Hello, I have an UPS Hunnox HNX-650 (http://www.hunnox.com/), but it's not quite running yet with NUT. Any hints? Thanks... Some info: * lsusb: Bus 005 Device 003: ID 0001:0000 Fry's Electronics * usb-devices: T: Bus=05 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0001 ProdID=0000 Rev=01.00 S: Product=MEC0003 C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=03(HID ) Sub=00 Prot=00 Driver=(none) * Test using nutdrv_qx -DDDDD in nutdrv_qx.log (attached). * Test using blazer_usb -DDDDD in blazer_usb.log (attached). * Capture of successful communications with the UPS using the application downloaded from the vendor's site in hunnox2.pcap (attached). -------------- next part -------------- A non-text attachment was scrubbed... Name: blazer_usb.log Type: text/x-log Size: 5971 bytes Desc: not available URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20180305/3533dcce/attachment-0002.bin> -------------- next part -------------- A non-text attachment was scrubbed... Name: hunnox2.pcap Type: application/vnd.tcpdump.pcap Size: 4656 bytes Desc: not available URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20180305/3533dcce/attachment-0001.pcap> -------------- next part -------------- A non-text attachment was scrubbed... Name: nutdrv_qx.log Type: text/x-log Size: 16390 bytes Desc: not available URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20180305/3533dcce/attachment-0003.bin>
2018-03-05 12:56 GMT+01:00 Mario R. Carro <mcarro at threads-srl.com.ar>:> Hello, I have an UPS Hunnox HNX-650 (http://www.hunnox.com/), but it's not > quite running yet with NUT. Any hints? Thanks...I can't open the pcap right now, but, looking at the logs, it seems that we're speaking the right dialect and using the right (or an almost right) serial-over-USB implementation: it could be that we're missing some sort of initialization (maybe a command or some specific USB call).> > Some info: > > * lsusb: > > Bus 005 Device 003: ID 0001:0000 Fry's Electronics > > * usb-devices: > > T: Bus=05 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0 > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0001 ProdID=0000 Rev=01.00 > S: Product=MEC0003 > C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=03(HID ) Sub=00 Prot=00 Driver=(none) > > * Test using nutdrv_qx -DDDDD in nutdrv_qx.log (attached). > > * Test using blazer_usb -DDDDD in blazer_usb.log (attached). > > * Capture of successful communications with the UPS using the application > downloaded from the vendor's site in hunnox2.pcap (attached). > > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser at lists.alioth.debian.org > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser