Graham Bentley wrote:> Recently swapped out my Sony for a HP DAT and
> got this first time in dmesg
>
> (sa0:ahc0:0:6:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 0 0
> (sa0:ahc0:0:6:0): CAM Status: SCSI Status Error
> (sa0:ahc0:0:6:0): SCSI Status: Check Condition
> (sa0:ahc0:0:6:0): UNIT ATTENTION asc:28,0
> (sa0:ahc0:0:6:0): Not ready to ready change, medium may have changed
> (sa0:ahc0:0:6:0): Unretryable error
>
> Anyone shed any light upon it ?
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to
"freebsd-questions-unsubscribe@freebsd.org"
>
Hi, i've got similar (but not exact the same) problem with my SCSI
controller on my freebsd box freshly installed with default options
9GENERIC kernel etc etc).Server model is HP DL 140.My 'uname -a' is:
web# uname -a
FreeBSD web.xxxxx.com 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #0: Mon Feb
20 09:16:50 EST 2006
root@web.gltcall.com:/usr/obj/usr/src/sys/GENERIC i386
web#
dmesg is attached.Any advice on what is happening ?
Mar 11 13:00:52 web kernel: mpt0: Request 0xc4bc06e8 Timed out.
Mar 11 13:00:52 web kernel: mpt0: Request 0xc4bbf478 Timed out.
Mar 11 13:00:52 web kernel: mpt0: Request 0xc4bc02d8 Timed out.
Mar 11 13:00:52 web kernel: mpt0: Request 0xc4bc0080 Timed out.
Mar 11 13:00:52 web kernel: mpt0: Attempting to Abort Req 0xc4bbfdd8
Mar 11 13:06:12 web kernel: mpt0: mpt_recover_commands: Abort
timed-out.Resetting controller
Mar 11 13:06:12 web kernel: mpt0: soft reset failed: ack timeout
Mar 11 13:06:12 web kernel: mpt0: WARNING - Failed hard reset! Trying to
initialize anyway.
Mar 11 13:06:12 web kernel: mpt0: Unhandled Event Notify Frame. Event
0xc086250d.
Mar 11 13:06:12 web kernel: (da0:mpt0:0:0:0): WRITE(10). CDB: 2a 0 0 85
95 8f 0 0 20 0
Mar 11 13:06:12 web kernel: (da0:mpt0:0:0:0): CAM Status: SCSI Status Error
Mar 11 13:06:12 web kernel: (da0:mpt0:0:0:0): SCSI Status: Check Condition
Mar 11 13:06:12 web kernel: (da0:mpt0:0:0:0): UNIT ATTENTION asc:29,2
Mar 11 13:06:12 web kernel: (da0:mpt0:0:0:0): Scsi bus reset occurred
Mar 11 13:06:12 web kernel: (da0:mpt0:0:0:0): Retrying Command (per
Sense Data)
-------------- next part --------------
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-PRERELEASE #0: Mon Feb 20 09:16:50 EST 2006
root@web.gltcall.com:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2822.51-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE
,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
AMD Features=0x20100000<NX,LM>
Hyperthreading: 2 logical CPUs
real memory = 1073152000 (1023 MB)
avail memory = 1041223680 (992 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 25 Entries> on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <PCIBIOS PCI-PCI bridge> irq 5 at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCIBIOS PCI-PCI bridge> irq 5 at device 4.0 on pci0
pci2: <PCI bus> on pcib2
bge0: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem
0xdd100000-0xdd10ffff irq 5 at device 0.0 on pci2
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:15:60:5f:66:fe
pcib3: <PCIBIOS PCI-PCI bridge> irq 5 at device 5.0 on pci0
pci3: <PCI bus> on pcib3
bge1: <Broadcom BCM5721 Gigabit Ethernet, ASIC rev. 0x4101> mem
0xdd200000-0xdd20ffff irq 5 at device 0.0 on pci3
miibus1: <MII bus> on bge1
brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge1: Ethernet address: 00:15:60:5f:66:ff
pcib4: <PCIBIOS PCI-PCI bridge> irq 5 at device 6.0 on pci0
pci4: <PCI bus> on pcib4
pcib5: <PCIBIOS PCI-PCI bridge> at device 0.0 on pci4
pci5: <PCI bus> on pcib5
pci4: <base peripheral, interrupt controller> at device 0.1 (no driver
attached)
pcib6: <PCIBIOS PCI-PCI bridge> at device 0.2 on pci4
pci6: <PCI bus> on pcib6
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2000-0x20ff mem
0xdd420000-0xdd43ffff,0xdd400000-0xdd41ffff irq 5 at device 3.0
on pci6
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.2.14.0
mpt0: Unhandled Event Notify Frame. Event 0xa.
pci4: <base peripheral, interrupt controller> at device 0.3 (no driver
attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1400-0x141f irq
5 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1420-0x143f irq
3 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem
0xdd001000-0xdd0013ff irq 11 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
pcib7: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci7: <PCI bus> on pcib7
pci7: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1460-0x146f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xcb000-0xcefff,0xdc000-0xdffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0501> can't assign resources (port)
fdc1: No FDOUT register!
Timecounter "TSC" frequency 2822508633 Hz quality 800
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
da0 at mpt0 bus 0 target 0 lun 0
da0: <COMPAQ BF03698578 HPB2> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing
Enabled
da0: 34732MB (71132000 512 byte sectors: 255H 63S/T 4427C)
Trying to mount root from ufs:/dev/da0s1a
bge0: link state changed to UP
