Hi all,
is there a known issue with health monitoring on supermicro SuperServer
6010H? (Im primarily interested in temeperature monitoring)
I have tried both mbmon and lmmon with the following results:
stats# mbmon -d
SMBus[ServerWorks(ServerSet Chipset)] found, but No HWM available on it!!
No Hardware Monitor found!!
InitMBInfo: Unknown error: 0
stats# lmmon
IOCTL: Operation not supported by device
This is on a fresh 4.8-STABLE, from cvs today. Running on:
http://www.supermicro.com/PRODUCT/SUPERServer/SuperServer6010H.htm
And the motherboard is "SUPER 370DER"
A complete dmesg is at the end of this message.
So does anyone have any more input? With google i have found others who
have asked similar questions, but never a clear answer if its possible to
do or not.
/Chris
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-STABLE #0: Sun May 11 14:46:24 CEST 2003
chris@tmp2.terrabee.net:/usr/src/sys/compile/CHRIS
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel Pentium III (799.62-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268369920 (262080K bytes)
avail memory = 255750144 (249756K bytes)
Preloaded elf kernel "kernel" at 0xc0541000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00f5380
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib4: <PCI to PCI bridge (vendor=1166 device=0009)> at device 0.1 on pci0
pci1: <PCI bus> on pcib4
pci1: <ATI Mach64-GM graphics accelerator> at 0.0 irq 11
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port
0xc800-0xc83f mem 0xfe800000-0xfe8fffff,0xfeafb000-0xfeafbfff irq 7 at
device 4.0 on pci0
fxp0: Ethernet address 00:30:48:10:6b:9e
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd000-0xd0ff mem
0xfeafc000-0xfeafcfff irq 5 at device 5.0 on pci0
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem
0xfeaff000-0xfeafffff irq 10 at device 5.1 on pci0
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
fxp1: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port
0xd400-0xd43f mem 0xfe900000-0xfe9fffff,0xfeafd000-0xfeafdfff irq 9 at
device 6.0 on pci0
fxp1: Ethernet address 00:30:48:10:6b:9d
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0xffa0-0xffaf at device
15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ohci0: <OHCI (generic) USB controller> irq 0 at device 15.2 on pci0
ohci0: Could not map memory
device_probe_and_attach: ohci0 attach returned 6
pcib1: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
pcib2: <ServerWorks host to PCI bridge> on motherboard
pci3: <PCI bus> on pcib2
pcib3: <ServerWorks host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib3
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcefff,0xcf000-0xcffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port not found.
pcf0: can't reserve irq, polled mode.
pcf0: <PCF8584 I2C bus controller> at port 0x320-0x321 irq 5 on isa0
iicbus0: <Philips I2C bus> on pcf0 addr 0xaa
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus0: <System Management Bus> on iicsmb0
smb0: <SMBus general purpose I/O> on smbus0
iic0: <I2C general purpose I/O> on iicbus0
acd0: CDROM <MATSHITA CR-176> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da1 at ahc1 bus 0 target 0 lun 0
da1: <transtec > Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing
Enabled
da1: 293210MB (600494080 512 byte sectors: 255H 63S/T 37379C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST39236LC 0010> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da0: 8761MB (17942584 512 byte sectors: 255H 63S/T 1116C)
