search for: da2

Hi all, I first create a matrix/data frame called "d2" if another matrix accomplishes some restrictions "dacc2" da2<-da1[colSums(dacc2)>9,] da2<-da2[(da2[,13]=24),] write.csv(da2, file =paste('hggi', i,'.csv',sep = '')) The thing is if finally da2 cannot get/passs the filters, it cannot writte a csv because there is no any true condition. How can I create anyway a csv with zero...

...none requested config: NAME STATE READ WRITE CKSUM d FAULTED 0 0 1 raidz1-0 FAULTED 0 0 6 da1 ONLINE 0 0 0 3419704811362497180 OFFLINE 0 0 0 was /dev/da2 da3 ONLINE 0 0 0 da4 ONLINE 0 0 0 da5 ONLINE 0 0 0 But if I look at the labels on all the online disks I see this: # zdb -ul /dev/da1 | egrep ''(children|path)'' chi...

...oot time) even if the card is inserted or removed (camcontrol tur can see if the media is ready or not). The system is a recent 6.1-PRERELEASE. Any ideas or suggestions? Follows some more debug info. Boot messages if CF is not present: umass0: Generic Mass Storage Device, rev 2.00/1.27, addr 2 da2 at umass-sim0 bus 0 target 0 lun 0 da2: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device da2: 40.000MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present da3 at umass-sim0 bus 0 target 0 lun 1 da3: <Generic USB CF Reader 1.01> Removable...

I am not too familiar with Cairo and RGtk2 and have the following problem: I have a container with two GTK drawing areas converted into Cairo devices. I know that I can set the current drawing context e.g. using dev.set(). But this is tedious. How can I set the context using the objects da1 or da2? w <- gtkWindow() w$setSizeRequest(400, 400) vbox <- gtkVBox() da1 <- gtkDrawingArea() da2 <- gtkDrawingArea() vbox$add(da1) vbox$add(da2) dummy <- asCairoDevice(da1) dummy <- asCairoDevice(da2) w$add(vbox) par(oma=c(0,0,0,0), mar=c(0,0,0,0)) plot(1:10) THX -...

Hi. If I create a zpool with the following command: zpool create tank raidz2 da0 da1 da2 da3 da4 da5 da6 da7 and after a reboot the device names for some reason are changed so da2 and da5 are swapped, either by altering the LUN setting on the storage or by switching cables/swapping disks etc.? How will zfs handle that? Will it simply acknowledge that all devices are present and the p...

...da0: 8678MB (17773500 512 byte sectors: 255H 63S/T 1106C) da4 at sym1 bus 0 target 4 lun 0 da4: <COMPAQ MAB3091SC 0814> Fixed Direct Access SCSI-2 device da4: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled da4: 8678MB (17773500 512 byte sectors: 255H 63S/T 1106C) da2 at sym0 bus 0 target 2 lun 0 da2: <COMPAQ AB00931B92 3AS8> Fixed Direct Access SCSI-2 device da2: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled da2: 8678MB (17773500 512 byte sectors: 255H 63S/T 1106C) da3 at sym1 bus 0 target 3 lun 0 da3: <COMPAQ AB00931B92...

...ve of a hardware, or software, problem? It happened a few times today, on two different drives, and it seem to "self-recover", since the server is still purring along without any noticeable problems: neptune# grep "timed out" /var/log/messages Jul 25 03:52:51 neptune /kernel: (da2:ahd1:0:2:0): SCB 0x40 - timed out Jul 25 03:57:22 neptune /kernel: (da2:ahd1:0:2:0): SCB 0x18 - timed out Jul 25 03:58:53 neptune /kernel: (da1:ahd1:0:1:0): SCB 0x1e - timed out Jul 26 10:55:46 neptune /kernel: (da2:ahd1:0:2:0): SCB 0x39 - timed out The drives are all U320 Seagate Cheetah 70G .....

...0 (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present da1 at umass-sim0 bus 0 target 0 lun 1 da1: <ICSI IC1100 MS 2.5B> Removable Direct Access SCSI-0 device da1: 650KB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present da2 at umass-sim0 bus 0 target 0 lun 2 da2: <ICSI IC1100 MMC/SD 2.5B> Removable Direct Access SCSI-0 device da2: 650KB/s transfers da2: 60MB (124160 512 byte sectors: 64H 32S/T 60C) da3 at umass-sim0 bus 0 target 0 lun 3 da3: <ICSI IC1100 SM 2.5B> Removable Direct Access SCSI-0 de...

...able Direct Access SCSI-0 device Oct 3 13:49:23 katrin /kernel: da0: 650KB/s transfers Oct 3 13:49:23 katrin /kernel: da0: Attempt to query device size failed: NOT READY, Medium not present Interestingly, I also got this: (camcontrol rescan 0:0:2) - but only once. Oct 3 13:38:45 katrin /kernel: da2 at umass-sim0 bus 0 target 0 lun 2 Oct 3 13:38:45 katrin /kernel: da2: <ICSI IC1100 MMC/SD 2.5B> Removable Direct Access SCSI-0 device Oct 3 13:38:45 katrin /kernel: da2: 650KB/s transfers Oct 3 13:38:45 katrin /kernel: da2: 0MB (4 512 byte sectors: 64H 32S/T 0C) (needless to say that...

...ice ses0: phy 0: parent 500304800182f4ff addr 500304800182f4ec ses0: probe10,pass2,da1: Element descriptor: 'Slot 02' ses0: probe10,pass2,da1: SAS Device Slot Element: 1 Phys at Slot 1 ses0: phy 0: SATA device ses0: phy 0: parent 500304800182f4ff addr 500304800182f4ed ses0: probe11,pass3,da2: Element descriptor: 'Slot 03' ses0: probe11,pass3,da2: SAS Device Slot Element: 1 Phys at Slot 2 ses0: phy 0: SATA device ses0: phy 0: parent 500304800182f4ff addr 500304800182f4ee ses0: probe12,pass4,da3: Element descriptor: 'Slot 04' ses0: probe12,pass4,da3: SAS Device Slot Ele...

...(287277984 512 byte sectors: 255H 63S/T 17882C) cd0 at ata1 bus 0 scbus3 target 1 lun 0 cd0: <MATSHITA DVD-ROM SR-8177 NE16> Removable CD-ROM SCSI-0 device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present da2 at ahd0 bus 0 scbus0 target 2 lun 0 da2: <SEAGATE ST3146707LC 0004> Fixed Direct Access SCSI-3 device da2: Serial Number 3KS2NFJG00007611CFPX da2: 3.300MB/s transfers da2: Command Queueing enabled da2: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C) da1 at ahd0 bus 0 scbus0 target 1...

...sectors: 255H 63S/T 1106C) da1 at ahc1 bus 0 target 1 lun 0 da1: <IBM-PSG DMVS09D !# 01B0> Fixed Direct Access SCSI-3 device da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 8678MB (17774160 512 byte sectors: 255H 63S/T 1106C) SMP: AP CPU #1 Launched! da2 at umass-sim0 bus 0 target 0 lun 0 da2: <Kingston DataTraveler II PMAP> Removable Direct Access SCSI-0 device da2: 1.000MB/s transfers da2: 983MB (2014208 512 byte sectors: 64H 32S/T 983C) gv_plex_taste: NULL p for 'var.p0.s0' gv_plex_taste: NULL p for 'tmp.p0.s0' gv_plex_tast...

...6]=2),]=1* *dat5<-dat[(dat[,5]=8 & dat[,6]=9 & dat[,7]=2),]=1* *dat6<-dat[(dat[,6]=8 & dat[,7]=9 & dat[,8]=2),6]=1* *dat7<-dat[(dat[,7]=8 & dat[,8]=9 & dat[,9]=2),7]=1* *dat8<-dat[(dat[,8]=8 & dat[,9]=9 & dat[,10]=2),8]=1* ** datfinal<-dat1+da2+dat3+dat4+dat5+dat6+dat7+dat8 final2 <- dat[ rowSums(datfinal) < 2 , ] So my last matrix "final2" will be "dat" without the rows that doesn´t pass the conditions. [[alternative HTML version deleted]]

...I Gigabit Ethernet adapters based on the Intel 82597EX Ethernet controller chips. The driver supports man for ixgbe says: ... ixgbe - Intel(R) 10Gb Ethernet driver for the FreeBSD operating system ... the Intel 82598EB ... to make things even more confusing, Dell says: DELL INTEL X520 DA2 10GBe DP+SERVER ADAPTER PCIE and finally, there is no man ix 'will the real ix please stand up?' danny

Hi All, I am looking at ZFS and I get that they call it RAIDZ which is similar to RAID 5, but what about RAID 10? Isn''t a RAID 10 setup better for data protection? So if I have 8 x 1.5tb drives, wouldn''t I: - mirror drive 1 and 5 - mirror drive 2 and 6 - mirror drive 3 and 7 - mirror drive 4 and 8 Then stripe 1,2,3,4 Then stripe 5,6,7,8 How does one do this with ZFS?

...he pool cannot be imported. Attach the missing devices and try again. see: http://www.sun.com/msg/ZFS-8000-6X config: storage750 UNAVAIL missing device ad6 ONLINE As I understand, it''s because first server have different controler, so disk is named da2 not ad6, as in second server. Output from zdb: #zdb -l /dev/ad6 -------------------------------------------- LABEL 0 -------------------------------------------- version=6 name=''storage750'' state=1 txg=8 pool_guid=1304450798920256547 hostid=2302370682...

Machine is 4.8-STABLE smaug# camcontrol devlist <COMPAQ BD009122BA 3B07> at scbus0 target 0 lun 0 (pass0,da0) <COMPAQ BD009122C6 B016> at scbus0 target 1 lun 0 (pass1,da1) <COMPAQ BD009122BA 3B07> at scbus0 target 2 lun 0 (pass2,da2) <COMPAQ BD00962373 BCJE> at scbus0 target 3 lun 0 (pass3,da3) <IBM IC35L018UCPR15-0 S70H> at scbus0 target 5 lun 0 (pass4,da4) smaug# ls -l /dev/pass* crw------- 1 root operator 31, 0 Jun 26 15:54 /dev/pass0 crw------- 1 root operator 31, 1 Jun 26 15:54 /d...

Hi, Here i have been a matrix like this, *NAME AGE PALCE TRUE/FALSE* ABC 20 INDIA XYZ 30 FRANCE PQR 40 USA MNO 30 KENIYA DEF 25 AUSTRALIA Here,* TRUE/FALSE* Column containing empty values. So my requirement what is , need to change all the *TRUE/FALSE *column value into "*TRUE*" where *AGE =

...ing Enabled da0: 4148MB (8496960 512 byte sectors: 64H 32S/T 4148C) da3 at ahc0 bus 0 target 4 lun 0 da3: <SEAGATE ST34371N 0280> Fixed Direct Access SCSI-2 device da3: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da3: 4148MB (8496960 512 byte sectors: 64H 32S/T 4148C) da2 at ahc0 bus 0 target 2 lun 0 da2: <SEAGATE ST34371N 0484> Fixed Direct Access SCSI-2 device da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da2: 4148MB (8496884 512 byte sectors: 64H 32S/T 4148C) da5 at ahc0 bus 0 target 6 lun 0 da5: <SEAGATE ST15150N 0023> Fix...

...zero and bufdaemon will go to psleep instead. No messages were reported on either the console or via syslog. Vinum details are: aalp03# vinum list 12 drives: D disk00 State: up Device /dev/da1a Avail: 3/4094 MB (0%) D disk01 State: up Device /dev/da2a Avail: 3/4094 MB (0%) D disk02 State: up Device /dev/da3a Avail: 3/4094 MB (0%) D disk03 State: up Device /dev/da4a Avail: 3/4094 MB (0%) D disk04 State: up Device /dev/da5a Avail: 3/4094 MB (0%) D disk05...