thr3ads.net - freebsd stable - Problem with 16-in-1 card reader [Mar 2006]

If this information is useful, please help other people find it:
Share via:

Alex Dupre

2006-Mar-11 12:52 UTC

Problem with 16-in-1 card reader

My new PC has an internal 16-in-1 card reader connected via USB 2.0. The
device is the Techsolo TCR-1640
(http://www.techsolo.de/product/cardreader/tcr_1640/index.php).
I boot from a compact flash inserted in it and I can mount and unmount
the same CF once the system has booted and has mounted the root
partition from my graid3 array.
The problem arise when I replace the inserted CF with another one (with
different size and filesystem) and try to mount it. Fdisk can correctly
sees the new partition table, but devfs is not updated and I cannot
mount the new media. I tried to issue all sort of camcontrol commands
(rescan the bus, eject and load the device, ...) but the dev entries
remain unchanged (equal as boot time) even if the card is inserted or
removed (camcontrol tur can see if the media is ready or not).
The system is a recent 6.1-PRERELEASE.

Any ideas or suggestions?

Follows some more debug info.

Boot messages if CF is not present:

umass0: Generic Mass Storage Device, rev 2.00/1.27, addr 2

da2 at umass-sim0 bus 0 target 0 lun 0
da2: <Generic USB SD Reader 1.00> Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 1
da3: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
da4 at umass-sim0 bus 0 target 0 lun 2
da4: <Generic USB SM Reader 1.02> Removable Direct Access SCSI-0 device
da4: 40.000MB/s transfers
da4: Attempt to query device size failed: NOT READY, Medium not present
da5 at umass-sim0 bus 0 target 0 lun 3
da5: <Generic USB MS Reader 1.03> Removable Direct Access SCSI-0 device
da5: 40.000MB/s transfers
da5: Attempt to query device size failed: NOT READY, Medium not present
(da2:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:0): SCSI Status: Check Condition
(da2:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40 asc:3a,0
(da2:umass-sim0:0:0:0): Medium not present
(da2:umass-sim0:0:0:0): Unretryable error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:0): SCSI Status: Check Condition
(da2:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40 asc:3a,0
(da2:umass-sim0:0:0:0): Medium not present
(da2:umass-sim0:0:0:0): Unretryable error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:0): SCSI Status: Check Condition
(da2:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40 asc:3a,0
(da2:umass-sim0:0:0:0): Medium not present
(da2:umass-sim0:0:0:0): Unretryable error
Opened disk da2 -> 6
(da2:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da2:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da2:umass-sim0:0:0:0): SCSI Status: Check Condition
(da2:umass-sim0:0:0:0): NOT READY csi:0,aa,55,40 asc:3a,0
(da2:umass-sim0:0:0:0): Medium not present
(da2:umass-sim0:0:0:0): Unretryable error
Opened disk da2 -> 6
(da3:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:1): SCSI Status: Check Condition
(da3:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0
(da3:umass-sim0:0:0:1): Medium not present
(da3:umass-sim0:0:0:1): Unretryable error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:1): SCSI Status: Check Condition
(da3:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0
(da3:umass-sim0:0:0:1): Medium not present
(da3:umass-sim0:0:0:1): Unretryable error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:1): SCSI Status: Check Condition
(da3:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0
(da3:umass-sim0:0:0:1): Medium not present
(da3:umass-sim0:0:0:1): Unretryable error
Opened disk da3 -> 6
(da3:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
(da3:umass-sim0:0:0:1): CAM Status: SCSI Status Error
(da3:umass-sim0:0:0:1): SCSI Status: Check Condition
(da3:umass-sim0:0:0:1): NOT READY csi:0,aa,55,40 asc:3a,0
(da3:umass-sim0:0:0:1): Medium not present
(da3:umass-sim0:0:0:1): Unretryable error
Opened disk da3 -> 6
(da4:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da4:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da4:umass-sim0:0:0:2): SCSI Status: Check Condition
(da4:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40 asc:3a,0
(da4:umass-sim0:0:0:2): Medium not present
(da4:umass-sim0:0:0:2): Unretryable error
Opened disk da4 -> 6
(da4:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da4:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da4:umass-sim0:0:0:2): SCSI Status: Check Condition
(da4:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40 asc:3a,0
(da4:umass-sim0:0:0:2): Medium not present
(da4:umass-sim0:0:0:2): Unretryable error
Opened disk da4 -> 6
(da4:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da4:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da4:umass-sim0:0:0:2): SCSI Status: Check Condition
(da4:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40 asc:3a,0
(da4:umass-sim0:0:0:2): Medium not present
(da4:umass-sim0:0:0:2): Unretryable error
Opened disk da4 -> 6
(da4:umass-sim0:0:0:2): READ CAPACITY. CDB: 25 40 0 0 0 0 0 0 0 0
(da4:umass-sim0:0:0:2): CAM Status: SCSI Status Error
(da4:umass-sim0:0:0:2): SCSI Status: Check Condition
(da4:umass-sim0:0:0:2): NOT READY csi:0,aa,55,40 asc:3a,0
(da4:umass-sim0:0:0:2): Medium not present
(da4:umass-sim0:0:0:2): Unretryable error
Opened disk da4 -> 6
(da5:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da5:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da5:umass-sim0:0:0:3): SCSI Status: Check Condition
(da5:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40 asc:3a,0
(da5:umass-sim0:0:0:3): Medium not present
(da5:umass-sim0:0:0:3): Unretryable error
Opened disk da5 -> 6
(da5:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da5:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da5:umass-sim0:0:0:3): SCSI Status: Check Condition
(da5:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40 asc:3a,0
(da5:umass-sim0:0:0:3): Medium not present
(da5:umass-sim0:0:0:3): Unretryable error
Opened disk da5 -> 6
(da5:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da5:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da5:umass-sim0:0:0:3): SCSI Status: Check Condition
(da5:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40 asc:3a,0
(da5:umass-sim0:0:0:3): Medium not present
(da5:umass-sim0:0:0:3): Unretryable error
Opened disk da5 -> 6
(da5:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
(da5:umass-sim0:0:0:3): CAM Status: SCSI Status Error
(da5:umass-sim0:0:0:3): SCSI Status: Check Condition
(da5:umass-sim0:0:0:3): NOT READY csi:0,aa,55,40 asc:3a,0
(da5:umass-sim0:0:0:3): Medium not present
(da5:umass-sim0:0:0:3): Unretryable error
Opened disk da5 -> 6


If a CF is inserted at boot I get:

da3 at umass-sim0 bus 0 target 0 lun 1
da3: <Generic USB CF Reader 1.01> Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: 30MB (62720 512 byte sectors: 64H 32S/T 30C)

and no da3:umass-sim0:0:0:1 errors


%usbdevs -dovf /dev/usb4
Controller /dev/usb4:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
VIA(0x0000), rev 1.00, device uhub4
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
 port 5 addr 2: high speed, power 250 mA, config 1, Mass Storage
Device(0x6362), Generic(0x058f), rev 1.27, device umass0
 port 6 powered
 port 7 powered
 port 8 powered


%camcontrol devlist
<QUANTUM ATLAS_V_18_WLS 0230>      at scbus1 target 0 lun 0 (da0,pass0)
<QUANTUM ATLAS10K3_18_WLS 020W>    at scbus1 target 2 lun 0 (da1,pass1)
<Generic USB SD Reader 1.00>       at scbus2 target 0 lun 0 (da2,pass2)
<Generic USB CF Reader 1.01>       at scbus2 target 0 lun 1 (da3,pass3)
<Generic USB SM Reader 1.02>       at scbus2 target 0 lun 2 (da4,pass4)
<Generic USB MS Reader 1.03>       at scbus2 target 0 lun 3 (da5,pass5)
<PLEXTOR DVDR   PX-750A 1.01>      at scbus4 target 0 lun 0 (cd0,pass6)
<HL-DT-ST DVD-ROM GDR8164B 0L06>   at scbus4 target 1 lun 0 (cd1,pass7)

--
Alex Dupre

Benjamin Lutz

2006-Mar-11 14:00 UTC

head link

Problem with 16-in-1 card reader

Hi Alex,
> My new PC has an internal 16-in-1 card reader connected via USB 2.0. The
> device is the Techsolo TCR-1640
> (http://www.techsolo.de/product/cardreader/tcr_1640/index.php).
> I boot from a compact flash inserted in it and I can mount and unmount
> the same CF once the system has booted and has mounted the root
> partition from my graid3 array.
> The problem arise when I replace the inserted CF with another one (with
> different size and filesystem) and try to mount it. Fdisk can correctly
> sees the new partition table, but devfs is not updated and I cannot
> mount the new media. I tried to issue all sort of camcontrol commands
> (rescan the bus, eject and load the device, ...) but the dev entries
> remain unchanged (equal as boot time) even if the card is inserted or
> removed (camcontrol tur can see if the media is ready or not).
> The system is a recent 6.1-PRERELEASE.
>
> Any ideas or suggestions?
Did you try to unplug the whole card reader, inserting the new CF card an then 
plugging it back into an USB port? It's /dev/da* entries should disappear 
once it's unplugged, and be newly created when it's reconnected.

Cheers
Benjamin
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 191 bytes
Desc: not available
Url :
http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20060311/90a0cf98/attachment.bin

Robert Marella

2006-Mar-11 22:49 UTC

head link

Problem with 16-in-1 card reader

On Sat, 11 Mar 2006 13:51:30 +0100
Alex Dupre <ale@FreeBSD.org> wrote:
> My new PC has an internal 16-in-1 card reader connected via USB 2.0.
> The device is the Techsolo TCR-1640
> (http://www.techsolo.de/product/cardreader/tcr_1640/index.php).
> I boot from a compact flash inserted in it and I can mount and unmount
> the same CF once the system has booted and has mounted the root
> partition from my graid3 array.
> The problem arise when I replace the inserted CF with another one
> (with different size and filesystem) and try to mount it. Fdisk can
> correctly sees the new partition table, but devfs is not updated and
> I cannot mount the new media. 
<snip>

Hello Alex

This problem has been discussed many times on the lists. In order to
update devfs you can use:

cat /dev/null > /dev/daX

I seem to remember another method using dd.

I hope this helps.

Robert

M. Warner Losh

2006-Mar-12 02:50 UTC

head link

Problem with 16-in-1 card reader

In message: <20060311124931.62eee647@frankie.konav201.local>
            Robert Marella <rmarella@gmail.com> writes:
: On Sat, 11 Mar 2006 13:51:30 +0100
: Alex Dupre <ale@FreeBSD.org> wrote:
: 
: > My new PC has an internal 16-in-1 card reader connected via USB 2.0.
: > The device is the Techsolo TCR-1640
: > (http://www.techsolo.de/product/cardreader/tcr_1640/index.php).
: > I boot from a compact flash inserted in it and I can mount and unmount
: > the same CF once the system has booted and has mounted the root
: > partition from my graid3 array.
: > The problem arise when I replace the inserted CF with another one
: > (with different size and filesystem) and try to mount it. Fdisk can
: > correctly sees the new partition table, but devfs is not updated and
: > I cannot mount the new media. 
: 
: <snip>
: 
: Hello Alex
: 
: This problem has been discussed many times on the lists. In order to
: update devfs you can use:
: 
: cat /dev/null > /dev/daX
: 
: I seem to remember another method using dd.

dd if=/dev/null of=/dev/daX count=0

Simon Dick

2006-Mar-12 20:09 UTC

head link

Problem with 16-in-1 card reader

...... Original Message .......
On Sat, 11 Mar 2006 16:24:21 -0700 (MST) "M. Warner Losh"
<imp@bsdimp.com>
wrote:>In message: <20060311124931.62eee647@frankie.konav201.local>
>            Robert Marella <rmarella@gmail.com> writes:
>: On Sat, 11 Mar 2006 13:51:30 +0100
>: Alex Dupre <ale@FreeBSD.org> wrote:
>: 
>: > My new PC has an internal 16-in-1 card reader connected via USB 2.0.
>: > The device is the Techsolo TCR-1640
>: > (http://www.techsolo.de/product/cardreader/tcr_1640/index.php).
>: > I boot from a compact flash inserted in it and I can mount and
unmount
>: > the same CF once the system has booted and has mounted the root
>: > partition from my graid3 array.
>: > The problem arise when I replace the inserted CF with another one
>: > (with different size and filesystem) and try to mount it. Fdisk can
>: > correctly sees the new partition table, but devfs is not updated and
>: > I cannot mount the new media. 
>: 
>: <snip>
>: 
>: Hello Alex
>: 
>: This problem has been discussed many times on the lists. In order to
>: update devfs you can use:
>: 
>: cat /dev/null > /dev/daX
>: 
>: I seem to remember another method using dd.
>
>dd if=/dev/null of=/dev/daX count=0
true >/dev/daX
is my favourite due to typing length.

Possibly Parallel Threads

Search for more possibly parallel threads

freebsd stable - Mar 2006 - Problem with 16-in-1 card reader

Problem with 16-in-1 card reader

Problem with 16-in-1 card reader

Problem with 16-in-1 card reader

Problem with 16-in-1 card reader

Problem with 16-in-1 card reader

Possibly Parallel Threads