Hi, I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4. The problem is "-" appears on the screen and it never boots unless somebody hits the "Enter" key. Sometimes even PS2 keyboard doesn't respond during that time. Tried with USB keyboard, same problem. The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic (mpt-5.0.5.20.00 bios) LSI1030-IT controller and one Compaq BD1468A4B5 146GB SCSI disk. It didn't even boot with WITNESS and INVARIANTS options, scrolls very fast and forever showing some SCSI stuffs. How to solve this problem? Does anybody have this kind of issues before? thanks, Ganbold
Here is dmes.boot and pciconf output on FreeBSD-6.0-RELEASE. Boot takes 3-4 minutes after "da0: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C)" line and continues. I will try to upgrade again to 6.1-PRERELEASE later today. I did before and the problem still was there. dmesg.boot: Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC MPTable: <HP PROLIANT > Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3200.12-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf43 Stepping = 3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>> AMD Features=0x20000000<LM> Hyperthreading: 2 logical CPUs real memory = 1073688576 (1023 MB) avail memory = 1041793024 (993 MB) ioapic0: Assuming intbase of 0 ioapic1: Assuming intbase of 24 ioapic2: Assuming intbase of 48 ioapic0 <Version 2.0> irqs 0-23 on motherboard ioapic1 <Version 2.0> irqs 24-47 on motherboard ioapic2 <Version 2.0> irqs 48-71 on motherboard npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <HP P50> on motherboard acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 3 on acpi0 pci_link1: <ACPI PCI Link LNKB> irq 3 on acpi0 pci_link2: <ACPI PCI Link LNKC> irq 3 on acpi0 pci_link3: <ACPI PCI Link LNKD> irq 3 on acpi0 pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0 pci_link5: <ACPI PCI Link LNKF> irq 3 on acpi0 pci_link6: <ACPI PCI Link LNKG> irq 3 on acpi0 pci_link7: <ACPI PCI Link LNKH> irq 3 on acpi0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 cpu0: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <MPTable PCI-PCI bridge> at device 2.0 on pci0 pci2: <PCI bus> on pcib1 pcib2: <MPTable PCI-PCI bridge> at device 0.0 on pci2 pci3: <PCI bus> on pcib2 mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x4000-0x40ff mem 0xfdee0000-0xfdefffff,0xfdec0000-0xfdedffff irq 31 at device 3.0 on pci3 mpt0: [GIANT-LOCKED] mpt0: MPI Version=1.2.14.0 mpt0: Unhandled Event Notify Frame. Event 0xa. mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x4400-0x44ff mem 0xfdea0000-0xfdebffff,0xfde80000-0xfde9ffff irq 27 at device 3.1 on pci3 mpt1: [GIANT-LOCKED] mpt1: MPI Version=1.2.14.0 mpt1: Unhandled Event Notify Frame. Event 0xa. pcib3: <MPTable PCI-PCI bridge> at device 0.2 on pci2 pci7: <PCI bus> on pcib3 bge0: <Broadcom BCM5703X Gigabit Ethernet, ASIC rev. 0x1100> mem 0xfdff0000-0xfdffffff irq 49 at device 3.0 on pci7 miibus0: <MII bus> on bge0 brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: Ethernet address: 00:14:c2:60:1e:fc pcib4: <MPTable PCI-PCI bridge> at device 4.0 on pci0 pci11: <PCI bus> on pcib4 pcib5: <MPTable PCI-PCI bridge> at device 5.0 on pci0 pci14: <PCI bus> on pcib5 uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x2000-0x201f irq 9 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x2020-0x203f irq 9 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x2040-0x205f irq 9 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x2060-0x207f irq 9 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfbef0000-0xfbef03ff irq 9 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <EHCI (generic) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib6: <MPTable PCI-PCI bridge> at device 30.0 on pci0 pci1: <PCI bus> on pcib6 pci1: <display, VGA> at device 3.0 (no driver attached) pci1: <base peripheral> at device 4.0 (no driver attached) pci1: <base peripheral> at device 4.2 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77d irq 7 drq 0 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: [FAST] fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 3200124448 Hz quality 800 Timecounters tick every 1.000 msec Waiting 5 seconds for SCSI devices to settle acd0: CDROM <HL-DT-ST CD-ROM GCR-8486B/2.00> at ata0-master UDMA33 da0 at mpt0 bus 0 target 0 lun 0 da0: <COMPAQ BD1468A4B5 HPB8> Fixed Direct Access SCSI-3 device da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled da0: 140014MB (286749488 512 byte sectors: 255H 63S/T 17849C) Trying to mount root from ufs:/dev/da0s1a pciconf -lv: hostb0@pci0:0:0: class=0x060000 card=0x32000e11 chip=0x35908086 rev=0x0c hdr=0x00 vendor = 'Intel Corporation' device = 'E752x Server Memory Controller Hub' class = bridge subclass = HOST-PCI pcib1@pci0:2:0: class=0x060400 card=0x00000050 chip=0x35958086 rev=0x0c hdr=0x01 vendor = 'Intel Corporation' device = 'E752x Memory Controller Hub PCI Express Port A0' class = bridge subclass = PCI-PCI pcib4@pci0:4:0: class=0x060400 card=0x00000050 chip=0x35978086 rev=0x0c hdr=0x01 vendor = 'Intel Corporation' device = 'E752x Memory Controller Hub PCI Express Port B0' class = bridge subclass = PCI-PCI pcib5@pci0:5:0: class=0x060400 card=0x00000050 chip=0x35988086 rev=0x0c hdr=0x01 vendor = 'Intel Corporation' device = 'E752x Memory Controller Hub PCI Express Port B1' class = bridge subclass = PCI-PCI uhci0@pci0:29:0: class=0x0c0300 card=0x32010e11 chip=0x24d28086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1' class = serial bus subclass = USB uhci1@pci0:29:1: class=0x0c0300 card=0x32010e11 chip=0x24d48086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2' class = serial bus subclass = USB uhci2@pci0:29:2: class=0x0c0300 card=0x32010e11 chip=0x24d78086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3' class = serial bus subclass = USB uhci3@pci0:29:3: class=0x0c0300 card=0x32010e11 chip=0x24de8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4' class = serial bus subclass = USB ehci0@pci0:29:7: class=0x0c0320 card=0x32010e11 chip=0x24dd8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) USB 2.0 EHCI Controller' class = serial bus subclass = USB pcib6@pci0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086 rev=0xc2 hdr=0x01 vendor = 'Intel Corporation' device = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), 6300ESB Hub Interface to PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:31:0: class=0x060100 card=0x00000000 chip=0x24d08086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) LPC Interface Bridge' class = bridge subclass = PCI-ISA atapci0@pci0:31:1: class=0x01018a card=0x32010e11 chip=0x24db8086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82801EB/ER (ICH5/ICH5R) EIDE Controller' class = mass storage subclass = ATA pcib2@pci2:0:0: class=0x060400 card=0x00000044 chip=0x03298086 rev=0x09 hdr=0x01 vendor = 'Intel Corporation' device = '6700PXH PCI Express-to-PCI Express Bridge A' class = bridge subclass = PCI-PCI pcib3@pci2:0:2: class=0x060400 card=0x00000044 chip=0x032a8086 rev=0x09 hdr=0x01 vendor = 'Intel Corporation' device = '6700PXH PCI Express-to-PCI Express Bridge B' class = bridge subclass = PCI-PCI mpt0@pci3:3:0: class=0x010000 card=0x00da0e11 chip=0x00301000 rev=0x08 hdr=0x00 vendor = 'LSI Logic (Was: Symbios Logic, NCR)' device = 'LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller' class = mass storage subclass = SCSI mpt1@pci3:3:1: class=0x010000 card=0x00da0e11 chip=0x00301000 rev=0x08 hdr=0x00 vendor = 'LSI Logic (Was: Symbios Logic, NCR)' device = 'LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller' class = mass storage subclass = SCSI bge0@pci7:3:0: class=0x020000 card=0x00cb0e11 chip=0x16c714e4 rev=0x10 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM5703A3 NetXtreme Gigabit Ethernet' class = network subclass = ethernet none0@pci1:3:0: class=0x030000 card=0x001e0e11 chip=0x47521002 rev=0x27 hdr=0x00 vendor = 'ATI Technologies Inc' device = 'Rage XL PCI' class = display subclass = VGA none1@pci1:4:0: class=0x088000 card=0xb2060e11 chip=0xb2030e11 rev=0x01 hdr=0x00 vendor = 'Compaq Computer Corp (Now owned by Hewlett-Packard)' device = 'iLo Integrated Lights Out Processor' class = base peripheral none2@pci1:4:2: class=0x088000 card=0xb2060e11 chip=0xb2040e11 rev=0x01 hdr=0x00 vendor = 'Compaq Computer Corp (Now owned by Hewlett-Packard)' device = 'iLo Integrated Lights Out Processor' class = base peripheral Ganbold Matthew Jacob wrote:> insufficient info > > On 3/30/06, Ganbold <ganbold@micom.mng.net> wrote: > >> Hi, >> >> I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4. >> The problem is "-" appears on the screen and it never boots unless >> somebody hits the >> "Enter" key. Sometimes even PS2 keyboard doesn't respond during that >> time. Tried with >> USB keyboard, same problem. >> >> The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic >> (mpt-5.0.5.20.00 bios) LSI1030-IT controller and one Compaq BD1468A4B5 >> 146GB SCSI disk. >> >> It didn't even boot with WITNESS and INVARIANTS options, scrolls very >> fast and forever showing some SCSI stuffs. >> >> How to solve this problem? Does anybody have this kind of issues before? >> >> thanks, >> >> Ganbold >> >> _______________________________________________ >> freebsd-stable@freebsd.org mailing list >> http://lists.freebsd.org/mailman/listinfo/freebsd-stable >> To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >> >> > > > >
Kris Kennaway
2006-Apr-03 04:08 UTC
contigmalloc() lameness (Re: boot problem in HP Proliant ML370 G4)
On Mon, Apr 03, 2006 at 12:56:57PM +0900, Ganbold wrote:> Here is dmes.boot and pciconf output on FreeBSD-6.0-RELEASE. > Boot takes 3-4 minutes after "da0: 140014MB (286749488 512 byte sectors: > 255H 63S/T 17849C)" line and continues. > I will try to upgrade again to 6.1-PRERELEASE later today. I did before > and the problem still was there.The mpt driver calls contigmalloc in a way that takes ages to run because it was poorly rewritten some time ago. Scottl partially fixed it on 7.0 (after the problem became much worse there - it was taking over 40 minutes instead of 4) but the change is not complete enough to back-port yet. Kris -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20060403/32e6fe87/attachment.pgp
Ganbold
2006-Apr-03 05:27 UTC
contigmalloc() lameness (Re: boot problem in HP Proliant ML370 G4)
Kris Kennaway wrote:> On Mon, Apr 03, 2006 at 12:56:57PM +0900, Ganbold wrote: > >> Here is dmes.boot and pciconf output on FreeBSD-6.0-RELEASE. >> Boot takes 3-4 minutes after "da0: 140014MB (286749488 512 byte sectors: >> 255H 63S/T 17849C)" line and continues. >> I will try to upgrade again to 6.1-PRERELEASE later today. I did before >> and the problem still was there. >> > > The mpt driver calls contigmalloc in a way that takes ages to run > because it was poorly rewritten some time ago. Scottl partially fixed > it on 7.0 (after the problem became much worse there - it was taking > over 40 minutes instead of 4) but the change is not complete enough to > back-port yet. >I see. Yes, it eventually becomes up after 3-4 minutes. However what annoying is every time I reboot/restart the server I have to manually press "Enter" key. How can I resolve this issue? Is there any known solution? In any case I will try first RELENG_6 then CURRENT on this machine. thanks, Ganbold> Kris
Kris Kennaway
2006-Apr-03 05:33 UTC
contigmalloc() lameness (Re: boot problem in HP Proliant ML370 G4)
On Mon, Apr 03, 2006 at 02:27:31PM +0900, Ganbold wrote:> Kris Kennaway wrote: > >On Mon, Apr 03, 2006 at 12:56:57PM +0900, Ganbold wrote: > > > >>Here is dmes.boot and pciconf output on FreeBSD-6.0-RELEASE. > >>Boot takes 3-4 minutes after "da0: 140014MB (286749488 512 byte sectors: > >>255H 63S/T 17849C)" line and continues. > >>I will try to upgrade again to 6.1-PRERELEASE later today. I did before > >>and the problem still was there. > >> > > > >The mpt driver calls contigmalloc in a way that takes ages to run > >because it was poorly rewritten some time ago. Scottl partially fixed > >it on 7.0 (after the problem became much worse there - it was taking > >over 40 minutes instead of 4) but the change is not complete enough to > >back-port yet. > > > I see. Yes, it eventually becomes up after 3-4 minutes. > However what annoying is every time I reboot/restart the server > I have to manually press "Enter" key. How can I resolve this issue?Please explain what you mean: why do you have to manually press "Enter"? Kris -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20060403/572513b6/attachment.pgp
Ganbold
2006-Apr-03 06:16 UTC
contigmalloc() lameness (Re: boot problem in HP Proliant ML370 G4)
Kris Kennaway wrote:> On Mon, Apr 03, 2006 at 02:27:31PM +0900, Ganbold wrote: > >> Kris Kennaway wrote: >> >>> On Mon, Apr 03, 2006 at 12:56:57PM +0900, Ganbold wrote: >>> >>> >>>> Here is dmes.boot and pciconf output on FreeBSD-6.0-RELEASE. >>>> Boot takes 3-4 minutes after "da0: 140014MB (286749488 512 byte sectors: >>>> 255H 63S/T 17849C)" line and continues. >>>> I will try to upgrade again to 6.1-PRERELEASE later today. I did before >>>> and the problem still was there. >>>> >>>> >>> The mpt driver calls contigmalloc in a way that takes ages to run >>> because it was poorly rewritten some time ago. Scottl partially fixed >>> it on 7.0 (after the problem became much worse there - it was taking >>> over 40 minutes instead of 4) but the change is not complete enough to >>> back-port yet. >>> >>> >> I see. Yes, it eventually becomes up after 3-4 minutes. >> However what annoying is every time I reboot/restart the server >> I have to manually press "Enter" key. How can I resolve this issue? >> > > Please explain what you mean: why do you have to manually press "Enter"? >It is not booting, "-" appears on screen and waits forever. When I press "Enter" key on keyboard it starts booting. Ganbold> Kris > >