search for: channels

...: Clear channel (Default) (Slaves: 119) Channel 120: Clear channel (Default) (Slaves: 120) Channel 121: Clear channel (Default) (Slaves: 121) Channel 122: Clear channel (Default) (Slaves: 122) Channel 123: Clear channel (Default) (Slaves: 123) Channel 124: Clear channel (Default) (Slaves: 124) 124 channels configured. But zttool shows me RED alarms to all the spans. Thanks in advance -- Best Regards Alexander Olekhnovich -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070503/01d22d02/attachment-0001.htm

...) Card 0 Span 2" span=2,2,0,ccs,hdb3,crc4 # termtype: te bchan=32-46,48-62 dchan=47 # Global data loadzone = es defaultzone = es #################################################### /etc/asterisk/zapata.conf ; Autogenerated by /usr/sbin/genzaptelconf -- do not hand edit ; Zaptel Channels Configurations (zapata.conf) ; ; This is not intended to be a complete zapata.conf. Rather, it is intended ; to be #include-d by /etc/zapata.conf that will include the global settings ; [channels] ; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" language=es context=default switchtype=euroisd...

...7: Clear channel (Default) (Slaves: 117) Channel 118: Clear channel (Default) (Slaves: 118) Channel 119: Clear channel (Default) (Slaves: 119) Channel 120: Clear channel (Default) (Slaves: 120) Channel 121: Clear channel (Default) (Slaves: 121) Channel 122: Clear channel (Default) (Slaves: 122) 120 channels to configure. DAHDI_SPANCONFIG failed on span 1: No such device or address (6) dahdi: Telephony Interface Registered on major 196 dahdi: Version: 2.0.0 ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 21 (level, low) -> IRQ 21 Detected Tormenta 2 Quad E1/PRA - E400P at 0xdddff000/0xdddfe800 irq 2...

...nel 27: Individual Clear channel (Default) (Slaves: 27) Channel 28: Individual Clear channel (Default) (Slaves: 28) Channel 29: Individual Clear channel (Default) (Slaves: 29) Channel 30: Individual Clear channel (Default) (Slaves: 30) Channel 31: Individual Clear channel (Default) (Slaves: 31) 31 channels configured. ZT_SPANCONFIG failed on span 1: No such device or address (6) Any ideas? -- Alfredo Sola ASP5-RIPE

...fault) (Echo Canceler: mg2) (Slaves: 20) Channel 21: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 21) Channel 22: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 22) Channel 23: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 23) Channel 24: D-channel (Default) (Slaves: 24) 24 channels to configure. DAHDI_SPANCONFIG failed on span 1: Invalid argument (22) How can i set a working E1. Any examples will welcome..

Hello I just updated the kernel, dahdi-linux and dahdi-tools Im also using now asterisk 1.4.26.1 And im still with a red light (not RED/YELLOW anymore): [root at catumbela ~]# /etc/rc.d/init.d/dahdi status ### Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/ RED 1 PRI CAS RED 2 PRI CAS RED 3 PRI CAS RED 4 PRI

Hi all, I am running asterisk 1.2.18, zaptel 1.2.18, libpri 1.2.4. on a suse 10.2, running kernel 2.6.18.2-34-default. The zaptel drivers are loaded on boot via /etc/init.d/zaptel, but Asterisk is unable to start. It ends with the following message: [chan_zap.so] => (Zapata Telephony w/PRI) Jun 13 13:05:41 VERBOSE[3356] logger.c: == Parsing '/etc/asterisk/zapata.conf': Found

...he first time or 2, then I get busy signals. A friend recommended I clear out the zapata and zaptel, start over, and recreate my wanpipe stuff. He thought the problem was with the spans themselves. However, when I use the following information, and restart wanrouter, I get an error. Zapata.conf [channels] language=en context=internal switchtype=national pridialplan=unknown signalling=pri_cpe faxdetect=incoming usecallerid=yes echocancel=yes echocancelwhenbridged=yes group=0 channel => 1-23 group=1 signalling=em_w channel => 25-47 Zaptel.conf span=1,1,0,esf,b8zs span=2,1,0,esf,b8zs bchan=...

Hi, I've just got a TE110P card and installed at Asterisk. I configured zapata.conf, according to www.digium.com/index.php?menu=configuration, but the following error is happening: ... ... ... [chan_phone.so] => (Linux Telephony API Support) == Parsing '/etc/asterisk/phone.conf': Found == Registered channel type 'Phone' (Standard Linux Telephony API Driver)

Im trying to install and configure sangoma ... every thing is OK but when type the command "wanrouter start" the following error apears: wan Driver not found. Thanks for any help

Hi anyone have a idea for debug my digium TE405P card ? My zaptel.conf: span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone = fr defaultzone = fr My Zapata.conf: [channels] language=fr context=from-E1 switchtype = euroisdn pridialplan = unknown signalling = pri_cpe usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes echocancel=yes immediate=no amaflags=documentation musiconhold=default group=1...

...: 18) Channel 19: Clear channel (Default) (Slaves: 19) Channel 20: Clear channel (Default) (Slaves: 20) Channel 21: Clear channel (Default) (Slaves: 21) Channel 22: Clear channel (Default) (Slaves: 22) Channel 23: Clear channel (Default) (Slaves: 23) Channel 24: D-channel (Default) (Slaves: 24) 24 channels to configure. When I attempt a call I get -- Attempting call on DAHDI/g1/913175068012 for application Playback(demo-congrats) (Retry 1) -- Requested transfer capability: 0x00 - SPEECH -- Channel 0/1, span 1 got hangup, cause 1 -- Hungup 'DAHDI/1-1' My system.conf files...

...nel 27: Individual Clear channel (Default) (Slaves: 27) Channel 28: Individual Clear channel (Default) (Slaves: 28) Channel 29: Individual Clear channel (Default) (Slaves: 29) Channel 30: Individual Clear channel (Default) (Slaves: 30) Channel 31: Individual Clear channel (Default) (Slaves: 31) 31 channels configured. With cable plugged in, the led are turned off. What's wrong? Ciro La Ferrara

Hello list, today I experienced the following for the first time : [Jan 14 11:26:18] DEBUG[27654] channel.c: Avoiding deadlock for channel '0x114af2c0' [Jan 14 11:26:18] DEBUG[27654] channel.c: Avoiding deadlock for channel '0x114af2c0' [Jan 14 11:26:18] DEBUG[27654] channel.c: Avoiding deadlock for channel '0x114af2c0' [Jan 14 11:26:18] DEBUG[27654] channel.c:

...s card with a HARDWARE echo cancellation module. All <br> this is housed on a CentOS 5.5 box, 2.6.18 Kernel. My incoming phone <br> service is an AT&T PRI (24 channel T1). <br> <br> My configs: <br> <br> ********chan_dahdi.conf********* <br> <br> [channels]<br> ; configuration for T1 card as PRI<br> language = en<br> <br> group = 1<br> echocancel = yes<br> echotraining = yes<br> signalling = pri_cpe<br> switchtype = 4ess<br> usecallerid = yes<br> context = incoming<br> channel => 1-...

...ll not working. -- dahdi_genconf -vvv Default parameters from /etc/dahdi/genconf_parameters Generating /etc/dahdi/assigned-spans.conf cut: '/sys/bus/dahdi_devices/devices/pci:0000:01:00.0/spantype': No such file or directory Generating /etc/dahdi/system.conf Generating /etc/asterisk/dahdi-channels.conf --dahdi_cfg -vvv DAHDI Tools Version - 3.1.0 DAHDI Version: 3.1.0 Echo Canceller(s): HWEC Configuration ====================== SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: Clear cha...

Can I have a TDM400 and a T100P in the same machine? I am using AAH and trying to combine two boxes. If so, can anyone tell me the proper config for zaptel.conf and zapata.conf? Thanks! Wiley -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051006/061d9d84/attachment.htm

Hello my friends We are having seriously problems with our asterisk server, our versions are as follows: WANPIPE Release: 3.4.7 Asterisk 1.4.21.2 Zaptel Version: 1.4.11 libpri version: 1.4.10.2 The symptoms are very weird, the CLI stop working suddenly, a core show channels shows MANY channels FREEZED, the incoming and outgoing calls stop working, the internal calls stop working, in resume we have to kill the asterisk process and restart asterisk again in order to have asterisk working good again I'm remote, all my work is done using ssh; i read in google and may...

...he first time or 2, then I get busy signals. A friend recommended I clear out the zapata and zaptel, start over, and recreate my wanpipe stuff. He thought the problem was with the spans themselves. However, when I use the following information, and restart wanrouter, I get an error. Zapata.conf [channels] language=en context=from-pstn switchtype=national pridialplan=unknown signalling=pri_cpe faxdetect=incoming usecallerid=yes echocancel=yes echocancelwhenbridged=no echotraining=400 txgain=-6.8 rxgain=1.0 group=0 channel => 1-23 channel => 25-47 Zaptel.conf span=1,1,0,esf,b8zs span=2,1,0,e...

...9000 TTL = 255 IGNORE_FRONT_END = NO TDMV_SPAN = 1 TDMV_DCHAN = 16 TDMV_HW_DTMF = NO TDMV_HW_FAX_DETECT = NO [w1g1] ACTIVE_CH = ALL TDMV_HWEC = NO ==end wanpipe1.conf ==================== ==begin zapata.conf ==================== [trunkgroups] [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 i...