search for: dahdi_chanconfig

...one=fr fxsks=1 2. Then ran "dahdi_cfg -vv" which says: ------------- DAHDI Tools Version - 2.3.0 DAHDI Version: 2.3.0 Echo Canceller(s): Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 01) 1 channels to configure. DAHDI_CHANCONFIG failed on channel 1: No such device or address (6) ------------- 3. So I ran "lscpi -v": 03:00.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Device b100:0003 Flags: bus master, medium devsel, latency 64, IRQ 20 I/O po...

...idged = yes relaxdtmf = yes rxgain = 0.0 txgain = 0.0 immediate = no context = from-pstn channel => 1 ============ extensions.conf [from-pstn] exten => s,1,NoOp(Incoming call) ============ Finally, I ran /etc/init.d/dahdi start, and get the following error: ============ Running dahdi_cfg: DAHDI_CHANCONFIG failed on channel 1: No such device or address (6) [FAILED] ============ Here's what "tail /var/log/messages" shows: ============ # tail /var/log/messages ... Feb 21 22:44:54 centos kernel: fd != ff Feb 21 22:44:54 centos kernel: fe != ff Feb 21 22:44:54 centos kernel: Freshmaker f...

...to FXO Kewlstart Setting echocan for channel 1 to mg2 Changing signalling on channel 4 from Unused to FXS Kewlstart Setting echocan for channel 4 to mg2 However, if I am using kernel 2.6.32 I get the following -- the configs have not changed: ++ dahdi_cfg -vv DAHDI Tools Version - SVN-trunk-r7409 DAHDI_CHANCONFIG failed on channel 1: No such device or address (6) DAHDI Version: SVN-trunk-r8653M Echo Canceller(s): Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) 2...

Hello! I want to use TE121 for E1 data link to cisco. Really only for tests now. So I wrote: span = 1,1,0,ccs,hdb3,crc4 #span=1,1,0,esf,b8zs nethdlc=1-31:hdlc0 may be first line is wrong, problem is somewhere else anyway. Just because I get: # dahdi_cfg DAHDI_CHANCONFIG failed on channel 1: Function not implemented (38) This is centos 6.4 box with dahdi 2.7.0.1. Could you tell me is it possible? Thank you!

...loadzone = fr defaultzone = fr fxsks=1 ===================== # /etc/init.d/dahdi start Loading DAHDI hardware modules: wctdm: [ OK ] /usr/share/dahdi/waitfor_xpds: Missing astribank_is_starting No hardware timing source found in /proc/dahdi, loading dahdi_dummy Running dahdi_cfg: DAHDI_CHANCONFIG failed on channel 1: No such device or address (6) [FAILED] ===================== Uncommenting that line solves the issue: ===================== # /etc/init.d/dahdi start Loading DAHDI hardware modules: wctdm: [ OK ] /usr/share/dahdi/waitfor_xpds: Missing astribank_is_starting No hardware ti...

...ctor. Both the 5v and 12v lines are connected through all the way from the power supply to the tdm400 card. If I force the issue, and manually configure the s110 like this: --------------- fxoks=8 echocanceller=mg2,8 --------------- the dahdi startup script throws this error: Running dahdi_cfg: DAHDI_CHANCONFIG failed on channel 8: Invalid argument (22) Selected signaling not supported Possible causes: FXO signaling is being used on a FXO interface (use a FXS signaling variant) RBS signaling is being used on a E1 CCS span Signaling is being assigned to channel 16 of an E1 CAS span...

...r(s): Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Echo Canceler: none) (Slaves: 01) Channel 03: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 04) 3 channels to configure. DAHDI_CHANCONFIG failed on channel 1: No such device or address (6) The card appears to be detected: tempest:~# lspci 00:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface I have the kernel modules loaded: tempest:~# lsmod Module Size Used by wctdm 3...

Hi All; To overcome the echo problem, what mainly I have to do in the configuration other than the following line in the system.conf under dahdi directory? echocanceller=mg2,1-16 1) How can I know if the digium card supporting echo cancellator? 2) If I am getting a message in the consol that unable to enable the echo cancelator, then what does it means? The hardware is not supporting echo

...eller(s): Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) 3 channels to configure. DAHDI_CHANCONFIG failed on channel 1: No such device or address (6) I tried dahdi svn r8255 from today. Same result. If I reboot with 2.6.31, all's well. Am I missing something? sean

...see successful Dahdi/wcfxo messages in /var/log/messages - then, if I run either "/etc/init.d/dahdi restart", or "/etc/init.d/dahdi stop; /etc/init.d/dahdi start" without waiting more than about 10 seconds between the stop/start commands, I get the familiar error messages "DAHDI_CHANCONFIG failed on channel 1: No such device or address (6)", "Failed to initailize DAA, giving up" error, and massive "FXO PCI Master abort" errors in /var/log/messages. According to this thread, this error with X100P cards can be due to some strange wiring: https://issues.asteri...

...dahdi/system.conf loadzone=fr defaultzone=fr fxsks=1 ============ # dahdi_cfg -vv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.0.2 Echo Canceller(s): Configuration ----------- Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: none) (Slaves: 01) 1 channels to configure. DAHDI_CHANCONFIG failed on channel 1: No such device or address (6) ============ If someone's already seen this error message, any idea what the cause is, and what I could try to solve it? Thank you for any tip.

Hello Unless I overlooked it, the "Asterisk Reference Information Version 1.6.1.6" at www.asterisk.org/docs doesn't include instruction on how to start Dahdi when used to drive a TDP PCI card (OpenVox A400P with a single FXO module www.openvox.cn/products/show.php?itemid=20&lang=2). I'd like to know... 1. How to start Dahdi manually. Is this the right way? modprobe

...nel => 1-16 group=1 channel => 1-16 The calls are working, but the echo is appearing. Something strange is the result of the dahd_cfg, but really if I changed the configuration in the system.conf and I made it fxs instead of fxo, then it is not working: [root at PBX-FF asterisk]# dahdi_cfg DAHDI_CHANCONFIG failed on channel 1: Invalid argument (22) Selected signaling not supported Possible causes: FXO signaling is being used on a FXO interface (use a FXS signaling variant) RBS signaling is being used on a E1 CCS span Signaling is being assigned to channel 16 of an E1 CAS span...

...07:01.0 Ethernet controller: Digium, Inc. Wildcard TDM410 4-port analog card (rev 11) Attempting to start the dahdi service results in: Short version:Jun 06 13:11:38 worldsys.gregandeva.net sh[1026]: using '/etc/dahdi/assigned-spans.conf' Jun 06 13:11:38 worldsys.gregandeva.net sh[1026]: DAHDI_CHANCONFIG failed on channel 1: Invalid argument (22) Jun 06 13:11:38 worldsys.gregandeva.net sh[1026]: Selected signaling not supported Jun 06 13:11:38 worldsys.gregandeva.net sh[1026]: Possible causes: Jun 06 13:11:38 worldsys.gregandeva.net sh[1026]: FXO signaling is being used on a FXO interface (...

...01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) 4 channels to configure. DAHDI_CHANCONFIG failed on channel 1: No such device or address (6) *CLI> dahdi show status Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO DAHDI_DUMMY/1 (source: RTC) 1 UNCONFI 0 0 0 CAS Unk YEL 0 db (CSU)/0-133 feet (DSX-1) I am really hop...

H all... I have an Astribank (8FXS/16FXO), IBM X3200 M2, Asterisk-1.6.2.1, dahdi-linux-complete-2.2.1, libpri-1.4.10.2, centos-5.4 final. My problem is, every time i unplug the astribank power supply, and reconnect it, astribank cannot work again (lsusb result is 11x0)... but, after reinstall the asterisk and dahdi, astribank will detected (lsusb result is 11x2)... any suggestion? Regard,

Seems like I post about this about once a year, when it's time to upgrade Fedora. I first got this error trying to compile a patched version of dahdi-linux-2.11.1; I noticed that there is now a dahdi-linux-complete-3.0.0+3.0.0, so I tried that one with the same result. If I compile it while running kernel-4.16.8-300.fc28.x86_64, it compiles fine, but when I try to compile it while running

Hello, I just bought a TE121 T1/E1 card, and now trying to install it on a 1.4.23.1 asterisk with dahdi 2.1.0.4 Actually first everything went on well and i managed to see my card on dahdi. Here's the output: #asterisk# dahdi_hardware pci:0000:04:08.0 wcte12xp+ d161:8000 Wildcard TE121 and this is the scan: -------------------------- asterisk# dahdi_scan [1] active=yes alarms=RED