search for: auxcurrent

...I/O behind bridge: 0000f000-00000fff > Memory behind bridge: e4000000-e6ffffff > Prefetchable memory behind bridge: fff00000-000fffff > BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 10) > Subsystem: VIA Technologies, Inc.: Unknown device aa03 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASn...

...Latency: 16 (4000ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at a400 [disabled] [size=8] Region 1: Memory at f4004000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME+ 01:08.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02) Subsystem: Cologne Chip Designs GmbH ISDN Board Control: I/O- Mem+ BusMaster+ SpecCycle...

...8] Region 1: I/O ports at 20ec [size=4] Region 2: I/O ports at 20c0 [size=8] Region 3: I/O ports at 20e8 [size=4] Region 4: I/O ports at 20a0 [size=16] Region 5: Memory at d02c4000 (32-bit, non-prefetchable) [size=1K] Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ata_piix This is the hardware on the non-working system: 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 (prog-if 8f [Master SecP SecO PriP PriO]...

...Region 1: Memory at d2101000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 5000 [size=32] Region 3: Memory at d2100000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0 +,D1-,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 0a:0a.1 Bridge: Oxford Semiconductor Ltd OX16PCI954 (Quad 16950 UART) function 1 (8bit bus) Subsystem: Oxford Semiconductor Ltd: Unknown device 0000 Control: I/O+ Mem+ BusMaster-...

...gt;TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [88] Subsystem: Dell Device 04a3 Capabilities: [80] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee00438 Data: 0000 Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0...

Hi, I'm new to asterisk, in order to enable X-lite to make a call, what should i do before making a call? Current stage, 1. i have create a few accounts in sip.conf. 2. Registration are successful. Pls advice me how to continue then... Thanks _________________________________________________________________ Personalize your Live.com homepage with the news, weather, and photos you

...Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M] Region 1: Memory at ec000000 (32-bit, non-prefetchable) [size=512K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3ho) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02) (prog-if 00 [Normal) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Ste- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr-...

Greetings, I am resending this as it doesn't appear in the archives and no one responded...maybe it got routed to /dev/null or something :-) I have asked this question the Scientific Linux mailing list (a few months ago) and got the suggestion I talk to the kernel guys. I pinged a kernel guy I know, and his suggestion was to ask the Nouveau list. So here I am. :-) I have had my work laptop

...Latency: 32 (250ns min, 32000ns max) Interrupt: pin A routed to IRQ 201 Region 0: I/O ports at b800 [size=256] Region 1: Memory at feaff000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA PME(D0 +,D1-,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:03.0 Class 0780: e159:0001 Subsystem: 8086:0003 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2...

...SEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at f900 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:10.1 0c03: 1106:3038 (rev a0) (prog-if 00 [UHCI]) Subsystem: 1462:7253 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: C...

...SEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 21 Region 4: I/O ports at f900 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:10.1 0c03: 1106:3038 (rev a0) (prog-if 00 [UHCI]) Subsystem: 1462:7253 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: C...

...ast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold- ) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [60] Express (v1) PCI/PCI-X to PCI-Express Brid...

...Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [e0] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Advanced Error Reporting <?> Capabilities: [150] Access Controls <?> Capabilities: [160] Vendor Specific Information <?> 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/...

...SERR- <PERR- >> BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- >> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- >> >> Capabilities: [40] Power Management version 2 >> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold- >> ) >> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- >> >> Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ >> Address: 0000000000000000 Data: 0000 >> Capabili...

...rgin: Normal Operating Range, > EnterModifiedCompliance- ComplianceSOS- > Compliance De-emphasis: -6dB > LnkSta2: Current De-emphasis Level: -6dB > Capabilities: [e0] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- > UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-...

Hello, A user (cc'd) reported that nouveau's enabling of MSI causes the card to not work on his setup [1]. I think the situation is that MSI is just not supported by the underlying motherboard, even though the card, and probably bridge, support it just fine. It's a very old board. The nouveau code does: pmc->use_msi = pci_enable_msi(device->pdev) == 0; Does it need to do more

...Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 90 Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 2000 [size=32] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable+ Address: 00000000fee01000 Data: 405a Capabilities: [e0] Express Endpoint IRQ 0 D...

...Latency: 64 (250ns min, 32000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at 7000 [size=256] Region 1: Memory at e4001000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Hope this helps. PS It's interesting to see the difference between this and an older X100P: 00:0a.0 Communication controller: Motorola: Unknown device 5608 Subsystem: Motorola: Unknown dev...

...;TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at ddb8 [size=8] Region 1: Memory at fcefa000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- ------ cut -------- Anyone has any ideas? -- Best regards, Henrik Woffinden

...t- <MAbort- <SERR- <PERR- > BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0+,D1+,D2-,D3hot+,D3cold- > ) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [60] Express (v1)...