The problem I'm having is that certain programs will swamp the server; the load will spike immediately to 50% (i.e., 100% on one CPU) and performance will, naturally, bite. Having another active connection to the server at the same time causes _monster_ slowdowns. I didn't thin...

...;ting a stack of files. I have tested (compiled from source with defaults) samba versions 3.0.10, 11, 12, 13, 14, 14a Versions prior to 3.0.13 are fine, in my environment, versions 3.0.13 and later are causing the problem. The basic data on my system is -a P4 3.2 Ghz, 512 Ram, Slakware 10, Intel Etherexpress Pro Nic. this server is very lightly loaded. -The client is a NT4 with SP6a, with a 100 day uptime habit (i.e. really reliable). It is the current file server and is backed up daily with smbclient. I had client problems with Win98 clients with samba v3.0.10,11 and 12 during this testing, b...

...erface pcib0: <ServerWorks host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib4: <PCI to PCI bridge (vendor=1166 device=0009)> at device 0.1 on pci0 pci1: <PCI bus> on pcib4 pci1: <ATI Mach64-GM graphics accelerator> at 0.0 irq 11 fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xc800-0xc83f mem 0xfe800000-0xfe8fffff,0xfeafb000-0xfeafbfff irq 7 at device 4.0 on pci0 fxp0: Ethernet address 00:30:48:10:6b:9e inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: <Adaptec ai...

intel etherexpress pro 100 nics at my lan, server with tftp, nfsserver and pxelinux running for about half a year at my lan. Hi, When I use a kernel v.2.4.20 the pxe boot loads the pxefiles, kernel and then stops asking for files from the server and complains about a "Root-NFS: No NFS server available, giving...

I've spent the past four days or so updating machines here to 4.8/9-stable via cvsup, and have done a complete make buildworld/kernel on each machine (some SMP, some single processor). It seems something is broken with the latest fxp driver, on each machine (different mobos and hardware configs) heavy network traffic with fxp NICs causes timeouts and random kernel panics. First machine to

Hi: I have a machine with four interfaces connecting four different networks. I am learning to use nmap and trying to force the nmap working only one interface. As nmap man page states, I use -e option and it would not work: nmap -e fx0 -v -sP 192.168.128.0/23 Starting Nmap 3.95 ( http://www.insecure.org/nmap/ ) at 2006-02-04 14:04 CST getinterfaces: Failed to open ethernet interface (el0)

Hi, I'm trying to build a bridge using a 486DX2/66 with two 10 Mbit Ethernet NICs. The machine (tsushima) is running Debian stable and kernel 2.4.26. Previously I used it as a router, so I know the hardware (NICs) is working. The NICs are as follows: eth0: WD80x3 at 0x280, 00 00 C0 0A 2C 2F WD8003-old, IRQ 10, shared memory at 0xd0000-0xd1fff. eth16i.c: v0.35 01-Jul-1999 Mika Kuoppala

...) SVGA controller> mem 0xd8d00000-0xd8d7ffff,0xd0000000-0xd7ffffff irq 12 at device 2.0 on pci0 agp0: detected 892k stolen memory agp0: aperture size is 128M pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 pci1: <PCI bus> on pcib1 fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xc000-0xc01f mem 0xd8800000-0xd88fffff,0xd8c00000-0xd8c00fff irq 12 at device 0.0 on pci1 fxp0: Ethernet address 00:a0:c9:e7:a6:e6 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: <Intel 82...

Hi Tom, How are u? hehehe I have a question. I have 2 pc with redhat 9.0 configured with ipsec freeswan 1.99 (vpn) and i have to tranfer file from one to the othert one. I see that ftp tranfer have a throughtput is the double than a netbios tranfer... why??? I supposed the problem is the TOS.(/etc/shorewall/tos) and i modified the file like ftp... in this method. #SOURCE DEST

...ears to operate normally. 8. Tried asterisklivecd that is maintained by somebody in Italy. Actually got a freshmaker error on that trial, though it appeared to be somewhat outdated. Just to anticipate questions, whenever the TDM04b was tested, the power connector was in fact connected. An Intel Etherexpress Pro 100 ethernet card was tested on Machine A to verify that there was no problem with the slots. The eepro100 initializes and operates perfectly. Attached to this email is a copy of the kernel's configuration, and a list of currently loaded modules is as follows: Module Siz...

...# Broadcom BCM5706/BCM5708 Gigabit Ethernet device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet device lge # Level 1 LXT1001 gigabit Ethernet device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet device nge # NatSemi DP83820...

I need to get a second ethernet card for my HP Proliant CentOS server, to attach a LinkSys WRT54GL router to. I see that there are many Realtek RTL8169S gigabit cards going for a song on eBay. Is anyone using one of these under CentOS? Do they work OK? (I used to have a couple of Realtek cards - not gigabit - and they worked fine.) Or does anyone have a strong recommendation for other cards? Any

...an't remember exactly what it is, but it is something like "TCP No Delay". No other optimisations were made. This whole simplex/duplex thing with cheap ethernet cards seems to be a common problem. It may be worth your while to invest in a top quality ethernet card, such as the Intel EtherExpress Pro 10/100 You might like to check out http://www1.tpgi.com.au/users/eirvine/hermione/hermione.html Anyhow, let me know how you get on. Eddie.

...at.Any pointers on parameters to tweak ? First upgrade will be 1280 MB mem next step might be 2 GB depending on the performance gain (if noticable).It's not that the machine is slow or anything I'd just like it to be even faster :-) Specs: Dell Poweredge 2550 1 GHz P3 1280 MB mem Intel Etherexpress Pro 10/100 NIC Internal AACRAID controller with two 18 GB 1000 rpm drives in raid mirror External PERC 3/DC Megaraid controller with two raid 5 arrays consisting of 6 36 GB 1000 rpm drives in each Debian 2.2 with kernel 2.4 updated packages kernel 2.4.13-ac5 samba 2.0.10 reason for 2.0.10 and no...

...at.Any pointers on parameters to tweak ? First upgrade will be 1280 MB mem next step might be 2 GB depending on the performance gain (if noticable).It's not that the machine is slow or anything I'd just like it to be even faster :-) Specs: Dell Poweredge 2550 1 GHz P3 1280 MB mem Intel Etherexpress Pro 10/100 NIC Internal AACRAID controller with two 18 GB 1000 rpm drives in raid mirror External PERC 3/DC Megaraid controller with two raid 5 arrays consisting of 6 36 GB 1000 rpm drives in each Debian 2.2 with kernel 2.4 updated packages kernel 2.4.13-ac5 samba 2.0.10 reason for 2.0.10 and no...