search for: b100

How can I diagnose why a resilver appears to be hanging at a certain percentage, seemingly doing nothing for quite a while, even though the HDD LED is lit up permanently (no apparent head seeking)? The drives in the pool are WD Raid Editions, thus have TLER and should time out on errors in just seconds. ZFS nor the syslog however were reporting any IO errors, so it weren''t the disks.

...[ Context 'extensions' created by 'pbx_config' ] '.' => 3. Hangup() [pbx_config] '0' => 1. Dial(SIP/jsantacapita|20|Tt) [pbx_config] 2. Voicemail(u100) [pbx_config] 102. Voicemail(b100) [pbx_config] '100' => 1. Dial(SIP/jsantacapita|20|Tt) [pbx_config] 2. Voicemail(u100) [pbx_config] 102. Voicemail(b100) [pbx_config] '101' => 1. Dial(SIP/mthomas|20|Tt) [pbx_config] 2. Voicemail...

...Jet Network Inc. Intel 537 (or 02:05.0 Class 0280: e159:0001) Subsystem: Unknown device b119:0001 But the REV E/F shows up as: 02:0d.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface (or 02:0d.0 Class 0780: e159:0001) Subsystem: Unknown device b100:0003 One is class 0780, one is class 0280. I don't know if this normal, but it might be an indication of the problem. I managed to probe it with zaptel 1.0.8 correctly once after which the box paniced. $ sudo /sbin/modprobe wcfxs zaptel kernel: Zapata Telephony Interface Registered o...

...IO-APIC-level uhci_hcd:usb1 20: 85250811 86274087 IO-APIC-level wctdm NMI: 0 0 LOC: 42898234 42898233 ERR: 0 MIS: 0 lspci -v 00:0a.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Unknown device b100:0003 Flags: bus master, medium devsel, latency 32, IRQ 20 I/O ports at d800 [size=256] Memory at fe100000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 lspci -vb 00:0a.0 Communication controller: Tiger Jet Network Inc. Tiger3XX M...

Okay, I''ve got Mandrake v9.2, and I just got my laptop working with a Dlink 514 router and Zyair B100 card. After getting it to work, I found that I had to stop shorewall before I could actually connect anywhere. So I went into /etc/shorewall and added wlan0 to interfaces and changed zones as well. This seems to work, I can connect now with shorewall running. Was this the right way to add wirele...

...1,Goto(companyx-directory,s,1) exten => i,1,Playback(invalid) exten => i,2,Goto(companyx-aa,s,1) [companyx-cust-svce] exten => s,1,Dial(SIP/companyx103,15,tr) exten => s,2,Dial(SIP/companyx100&SIP/companyx103,15,tr) exten => s,3,Voicemail(u100@companyx) exten => s,4,Voicemail(b100@companyx) exten => s,5,Hangup -- ==================================================== J. Oquendo http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x1383A743 echo infiltrated.net|sed 's/^/sil@/g' "Wise men talk because they have something to say; fools, because they have to...

...wCaller=${CALLERIDNUM}) exten => 08700688nnn,4,SetCIDNum(0${CALLERIDNUM}) exten => 08700688nnn,5,Dial(${TRUNK}/07961106nnn,20,r) exten => 08700688nnn,6,SetCIDNum(${NewCaller}) exten => 08700688nnn,7,Voicemail(u100) exten => 08700688nnn,8,Hangup() exten => 08700688nnn,101,Voicemail(b100) exten => 08700688nnn,102,Hangup() (where nnn is a real number) The sip channel is set to time out quickly for testing. And I don't appear to have the pls-wait-connect-call audio file - but that isn't an issue for the time being... The IAX2/0870nnnnn is the extention/device that calls...

When I use my phone to make VOIP call and another calls comes from POTS my phone rings to POTS caller. Why? Shouldn't it generate busy signal! -- #Joseph

Hi, I had a FWD account set up with asterisk (using SIP) and it was working fine both ways. I switched to IAX2 and now I can't get incoming calls from FWD. People who call my FWD number get a "480 - user is not online" message without any traffic reaching my box. I can call FWD numbers fine over IAX2. It seems fwd isn't trying to place the call over IAX2 because it thinks

...Module 3: Installed -- AUTO FXO (FCC mode) Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules) Registered tone zone 0 (United States / North America) 6. lspci -v shows: 0000:01:07.0 Communication controller: Individual Computers - Jens Schoenfeld Intel 537 Subsystem: Unknown device b100:0003 Flags: bus master, medium devsel, latency 32, IRQ 3 I/O ports at a400 Memory at f5001000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 and nothing else is running on IRQ 3. 7. some errors show up on /var/log/messages interm...

I have the user manual, I'll send it to your email tonight when I'll be in my home. I have an APA III-4FXO too, until today I can't put it to work with asterisk. Kind regards, Miguel Date: Fri, 03 Sep 2004 16:07:59 +1000 From: Jamie Carl <geek@j-code.net> Subject: [Asterisk-Users] Mediatrix APA III-4FXO (or 1204) help. Anyone with user manual? To:

...from one extension to an alternate on the phone. For example: If extension 100 is busy, it will ring extension 120 on the same phone, and if that is busy it will ring 140, and then if it hits line 4 with no response, it will then finally go into voicemail. Could I do: exten => 100,1,DIAL(SIP/b100,20,rt) exten => 100,2,DIAL(SIP/b120,20,rt) exten => 100,3,DIAL(SIP/b140,20,rt) exten => 100,n,Voicemail(b100) exten => 100,s+1,Hangup Would this work? Thanks, ~Dan P.S. Has anyone found resources on how to program the LED's on the SPA-841's?

Folks, I've setup an IVR system that's been running fine (in production) for the last 6 months. It's primarily been used for North American calls. The problem I'm having is that for international calls, DTMF does not work. The tones just don't get detected. I tried a number of different codecs and options, but to no avail. I'm using IAX through my provider. The numbers

Hi.. I noticed all recording activities suddenly stopped. It seems as if Asterisk is unable to manipulate files. Here is a sample of a session in which I dialed the Voice Mail system and tried to record my name: Any ideas? Thanks Executing VoiceMail("SIP/100-69a9", "b100@default") in new stack -- Playing 'vm-theperson' (language 'en') -- Playing 'digits/1' (language 'en') -- Playing 'digits/0' (language 'en') -- Playing 'digits/0' (language 'en') -- Executing VoiceMailMain(&quo...

...e most-often-garbage card from ww.x100p.com, I get the following error after just adding this card to Mini-ITX with a single PCI slot (OS = CentOS 5.4): ============ # lspci -v 03:00.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Unknown device b100:0003 Flags: bus master, medium devsel, latency 64, IRQ 12 I/O ports at a000 [size=256] Memory at e2000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 ============ # cat /proc/interrupts CPU0 CPU1 0:...

Hello Unless I overlooked it, the "Asterisk Reference Information Version 1.6.1.6" at www.asterisk.org/docs doesn't include instruction on how to start Dahdi when used to drive a TDP PCI card (OpenVox A400P with a single FXO module www.openvox.cn/products/show.php?itemid=20&lang=2). I'd like to know... 1. How to start Dahdi manually. Is this the right way? modprobe

...fault) (Echo Canceler: none) (Slaves: 01) 1 channels to configure. DAHDI_CHANCONFIG failed on channel 1: No such device or address (6) ------------- 3. So I ran "lscpi -v": 03:00.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Device b100:0003 Flags: bus master, medium devsel, latency 64, IRQ 20 I/O ports at a000 [size=256] Memory at e2000000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Kernel driver in use: netjet Kernel modules: wctdm, hisax, net...

...th softphones, but I'm having problems to detect hangups on the analog line. Here are the details: -Clone pc with Ubuntu server 10.04 64 bits -Asterisk 1.6 -Openvox A400P, lspci -v says: 01:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Device b100:0001 Flags: bus master, medium devsel, latency 32, IRQ 21 I/O ports at c800 [size=256] Memory at ff0ff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Kernel driver in use: wctdm Kernel modules: wctdm, wcopenpci,...

rc3 is out and now that the dust has settled I'd like to know, whats coming around the corner for rc4? what new tricks or quality improvements are planned? I think I saw somewhere that bit-rate peeling (or was it cascading codebooks) was one of them, also btw I've heard that wavelets was one of the next big things (i think it was usefull because of pre-echo correction) but that it would

With a data frame (call it *d*) composed of 2000 individuals and *n*observations for each individual (thus *2000n* observations in total), I would like to generate *k* bootstrap samples with replacement from *d*. Amongst other variables, *d* has a numeric variable *id* taking on identical value for observations belonging to the same individual. Taking into consideration the panel nature of the