search for: ddddd

...ersion (subversion trunk). For more info on getting and compiling the development release: http://buildbot.ghz.cc/~buildbot/docs/r2003-144/website/download.html Note that you don't need to install nut ; simply running from the build directory is sufficient, using: $ sudo ./drivers/megatec_usb -DDDDD -a <upsname> you might also give a try to blazer_usb, which will replace megatec* $ sudo /lib/nut/blazer_usb -DDDDD -a <upsname> and/or $ sudo ./drivers/blazer_usb -DDDDD -a <upsname> cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://www.eaton.com/mgeops Network UP...

Has anyone gotten this model of tripp-lite to work? sudo /usr/local/bin/upsdrvctl -DDDDD -u root start Network UPS Tools - UPS driver controller 2.0.5 Starting UPS: tripplite exec: /usr/local/bin/tripplite_usb -a tripplite Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.7 (2.0.5) Warning: This is an experimental driver. Some features may not function correctly. Detected a...

...I can't think of what else could be different with the boot-time failure versus the manual startup after logging in. I'll include my configuration at the end of this note. Here's the log of the boot failure: Sun Apr 15 21:49:48 PDT 2007 /etc/init.d/rc3.d/S09ups: Starting ups driver (-DDDDD) Sun Apr 15 21:49:48 PDT 2007 /etc/init.d/rc3.d/S09ups: USB filesystem is mounted Starting UPS: ups exec: //bin/newhidups -a ups Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.0.5) No matching HID UPS found Driver failed to start (exit status=1) Network UPS Tools - UPS driver...

Hi I try since a week to run my MGE Protection Center under Suse Linux 9.3. At the MGE site i found an HowTo. I have installed NUT an create the=20 configs but at boot the newhidups driver say=B4s "no USB/HID UPS found".=20= Anyone an Idea? Johannes Schatz=

Hello, looking for replacements for some older Powerware equipment I found the MGE Pulsar Extreme 1000C and I'm currently testing one with nut-2.0.3 on a self-brewn i386-linux. Upto now everything seems to work fine - except I can't get the power outlets switching on again after mains returns. As this works with Personal Solution-Pac 2 on W2k I thought that there might be a way to

...class = "factor"), Char2 = structure(c(1L, 2L, 1L, 2L, 3L, 4L, 4L, 2L), .Label = c("ABCD", "EFGH", "FGHJ", "GGGG"), class = "factor"), Char3 = structure(c(1L, 1L, 2L, 3L, 1L, 1L, 2L, 3L), .Label = c("ASDFG", "DDDDD", "EEEEEE"), class = "factor")), .Names = c("Coutry", "State", "City", "Char1", "Char2", "Char3"), row.names = c(NA, -8L), class = "data.frame") Question: I am trying to create a pivot table which...

Hi everyone, I just want to know about driver support over new APC smart models. My company recently bought a Smart-Ups RT model: SURT3000XLI and a I cannot do to make work it with last version of nut software. Maybe this model it doesn?t supported yet and I want to know if so. The diference with others models like matrix or backup ones is the famous Smart Cable: 940-1525A (utp - db9). I

Hi everyone, I just want to know about driver support over new APC smart models. My company recently bought a Smart-Ups RT model: SURT3000XLI and a I cannot do to make work it with last version of nut software. Maybe this model it doesn?t supported yet and I want to know if so. The diference with others models like matrix or backup ones is the famous Smart Cable: 940-1525A (utp - db9). I

...t=01 Port=02 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0001 ProdID=0000 Rev=01.00 S: Product=MEC0003 C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=03(HID ) Sub=00 Prot=00 Driver=(none) * Test using nutdrv_qx -DDDDD in nutdrv_qx.log (attached). * Test using blazer_usb -DDDDD in blazer_usb.log (attached). * Capture of successful communications with the UPS using the application downloaded from the vendor's site in hunnox2.pcap (attached). -------------- next part -------------- A non-text attachment was...

...? battery.date: 2001/09/25 battery.mfr.date: 2016/05/11 ups.mfr.date: 2012/01/30 The next test involves stopping NUT, and briefly running the driver in debug mode. The commands will be something like this (run in a shell as root): upsdrvctl stop /usr/local/libexec/nut/usbhid-ups -a APC_BR1500GI -DDDDD 2>&1 | tee /tmp/APC_BR1500GI.debug.txt # let it run for ~20 seconds, then stop with Control-C upsdrvctl start and then please post the contents of /tmp/APC_BR1500GI.debug.txt (pastebin works, but if you do email it to the list, please use gzip first) If the debug log looks like it ended on...

...er /dev/usb0: addr 2: low speed, self powered, config 1, Back-UPS CS 500 FW:808.q5.I USB FW:q5(0x0002), American Power Conversion(0x051d), rev 0.06 uhid0 Controller /dev/usb1: Controller /dev/usb2: Controller /dev/usb3: *** HERE IS THE PROBLEM root.srv# /usr/local/libexec/nut/newhidups -u root -DDDDD auto Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3) debug level is '5' No appropriate HID device found No matching USB/HID UPS found root.srv# /usr/local/libexec/nut/newhidups -a myups -u root -DDDDD /dev/uhid0 Network UPS Tools: New USB/HID UPS driver 0.28 (2.0.3) debug level is...

Hello, I have a Yunto e a Zanto ups connected with usb with id 06da:0002 and 06da:0601. I have seen that people had some success using megatec driver. But now megatec is replaced by blazer-usb and I am not able to use my upses under nut. Can you help me? Thanks! Mario

...tinc/test4/hosts/HostA and .../HostB are the same [HostB]#insmod ethertap0 -o "ethertap0" unit="0" [HostB]#ifconfig tap0 hw ether fe:fd:00:00:00:00 [HostB]#ifconfig tap0 10.100.9.223 netmask 255.255.255.0 broadcast 10.100.9.255 [HostB]#ifconfig tap0 -arp [HostB]#tincd -n test4 -ddddd [HostB]#tail -f /var/log/messages | grep tinc HostB tinc.test4[11629]: tincd 1.0pre5 starting HostB tinc.test4[11629]: /dev/tap0 is a Linux ethertap device HostB tinc.test4[11629]: Ready: listening on port 8195 [HostA]#tincd -n test4 -ddddd [HostA]#ifconfig test4 hw ether fe:fd:...

...nut supporting my model, or if it is a larger problem with my installation (hopefully the latter). Any help would be appreciated. Thanks. In the following outputs, I deleted the entries for the USB controller and USB hubs in the interest of space. "sudo /lib/nut/tripplite_usb -u root -DDDDD auto Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.3) Warning: This is an experimental driver. Some features may not function correctly. ... Checking device (045E/0039) (005/004) - VendorID: 045e - ProductID: 0039 - Manufacturer: Microsoft - Product: Microsoft 5-Button Mouse wi...

...gt; #lsusb -vvv -d 0001:0000 > > (see attached lsusb.log) > > > > Content of ups.conf: > > [ups] > driver=nutdrv_qx > protocol=megatec > subdriver=fuji > port=auto > vendorid=0001 > productid=0000 > > > #/usr/local/ups/bin$ sudo ./nutdrv_qx -a ups -DDDDD > (see attached log.log) > - I have tried to pull the plug > - reinsert / reconnect it (220V) > - poweroff the UPS (by button) > - and power on (by button) > > #/usr/local/ups/sbin$ sudo ./upsdrvctl start > Network UPS Tools - UPS driver controller 2.7.2.5 > Network UPS T...

--- Arjen de Korte <nut+users at de-korte.org> wrote: > > > I also did: > > > > # ./megatec_usb -DDDDD -x vendor=06da -x mfr=OMRON > > /dev/usb/hiddev0 > > Please have a look at 'man 8 megatec_usb' again. > > You probably need to specify the '-x vendorid' and > '-x productid' options > and most likely, the 'subdriver' as well. I think > the...

--- Arjen de Korte <nut+users at de-korte.org> wrote: > > > I also did: > > > > # ./megatec_usb -DDDDD -x vendor=06da -x mfr=OMRON > > /dev/usb/hiddev0 > > Please have a look at 'man 8 megatec_usb' again. > > You probably need to specify the '-x vendorid' and > '-x productid' options > and most likely, the 'subdriver' as well. I think > the...

...ort to the NUT list ;-) code changes are also better using patch (ie diff against the original code). so I've generated one, attached. that being said, you should give a try to blazer_usb, the successor of the megatec_usb driver. we will be interested in a debug output (ie /path/to/blazer_usb -DDDDD -a <upsname> along with the output of "lsusb -v" excerpt of your device. now, since I don't know much about these drivers, I'll let Arjen comment on the patch itself. cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://www.eaton.com/mgeops Network UPS Tools (NU...

DDDDD output attached. On 04/12/12 19:53, Arnaud Quette wrote: > > > 2012/4/11 Robert Ayrapetyan <robert.ayrapetyan at gmail.com > <mailto:robert.ayrapetyan at gmail.com>> > > Seems I've missed confirmation mail somewhere, now registered. > > > > ha...

...ONITOR munja at localhost 1 monuser ###### slave MINSUPPLIES 1 SHUTDOWNCMD "/sbin/shutdown -h +0" NOTIFYCMD /usr/local/ups/bin/notifyme POLLFREQ 5 POLLFREQALERT 5 HOSTSYNC 15 DEADTIME 15 POWERDOWNFLAG /etc/killpower RBWARNTIME 43200 NOCOMMWARNTIME 300 FINALDELAY 5 /lib64/nut/blazer_ser -DDDDD -a munja -i 10 Network UPS Tools - Megatec/Q1 protocol serial driver 1.51 (2.6.0) 0.000000 send_to_all: SETINFO driver.parameter.port "/dev/ttyS0" 0.000051 debug level is '5' 0.100836 send_to_all: SETINFO device.type "ups" 0.100860 send_to_all...