search for: dchannels

Hi: I'm using a te110p E1 card in Spain. There is way to change the dchan channel number? Here in Spain there is a voice company that works with dchannel in channel number 31. I must to set channels from 1 to 30 and dchan to 31 but when asterisk loads the chan_zap.c it says that channel 16 is reserve for dchan. Can you help me? Cheers. -- Jos? Luis Garc?a Ext. Pineda 2002001 Ext.

We have install a DS3 with 28 DS1's we have an Adtran MUX breaking out the DS1's, we are trying to setup the system with 2 dchannels for each 4 DS1's. Everything looks fine when modprobe zaptel and wct4xxp and ztcfg -vvvvvv but when I asterisk asterisk it says: Aug 10 16:33:32 ERROR[8954]: chan_zap.c:6750 mkintf: Channel 24 is reserved for D-channel. Aug 10 16:33:32 ERROR[8954]: chan_zap.c:9990 setup_zap: Unable to regi...

I just started getting this error and its preventing me from having any incomming calls: chan_zap.c:7542 pri_dchannel: Ring requested on channel 0/2 already in use on span 1. Hanging up owner. PRI has been working fine. I didn't know anything was wrong until someone came and said their DID wasn't working. You call their DID, asterisk shows the message above and you get fast busy. But I

I just started getting this error today (I've gotten this error befor) and its preventing me from having any incoming calls: chan_zap.c:7542 pri_dchannel: Ring requested on channel 0/2 already in use on span 1. Hanging up owner. PRI has been working fine. I didn't know anything was wrong until someone came and said their DID wasn't working. You call their DID, asterisk shows the

How can we set the CDR Master file to rollover at say 30 Meg and create a new one -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100827/2e98385f/attachment.htm

I've been going back and forth with my telco for several days, trying different configurations to get a new PRI to come up. The bchannels are all up and the T1 is not in alarm status. The dchannel refuses to come up however. We've tried ni2, qsig, and now dms100 for the switchtype. The telco tech I've been working with says that he's been sending "reset all channels"

Hello Armin, > The card is telling: > > CAPI INFO 0x34a2: No circuit / channel available > > so the other channel must be in use by something else. > Maybe another device on the ISDN line? > I have tested it several times now and always entered "capi info" before and after the call. The answer was always: Contr1: 2 B channels total, 2 B channels free. I'm

We have integrated an Asterisk (TE110P) and a Mitel SX200. We usually get over 500 frame errors and over a 500 slip errors per hour. When the errors reach 1000 per hour the Mitel will take it's T1 card offline. At that point no calls can be routed from the Asterisk server to the Mitel and the TE110P reports a Yellow alarm. What can be causing all these Frame and Slip errors? We have been

Can anyone describe the asterisk implementation of this any better than the sample config files do? from zapata.conf ; Trunk groups are used for NFAS or GR-303 connections. ; ; Group: Defines a trunk group. ; group => <trunkgroup>,<dchannel>[,<backup1>...] ; ; trunkgroup is the numerical trunk group to create ; dchannel is the zap channel which will

Today we have been having some problems with the dchannel of out T1's. I was wondering if there is a way for asterisk to send out an email or page whenan error occurs. Not I know errors happen quite offen for many reasons, but I would like an email sent when there is a TI problem, or specefic other problems. I am using the safe_asterisk to run asterisk and it sends an email when asterisk

Hi guys, Currently I just purchased the TE205P for the installation of my ISDN30 setup. I compiled, setup the card correctly I think. When I do the ztcfg -vvv it shows all 31 channels clear, with 30 bchannels using for voice ranging from 1-15, 17-31, and 16 is the dchannel. However, when I do a cat /proc/zaptel/1 I see only 24 channels configured, and then, when I do a cat /proc/zaptel/2 I see

Hi! I have problems with the ToN configurations in chan_capi-cm. I understand how incoming calls are rewritten using national and international prefix. But for outgoing calls - what is the ToN? Further, is there any debug info of the Ton? "capi debug" and the divactrl dchannel both show the CLI and CDLI, but do not show the ToN. How can I set the ToN? I suspect chan_capi to use the

Hii all I bought te110p card. I configured zaptel.com ; span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 and zapata.conf is; switchtype=euroisdn signalling=pri_net group=1 context=nortel dchannel => 16 channel => 1-15,17-31 I receving the following error on my gentoo; May 18 13:48:44 WARNING[8755]: Ignoring canpark May 18 13:48:44 WARNING[8755]: Ignoring dchannel May 18 13:48:44

Hi (Armin?) ! Today I had a problem with Diva Server 4BRI-8M 2.0. Asterisk 1.2.12.1 chan_capi-cm-0.6.5 divas4linux-melware-3.0.f-106.622-1 Asterisk could not receive and make calls on the BRI ports, although the ports looked fine within Asterisk. I usually use "/usr/lib/divas/divactrl dchannel -c 1" to test line activity. This time there was no activity (cryptic log

I've read as much as I can on this error and still can't seem to figure out what's causing this error: Jun 23 20:54:58 NOTICE[7483]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Jun 23 20:55:03 NOTICE[7483]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Jun 23 20:55:03 NOTICE[7483]:

Hi all, So, we reverted the LibPRI version and tested it, and then tried with the latest version of everything. Still no changes. The BRI line is in PTMP. If we set the configs to PTMP in the genconf_parameters and try it, we get the following: [Jan 21 17:32:20] ERROR[20341]: chan_dahdi.c:12645 dahdi_pri_error: Unable to receive TEI from network! If we set it to PTP (which it is not) we

Hi I have problem with TE121 Digium card. I connected it to modem keymile Music 200 (provided by telco) but I can see 2 red lights on modem (both bellow words rx) and my card is red too. I tried to make experiment and made loopback (pins 1 4 , 2 5) and put it in card and card become green (I hope that is sign card is ok) but on CLI i can see following error message WARNING: We think we are cpe but

I have been messing with Asterisk for months and got it working well with a SIP connection, but this is the first time I have set it up with TDM cards. The cards are configured, working and the T-1's (configured for PRI/DCHAN) and I can even call into it if I add the DNIS as an extension to default context. That is the oddity. I can find nowhere in the documentation that says anything about

Can anyone explain to me the difference in zaptel.conf and zapata.conf? I'm trying to get a real clear understanding of them but its getting a little murky in places. I will be setting up a PBX running asterisk with 2 T100P cards. I will be bringing a 23 channel PRI into one card and connecting the other card to a Nortell 24 channel FXS channel bank. As I understand it zapata.conf is

We've been trying unsuccessfully to connect our Meridian Option 81C to a TE110P via PRI. We've followed the directions in asterisk-meridian-a1.pdf (link on http://www.voip-info.org/wiki/view/Asterisk+legacy+integration), but it doesn't seem to work on our 81C (even though many, many users report it works very well on Option 11's). Has anyone had any success in getting the above