search for: divactrl

...drivers. If have checked both with and withoud early B3 connects dial option but the problems are the same. The relevant parts of my capi.conf, dial command used and kernel config are at the end. I am using asterisk-1.0.7; vanilla kernel-2.6.10 or 2.6.12 compiled with gcc 3.4 in Mandrake 10.1, divactrl 2.0 from Melware, chan-capi 0.3.5 (with deadlock cvs-HEAD patch from levigo.de adapted to asterisk 1.0.*) and (here is my main suspect) system isdn/capi libs/tools (libisdn4k-utils2-3.2p3-16mdk - isdn4k-utils-3.2p3-16mdk) from Mandrake 10.1. What is the best isdn libs version for using with cha...

Hi, > > The error "/usr/lib/divas/divactrl load -c 1 -Debug" produces > > complains about the missing protocol image > > A: can't open protocol image: (/usr/lib/divas/te_etsi.2q0) > It is not necessary any more to download any firmware files > (they are incompatible anyway). All needed files are part of >...

Hi; I've got an AAH installation where a customer wants to install an active Eicon DIVA BRI card. AAH is built on Centos 3.5 which is currently at kernel 2.4.21.37. Support for Eicon active cards is built-in. I've debugged and run the A@H install-Eicondiva script but when I try to run divactrl load -c 1 -f ETSI -Debug I get a response : A: can't get card type for DIVA adapter number 1 dmesg reveals that lincfg.c has reported the error : DIVA Server Driver - initialising DIVA Server Driver - Version 2.0.16 Divas: DIVA Server BRI (U) Found Divas: DIVA I/O Base already in use 0xf1000...

Hi (Armin?) ! Today I had a problem with Diva Server 4BRI-8M 2.0. Asterisk 1.2.12.1 chan_capi-cm-0.6.5 divas4linux-melware-3.0.f-106.622-1 Asterisk could not receive and make calls on the BRI ports, although the ports looked fine within Asterisk. I usually use "/usr/lib/divas/divactrl dchannel -c 1" to test line activity. This time there was no activity (cryptic log messages) (I waited for 10 minutes). Then I restarted Asterisk - but no improvement. Then I wanted to remove and reload the diva kernel modules, but /usr/lib/divas/divas_stop.rc could not remove the modules....

Hello! I finally found a working solution. calling divactrl with the parameter -n [0..20] gives the DID-length means, if you wanna have 123-XXX in digit-wise mode, then call divactrl load -c 1 -n 3 -f ETSI and the card will wait for n digits. regards, Sebastian -----Urspr?ngliche Nachricht----- Von: asterisk-users-bounces@lists.digium.com [mailto:as...

...in NT mode and work with asterisk+chan_capi? I know they probably work fine with mutliHFC cards with either bristuff of chan_misdn but since I have some spare Divas, I was curious about their potential as phone ports. The Diva's 3 and 4 ports are already set to NT mode at boot time: /sbin/divactrl load -SeparateConfig -c 1 -f ETSI -f1 ETSI -f2 ETSI -u2 -x2 -f3 ETSI -u3 -x3 And I think the capi.conf (using Armin's 0.6.1 version) looks OK: [DIVA2] ntmode=yes isdnmode=ptp incomingmsn=* controller=4 group=3 accountcode=diva context=international echosquelch=0 echocancel=no devic...

Hi! I have problems with the ToN configurations in chan_capi-cm. I understand how incoming calls are rewritten using national and international prefix. But for outgoing calls - what is the ToN? Further, is there any debug info of the Ton? "capi debug" and the divactrl dchannel both show the CLI and CDLI, but do not show the ToN. How can I set the ToN? I suspect chan_capi to use the received ToN also for outgoing calls when bridging calls. How can I verify this? thanks Klaus

...ard running under Ubuntu 6.06 - by downloading the v3 driver package from Melware and compiling everything. Yet, after activating the necessary modules (divas and divadidd) and interactively configuring the card (/usr/lib/divas/Config), starting up the adapter fails! The error "/usr/lib/divas/divactrl load -c 1 -Debug" produces complains about the missing protocol image A: can't open protocol image: (/usr/lib/divas/te_etsi.2q0) I know from version 2.0 that you had to download these images from either isdn4linux.org or melware.de, yet none of them still have the files available. /usr/...

asterisk-users-request@lists.digium.com is believed to have said: >chan_capi does not set the NT-mode. Your cards driver need to do that. >E.g. for Eicon DIVA Server cards, you just set the '-x' option with divactrl >or set NT-mode in the config wizard. >chan_capi does not (need) to know anything about what protocol the card is >doing. CAPI is independent here. Ok. >Anyway, if the card is set to NT mode, you should specify ntmode=yes >in the capi.conf to tell chan_capi to handle the progress...

...23-0 where 123 is head number). it will wait for exactly two digits before answering (at least in the last version of the firmware and chan_capi i tried). regards, Am Freitag, 6. Mai 2005 15:17 schrieb Sebastian Buntin: > Hello! > > I finally found a working solution. > calling > divactrl with the parameter -n [0..20] gives the DID-length > means, if you wanna have 123-XXX in digit-wise mode, then call > > divactrl load -c 1 -n 3 -f ETSI > > and the card will wait for n digits. > > > regards, > Sebastian > > > -----Urspr?ngliche Nachricht----- &g...

Hi (Armin)! Does someone knows how to identify the type of the card? The delivery note says it is a V-4BRI-8M, whereas lspci reports a 4BRI-8M. What is it really? Are there any Eicon tools to identify the card type? thanks klaus 0000:0a:03.0 Network controller: Eicon Networks Corporation Diva Server 4BRI-8M Rev 2 (rev 01) Subsystem: Eicon Networks Corporation Diva Server 4BRI-8M Rev

Hi Everybody, Has anybody tried the above (or indeed any other 4XBRI cards) successfully with Asterisk. As far as I can see the above mentioned card is an active ISDN card but supported by it's own I4L driver. This leads to interesting questions particularly regarding echo cancellations (which usually doesn't work on the cheap passive cards with one exception as far as I can see).

Hello, I have an issue getting the chan_capi module to load in asterisk cvs from today. Plain 2.4.20 kernel with melware patches for the Eicon Diva Server Bri card. I load the modules with: modprobe -v divas divacapi I load the firmware with: divactrl load -c 1 -f ETSI -vd6 Output in /var/log/messages is: Nov 9 19:26:26 voice kernel: Eicon DIVA - DIDD table (http://www.melware.net) Nov 9 19:26:26 voice kernel: divadidd: Rel:2.0 Rev:1.13 Build:102-51(local) Nov 9 19:26:26 voice kernel: Eicon DIVA Server driver (http://www.melware.net) Nov...

...always happens via the CAPI interfaces. - For the Asterisk part I have the choice of chan_misdn or chan_capi(-cm). After reading I come to the conclusion that chan_capi(-cm) should work better. - For the hardware part there are also 2 choices. Either use the Eicon drivers included in 2.6 and divactrl or use the source packages from eicon and the tools included. Here I'm not sure which method is better. Further I do not know how this is related with isdn4linux or other linux ISDN stuff. From: http://www.eicon.com/support/helpweb/slnxen/asterisk.asp 1. "Ensure that you do not have th...

Ok I know this may have been covered and I did have a look back in the archives but didn't find anthing so I am asking it now.. Many moons ago the MySQL CDR functions and MySQL Voicemail functions had to be removed from the main asterisk code because of licensing issues.. Now there is new MySQL stuff like MySQL FRIENDS for SIP and IAX definitions.. So how is it that these options

For those that are using chan_capi in the US, how do you have your line provisioned (ordering code)? Are you using CACH EKTS? thanks! --Justin

...clicking sometimes sounds like crosstalk between both lines. After talking on irc with chan_capi's developper (kapejod) it seems the problem might originate from the Diva card. We are using a vanilla 2.6.7 kernel on debian unstable. We recently updated to use the very latest Diva firwmare and divactrl-2.1 without any effect on the problem. I suspect the problem might be related to the Diva 4BRI drivers in kernel 2.6.x as the problem seems to have started when switching from 2.4.x. Has someone had a similar experience? Is there any solution? Thanks in advance for your insight, -- Jesus is com...

Hi I have installed 2 x Eicon BRI ISDN cards into a Suse 9.2 server. We can use all 4 lines for out going calls fine, but on incoming we can only use 2. On calling in using the main msn, the 3rd line gives a an engaged signal. I have unplugged 1 of the cards, and the other card takes the 2 calls. I then swapped this around, and this also works fine. But when using both cards, we can only use

asterisk-users-request@lists.digium.com is believed to have said: >> While we are at the subject another couple of simple related question. >> >> Are HFC-S cards active? I got one for a very low price, so that I >> imagine it will be NOT the case... > >No, these cards are passive. The protocol handling must be done by >the hosts CPU / driver. OK; price

Hello All, Has anyone configured bri to answer for only one msn? In essence, when the primary is busy I want to have channel 2 ring. I am using an eicon diva server bri I know I saw it in the windows interface, but don't see it in the linux setup. Regards, Greg