Under linux-2.6.38 I was able to compile and install dahdi, however when I ran dahdi_cfg -vv, I got an invalid argument on my fxs port. I have an old 400P card with one FXS and one FXO module. I have dahdi-trunk r9868 and dahdi-tools-trunk 8670. How can I get this to work correctly? Thanks in advance for any ideas. -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici covici at ccs.covici.com
-----Original Message----- From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of covici at ccs.covici.com Sent: Tuesday, April 05, 2011 1:53 PM To: asterisk-users at lists.digium.com Subject: [asterisk-users] dahdi and linux-2.6.38 Under linux-2.6.38 I was able to compile and install dahdi, however when I ran dahdi_cfg -vv, I got an invalid argument on my fxs port. I have an old 400P card with one FXS and one FXO module. I have dahdi-trunk r9868 and dahdi-tools-trunk 8670. How can I get this to work correctly? Thanks in advance for any ideas. You installed libpri ?
On 04/05/2011 01:52 PM, covici at ccs.covici.com wrote:> Under linux-2.6.38 I was able to compile and install dahdi, however when > I ran dahdi_cfg -vv, I got an invalid argument on my fxs port. I have > an old 400P card with one FXS and one FXO module. I have > dahdi-trunk r9868 and dahdi-tools-trunk 8670. > > How can I get this to work correctly? > > Thanks in advance for any ideas. >After installing dahdi did you load your wctdm.ko driver? What is the output of 'cat /sys/module/dahdi/version'? What is the output from 'cat /proc/dahdi/1'? -- Shaun Ruffell Digium, Inc. | Linux Kernel Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at: www.digium.com & www.asterisk.org