search for: ata286

Hi people, I would like to read your suggestions as to where the issue might be. ATA286=Grandstream Budgetone ATA 286 in SIP mode. One Lan Port and one FXS port. TDM04B= 4 FXO signal fxls There is a 8FXO-to-SIP unit in this scenario that works perfectly so i will not make mention of it. PSTN----VOIPprovider---Internet---ATA286------tdm04b---Asterisk1.2.-13 Asterisk is being used as...

Hello everybody, when I upgraded from RC1 to RC2 I didn't had any audio between my ATA286 and H323 EP (my post from 13/08/04) I checked further and discover that problem is with ATA286 who is unable to call. I always get an 404 error. Coming back to RC1 everything works fine again. I tried to modify my dtmfmode from rfc2833 to info but in change nothing. Local call to asterisk are...

Hi, the new Grandstream release for the ATAs allows the setting of the FXS impedence, the Onhook Voltage and the Polarity Reversal. Anyone know how these should be set in Germany? -- Best regards Peer Oliver Schmidt

A BETA firmware upgrade toasted my ATA286. It now has limited operations. It will get an IP address via DHCP and register to the last configured SIP server, but the web interface is gone as is the voice config menu. Apart from registration, there doesn't appear to be any other SIP functionality. An Ethereal dump does not show the de...

Hi list, would like to know if some of you have tested asterisk connected to an EADS 6550 analogique PBX (also know as Nexpan50). Our set up is a Dell Optiplex with 1 TDM400 4 FXO, 1 TDM400 4 FXS, (no other card, each of them have their own IRQ) all ports connected to the EADS. We have GS ATA286 as EP. Calling from ATA to ATA give a perfect sound. Calling to PSTN numbers or reverse side, give echo. We can do what we want in zconfig.h (STEVE2, MARK2, MMX, AGGRESSIV_SUPPRESSOR, NOECHOCAN_DISABLE) or zapata.conf (tx gain=-10.0, echocancel=32 ... 256,), test with differents POTS phone, it...

How do I match by username instead of by host/ip? By default this is how it should work, but it does not. we do not have insecure turned on. Matt

Hi, I am building for a customer an * solution that will use 2 Digium cards. 1 x TE110P (T1 ISDN PRI) 1 x TDM40B (4 analog ports, 2 for faxes, 2 for extensions) The system will be connected to the PSTN through the T1 ISDN PRI interface. All customer extensions will be SIP phones except 2 fax machines that will use the analog FXS ports on the TDM40B card. I have been investigating on this

Hi, Anybody here from the UK using Asterisk at home? I'm looking for a SIP phone which will work with Asterisk and not leave me broke! I got one of the Tecom ones from Solwise but it refuses to login to Asterisk server for some reason. May have to send it back. What are the other options please? Thanks Mike

Hi, I've had a bunch of people asking about purchasing GS phones. I'm happy to announce that we now have an online purchase system available. We have: BT-101 BT-102 HT-286 Plus the full line of Digium hardware. We will be adding other products in the near future so check back :) Buyers are responsible for s/h costs. The URL for the phones is:

Perhaps stupid question but, is Asterisk a statefull or stateless proxy? Ignace

Looking for WLAN - WiSIP - WiFi phone recommendations and experiences. What works, what doesn't. Thanks. Jim James H. Thompson jht@lava.net -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040716/2e0d45a5/attachment.htm

...EAD-09/08/04, spandsp-0.0.1k, X100P (Tiger Jet Network Model 300 128k), kernel 2.4.26 on an SMP SoftRaid machine (2x400Celeron 400) and 448 MB RAM. I tried the same kernel without SMP. I tested with a HP OfficeJet 490 as well as with Hylafax-server/#ComUSR 56k faxmodem, both connected to an BT ATA286 and answered by my * box. Page is A4 on HP, and for Hylafax, I just send the faxcover. Everything is fine and then starting at scanline 1287 (changing from test to test but always around scanline 1200) [...] Fax3Decode1D: Warning, (FakeInput): premature EOL at scanline xxxx ( got xxxx, expecte...

Hi, I am currently trying to find a replacement for a dinosaur PBX and want to replace it with a VoIP solution. We have just moved our lines over to an Optus Multiline from a Telstra ISDN Onramp 30 service with 100 lines. My question for you good people is what sort of hardware do I need to interface Asterix into the Optus Multiline? The Optus service is terminated in my office to a SHDSL

I thought I'd post my experiences for the benefit of anyone else who may be at the point I was when I first started with asterisk. I have 2 incoming analog lines (north eastern U.S., Verizon) where one is set to ring if the first is busy. I bought a bare-bones system from abs-pc with the following components: POWER SUPPLY 450W ALLIED ATX450P4 R(41) MB NFORCE2 A7N8X DELUXE ASUS RTL(Standard)

I have upgraded my grandstream phone from firmware 1.0.3.78 to 10.0.4.30 and now I am having problems with early dial. On the older firmware earlydial worked fine with my asterisk server, but now as soon as I have dialed the number I get a congested tone, and the number 4 flashes up on the LCD screen. Has anyone had this problem, and if so, how do I fix it? -------------- next part

Today class we are going to be talking about the wonderful line of GrandStream products. Or should I say BarbieTone phones? Who else is having MAJOR issues with the grandstream products? How many times have you been told upgrade upgrade upgrade? How many of you have paperweights, granted the phone is light as a feather and couldn't weight papers down in the first place? How about that