Displaying 20 results from an estimated 29 matches for "brgphy0".
2009 Mar 16
1
bge0: EEPROM read timed
...d 0x4b657654
bge0: firmware handshake timed out, found 0x4b657654
bge0: EEPROM read timed out
bge0: failed to read EEPROM
device_attach: bge0 attach returned 6
bge1: <Broadcom BCM5703 B0, ASIC rev. 0x1100> mem
0xe8600000-0xe860ffff irq 21 at device 1.0 on pci3
miibus0: <MII bus> on bge1
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge1: Ethernet address: 00:21:5e:4d:05:c8
any hints?
P.S. I see EEPROM timeout fixes were already merged to RELENG_6 (I
have post-fix version certainly).
May...
2012 Nov 16
2
bge on the new Mac Mini
Hi all,
Over the last month or so I've installed FreeBSD 9 (-stable) on several Mac
Minis via the memstick image; they seem to be pretty good little boxes for
things like offsite secondary nameservers, for example, and they're easily
replaced in case of problems.
However, the newest minis have slightly different hardware, and FreeBSD can't
find the built-in NIC. pciconf -lv on the
2003 Jun 04
3
bge drivers does not work for 3COM 3C996-SX / 3C996B-T
I'm experiencing similar problems with a 3C996-T under 4.8-REL.
In particular, connecting a 4.8-REL machine to a 5.1-REL machine leads
to some interesting situations: I can do simple pings across the link,
but ssh fails, and heavy pings crash the 4.8 machine. Similarly
changing the interface configuration with ifconfig tends to crash the
4.8 machine (mtu, link0, up/down, etc). The
2009 Jan 06
2
ACPI support?
...s of rid 0x10 res 3 failed (0, 0xffffffff).
bge0: couldn't map memory
device_attach: bge0 attach returned 6
...
without ACPI:
...
bge0: <Broadcom NetLink Gigabit Ethernet Controller, ASIC rev. 0xb002>
mem 0xf3000000-0xf300ffff irq 17 at device 0.0 on pci8
miibus0: <MII bus> on bge0
brgphy0: <BCM5787 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge0: Ethernet address: 00:1b:24:ca:a0:aa
bge0: [ITHREAD]
...
It seems that some resources are disabled by ACPI and should be enabled
first.
Here is dme...
2009 Mar 03
1
bce: unable to fix media
...= 'Broadcom Corporation'
device = 'NetXtreme II BCM5708S Gigabit Ethernet'
class = network
subclass = ethernet
bce0: <Broadcom NetXtreme II BCM5708 1000Base-SX (B2)> mem
0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci6
miibus0: <MII bus> on bce0
brgphy0: <BCM5708S 1000/2500BaseSX PHY> PHY 2 on miibus0
brgphy0: 1000baseSX-FDX, auto
bce0: Ethernet address: 00:15:c5:fe:0f:c6
bce0: [ITHREAD]
bce0: ASIC (0x57081021); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W
(0x02090105); Flags( MFW MSI )
--
Cris, member of G.U.F.I
Italian FreeBSD User Group...
2012 Jul 03
3
bge problems in RELENG_9, bge0: watchdog timeout -- resetting
...bge0: watchdog timeout -- resetting
Then everything hangs. Can not log in using ssh.
I'm running: FreeBSD-9.0-RELENG_9-20120701-JPSNAP-amd64
Info about the NIC:
# devinfo -rv | grep phy
brgphy0 pnpinfo oui=0x1be9 model=0x22 rev=0x0 at phyno=1
brgphy1 pnpinfo oui=0x1be9 model=0x22 rev=0x0 at phyno=2
brgphy2 pnpinfo oui=0x1be9 model=0x22 rev=0x0 at phyno=3
brgphy3 pnpinfo oui=0x1be9 model=0x22 rev=0x0 at phyno=4...
2006 Mar 22
0
"TIMEOUT - WRITE_DMA" with SiI 3512 SATA on IBM eServer 326
....3 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem 0xfe000000-0xfe00ffff,0xfe010000-0xfe01ffff irq 24 at device 1.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:11:25:1e:23:a4
bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2003> mem 0xfe020000-0xfe02ffff,0xfe030000-0xfe03f...
2012 Jul 13
2
stable/9 panic Bad tailq NEXT(0xffffffff80e52660->tqh_last) != NULL
...CSI v1.0.80.0
bge0: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 264 to local APIC 0 vector 59
bge0: using IRQ 264 for MSI
bge0: CHIP ID 0x05720000; ASIC REV 0x5720; CHIP REV 0x57200; PCI-E
bge0: Disabling fastboot
bge0: Disabling fastboot
miibus0: <MII bus> on bge0
brgphy0: <BCM5720C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: OUI 0x001be9, model 0x0036, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: bpf attached
bge0: Ethernet address: 18:03:73:f...
2003 Nov 01
1
CPU1 never used despite HTT?
...erboard
IOAPIC #1 intpin 12 -> irq 11
IOAPIC #1 intpin 13 -> irq 13
pci3: <PCI bus> on pcib3
bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xfcf10000-0xfcf1ffff irq 11 at device 6.0 on pci3
bge0: Ethernet address: 00:06:5b:8d:20:5e
miibus0: <MII bus> on bge0
brgphy0: <BCM5701 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge1: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xfcf00000-0xfcf0ffff irq 13 at device 8.0 on pci3
bge1: Ethernet address: 00:06:5b:8d:20...
2006 Mar 13
0
Anyone seen this scsi error before ?
...device 2.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCIBIOS PCI-PCI bridge> irq 5 at device 4.0 on pci0
pci2: <PCI bus> on pcib2
bge0: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem 0xdd100000-0xdd10ffff irq 5 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:15:60:5f:66:fe
pcib3: <PCIBIOS PCI-PCI bridge> irq 5 at device 5.0 on pci0
pci3: <PCI bus> on pcib3
bge1: <Broadcom...
2008 Sep 30
4
[FreeBSD] Fix for ServerWorks HT1000 in upcoming 7.1?
Hi,
I have a server (Dell PowerEdge SC1435, ServerWorks HT1000) on which
I'd like to try installing FreeBSD. I've already failed to make 7.0
work on this box and was wondering if you have information about the
behavior of the upcoming 7.1 on this hardware.
I've been following the "HT1000 chipset errata saga" thread, and the
commits by sos@ to CVS (around Jan 2008), but have
2008 Nov 30
1
panic: spin lock held too long on 7.1-PRERELEASE (sio)
...evice 2.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib2
bge0: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x2100> mem 0xfddf0000-0xfddfffff irq 25 at device 1.0 on pci3
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:16:35:05:b6:dd
bge0: [ITHREAD]
bge1: <HP NC7782 Gigabit Server Adapter, ASIC rev. 0x2100> mem 0xfdde0000-0xfddeffff irq 2...
2003 Apr 10
0
panic: vinvalbuf: flush failed
...'
ciss0: heartbeat 0x30000033
ciss0: 1 logical drive
ciss0: logical drive 1: RAID 0, 16896MB online
bge0: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xf7fb0000-0xf7fbffff irq 5 at device 5.0 on pci1
bge0: Ethernet address: 00:08:02:a0:c5:06
miibus0: <MII bus> on bge0
brgphy0: <BCM5701 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge1: <Broadcom BCM5701 Gigabit Ethernet, ASIC rev. 0x105> mem 0xf7fa0000-0xf7faffff irq 10 at device 6.0 on pci1
bge1: Ethernet address: 00:08:02:a0:c5...
2003 Apr 09
1
Panics on 4.7 system
...dge> on motherboard
IOAPIC #1 intpin 12 -> irq 17
IOAPIC #1 intpin 13 -> irq 18
pci5: <PCI bus> on pcib3
bge0: <Broadcom BCM5701 Gigabit Ethernet> mem 0xeff10000-0xeff1ffff irq
17 at device 6.0 on pci5
bge0: Ethernet address: 00:06:5b:f3:09:7d
miibus0: <MII bus> on bge0
brgphy0: <BCM5701 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge1: <Broadcom BCM5701 Gigabit Ethernet> mem 0xeff00000-0xeff0ffff irq
18 at device 8.0 on pci5
bge1: Ethernet address: 00:06:5b:f3:09:7e
miibus1:...
2003 Apr 23
1
Compaq ML350 hangs very strange
...60 Wide Channel B, SCSI Id=7, 32/253 SCBs
pci0: <display, VGA> at device 3.0 (no driver attached)
bge0: <Broadcom BCM5702X Gigabit Ethernet, ASIC rev. 0x1002> mem 0xf5fe0000-0xf5feffff irq 5 at device 4.0 on pci0
bge0: Ethernet address: 00:08:02:a3:9c:e6
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
pci0: <base peripheral> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0:...
2008 Aug 16
0
Panic in nfs/ffs after upgrade from 6.2 to 6.3-RELEASE
...at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib2
bge0: <Broadcom BCM5750 C1, ASIC rev. 0x4201> mem 0xfeaf0000-0xfeafffff irq 16 at device 0.0 on pci3
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: Ethernet address: 00:18:f3:2a:e0:cf
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci2: <ACPI PCI bus> on pcib3
bge1: <Broadco...
2013 Mar 25
2
gptzfsboot: error 4 lba 30
...> at device 0.0 on pci3
pci4: <PCI bus> on pcib8
bce0: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem 0xf8000000-0xf9ffffff irq 41 at device 0.0 on pci4
bce0: /usr/src/sys/dev/bce/if_bce.c(1258): Management firmware enabled but not running!
miibus0: <MII bus> on bce0
brgphy0: <BCM5708C 1000BASE-T media interface> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce0: Ethernet address: 00:1b:78:38:dd:02
bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit,...
2006 Mar 30
5
boot problem in HP Proliant ML370 G4
Hi,
I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4.
The problem is "-" appears on the screen and it never boots unless
somebody hits the
"Enter" key. Sometimes even PS2 keyboard doesn't respond during that
time. Tried with
USB keyboard, same problem.
The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic
(mpt-5.0.5.20.00 bios) LSI1030-IT
2008 Nov 18
3
High system in %system load .
...: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x4201> mem
0xfeaf0000-0xfeafffff irq 16 at device 0.0 on pci3
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-FDX, auto
bge0: Ethernet address: 00:1f:c6:48:c8:9b
bge0: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci4: <ACPI PCI bus> on p...
2003 Sep 29
2
4.9-RC and bge
Recent SUP.
Installed on Dell PowerEdge 4600.
Getting tons of:
Sep 30 12:23:16 zige /kernel: bge0: gigabit link up
Sep 30 12:23:46 zige last message repeated 98 times
Also getting some TCP retransmits. This causes noticable delays in
pretty much everything I do now. Not a problem prior to the SUP.
I was on 4.8-STABLE before.
When pulling/replacing cables, it went into a mode where it would