search for: bootrom

I'm having problems updating my bootrom to the latest (3.2.2) version. Basically, my phone starts downloading the bootrom, but I am completely certain that it doesn't actually complete the process. It gives me an "error updating bootROM!" message, but it only takes about 2 seconds to complete the download (which, because...

I was progressively upgrading this phone from 3.1.2 to 3.2.3, then to 4.0.0. v3.2.3 worked fine, but when I went to 4.0.0 (Even adding the more specific 2345-11500-040.bootrom.ld), it won't run, and just keeps rebooting. Now I've got a really nice doorstop unless someone knows how to get out of this predicament. Help! 0925003705|cfg |3|00|Beginning to provision phone 0925003705|dns |3|00|DNS lookup for 'somedomain.com'(66.16.26.106) TTL=83485 092500...

Hello everyone, Please forgive the exclamation points but I have been battling this one off and on for about four days now. Sorry for the cross post. It all started with a box of IP 501s. I contacted my reseller and obtained the latest BootRom and SIP firmware. Unzipped, configured, copied over to my FTP server (running AstLinux, of course). The phone booted, so far so good. Updated bootrom, nice. Rebooted again. Updated sip firmware. Also nice. Upon the next reboot, the wheels started falling off. The phones would not get ch...

Hey all, Just getting started playing around with my Polycom 600. According to the wiki, it looks like it's recommended to run BootRom 2.6.1 and SIP 1.4.1. Is that info still current, or is it safe to upgrade to 3.0.1 and 1.5.2? Justin --

Received two new Polycom 500 phones. Dhcp and ftp configured properly to load the various files including v2.5.0 bootrom.ld, etc. One of the phones loaded all firmware and config files properly, registers with *, and is usable. The second phone loads bootrom.ld (from the same ftp server on the same wire as the phone), but towards the end of the bootrom.ld load process (about 430 pkts as seen by a Sniffer) the phon...

...s are supported? Doug. -----Original Message----- From: Ken D'Ambrosio [mailto:ken@jots.org] Sent: Tuesday, March 07, 2006 12:12 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] OT: Polycom BootRom 3.1.3 and vsftpd 2.0.3 HTTP's nice, but FTP does the job. Check the docs for supported FTP servers -- many of the stock Linux FTP servers will give the exact problem you discussed, below. I should know -- took me almost a week before trying proftpd, and WHAMMO, worked like a champ. -Ken O...

...ave a question about DHCP and boot server supporting more than 1 model of Polycom phones. According to Polycom "standards", Polycom phone boots up to get a DHCP address and at the same time getting a boot server string (with username and password) to logon to boot server to download SIP, bootROM and etc. That is okay if there is only one type of phone (that requires a specific SIP and bootROM release). What about if the environment has to support two or more models of Polycom phones? On the boot server side, I can define another home directory like /home/polycom1 and /home/polycom2 to...

I've had an IP300 for a while now and it's been working fine. I just got an IP500 and when it connects to the FTP server it downloads the new bootrom and says error loading. The bootrom is fine and works on the 300... In addition, I downloaded a new copy to be sure and it still doesn't work. Can anyone give me some advice?

i recently bought an SP4000 conference phone but having problem provisioning it using ftp, every time it just hangs at "Updating initial configuration..." screen. when i switch it to tftp, it'll work fine. i though it was bootrom/firmware issue so i upgrade it to bootrom 3.2.2/sip 2.0.1 but it makes no difference. any thoughts? p.s. i'm using debian sarge proftpd 1.2.10 and the setting works fine w/ SP501 with bootrom 3.1.2/sip 1.6.3 -- Edwin Lam <edwin@officegeneral.com> Systems Engineer, Office General, Inc....

...te some time. I have eagerly watched each post with like problems but have yet to find a reliable answer. I have a Polycom 501 and I am trying to provision from an FTP server, and just to take any routing out of the issue it is on the same subnet. I am running the 2.0.1.0291 firmware and 3.2.2 bootrom. I set the IP info on the phone and point it at the ftp server. It successfully loaded the new firmware and bootrom but will not provision. Every time it gives me Config file error: The error is 0x0 after the page that says Processing Configuration This may take a minute. Here is my ftp log:...

From what I know this log show everything working Perfect. Then it goes to the Welcome screen then after a long time of processing, it errors out with a 0x10000 error Any Ideas? 1005195711|so |4|00|---------- Initial log entry ---------- 1005195711|so |4|00|+++ Note that bootrom log times are in GMT +++ 1005195711|hw |4|00|Initial log entry. 1005195711|wdog |4|00|Initial log entry 1005195711|cfg |4|00|Initial log entry 1005195711|copy |3|00|Initial log entry 1005195711|cdp |4|00|Initial log entry 1005195711|cdp |5|00|CDP is DISABLED. 1005195711|cdp |5|00|802.1Q/VLAN...

I got em. You want em? Anyone know how I can get these to the site listed on the Wiki? Thanks, Wiley -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050512/dfee13b3/attachment.htm

Hi there, slightly off-topic, but probably of interest on this list. In the meantime there are freely available PXE Bootroms for lots of cards. I'm aware of Intel, 3com and Realtek based cards. I'm still looking for a PXE-Bootrom for Tulip based Cards though! Would be nice to have a List of some sort on the PXElinux homepage. So here is one Link I'm aware of: http://www.realtek.com.tw/downloads/downloads...

...even when I do the "factory reset" (4-6-8-* then 456). I tried using FTP and TFTP, but even though the phone uploads the log, I get these errors: 0927211350|app1 |3|00|Time has been set from 0.us.pool.ntp.org(69.60.124.59). 0927211350|cfg |4|00|Could not get all 512 bytes of the header. 0927211351|cfg |4|00|Could not get all 512 bytes of the header. 0927211422|app1 |4|00|Loaded

...l with Asterisk, thanks to http://www.freedomphones.net/polycom/files The code there is not the most current (and my Polycom Extranet login hasn't gotten updated yet to allow downloads). Been waiting a while for their support folks to update the access. If you know where I can get the 2.5.0 BootROM and 1.3.1 SIP code? Thanks, L.

I am using version 1.4.1.0040 and 2.6.1.0003. I have read about newer versions out there, how can I get them? I'm having an intermittent issue regarding DHCP with one of my phones, and I recall when I loaded 1.4.1 on this one phone, it failed once, then it succeeded the second time. I am wondering if a firmware update will help. Or is there any known issues with Fedora Core 2 dhcpd and IP

I'm attempting to set up my SoundPoint 501 with my Asterisk server. I've configured DHCP and TFTP and successfully updated both the BootRom and SIP application. I've also created a custom cfg file for this phone's MAC address and the settings seem to be taking just fine. I can see that the phone registers with my Asterisk server but 'sip show peers' reports that the phone is UNREACHABLE. This seems to be a problem becau...

...Server Address: 192.168.1.101 Server User: PlcmSpIp Server Password: PlcmSpIp (not sure what it should be) Pro. Method: default I am using tcpdump to watch the network messages, and I see the phone sending messages like: 11:04:50.147597 IP 192.168.1.51.1025 > 192.168.1.101.69: 19 RRQ "bootrom.ld" octet 11:04:58.235875 IP 192.168.1.51.1027 > 192.168.1.101.69: 25 RRQ "0004f21136a1.cfg" octet 11:06:36.728815 IP 192.168.1.51.1029 > 192.168.1.101.69: 25 RRQ "000000000000.cfg" octet I have the following files in the directory /srv/tftp: 0004f21136a1.cfg b...

Hi, HPA: Thanks for the nice new features, appreciate that. Syslinux is always a nice program. For the new version, 3.10-pre20, I encountered a problem now, my client machine uses sis900 chip, and it still can not run simple menu with pxelinux in this version (3.10-pre20). It's same situation as I encountered when I used syslinux 3.07, 3.08 and 3.09. For 3.10-pre20, I compiled in Fedora

I have a couple of Polycom phones, bootrom 2.5.0, SIP 1.3.1.0056. Works great with Asterisk when I power on the phone. However, after some time, say an hour, I cannot receive calls on this phone. On Asterisk, when I do "database show", it does show the phone in there, but it cannot reach the phone. Is there a way to keep alive the...