search for: ata186

Hi I have a brand new ATA186 with the following firmware: Version: v2.15.ms ata186 (Build 020919a) I have been through the archives about how to configure it, but my colorful configuration web page does not have the same fields that people say I need to adjust. Even the examples on Cisco's web site don;t match. For...

Hi All, I'm looking at getting some Cisco VoIP hardware to play with in combination with a Asterisk server. I've heard that there is beta software available to do SIP on the 7905G. So, I'm thinking of either getting a 7905G or a ATA186. My dillema is, which one to buy? I can get both for about the same price, has anyone had any experience with using a 7905G with Asterisk? On one hand it would be useful to have a ATA186 for its two ports, might be useful for testing stuff (Can you call between the two ports on a ATA186 ok?)....

Hi, I'm away at a conference in Amsterdam. My home is in Cambridge in the UK. On a whim, I tossed an ATA186 and a phone into my bags before leaving home. I was able to plug my ATA186 into a LAN here at the conference and was connected to my home Asterisk in a few seconds. Total time from unzipping my bag to talking to home no more than 15 seconds. OK, so the kit could be more portable, but that is com...

Guess who's here to do an Asterisk demo this week without the power supply for his SPA-841. I have an ATA186 with me. Both phones use a 5v supply. Does anyone know whether the supplies are interchangeable? Thanks in advance; sorry for the noise. B.

Hi all: I'm testing a new installation of *, bringing up some ATA186. In * environment, all stuff works greats. The only thing that don't work is a Call Transfer, but the 3Party works ok. Some time ago I read that somebody had proven this functionality successfully. If somebody knows what I missing, please let me know. Thanks in advance, Gus -------------- ne...

I have a Vonage acct that uses the Cisco ATA186. Currently, I have the ATA186 plugged into a SPA3000 to act as the FXO port. I installed a X100P card with the idea of replacing the SPA3000. Now, when I plug in the ATA186 into the X100P card and make a call into the system (from cell phone) and hangup when the IVR is playing, Asterisk is n...

Hello: I have problems sending dtmf signal to an ATA186 my configuration is: ATA186 --> asterisk --> ATA186 --> FXS to FXO Converter --> PSTN The ATA186 are set to send dtmf RFC2833, but it seems that the ATA186 can't generate dtmf so I can dial to a PSTN number. Is there a setting that can fix my problem, inband dtmf does not work...

...nologia de la Informacion. racosta@moanickel.com.cu Tel:(53)(24) 62 611 -----Mensaje original----- De: Paul Rodan [mailto:asterisk@glitch.cc] Enviado el: Martes, 23 de Noviembre de 2004 11:24 a.m. Para: 'Asterisk Users Mailing List - Non-Commercial Discussion' Asunto: RE: [Asterisk-Users] ATA186 V2.15.ms You probably aren't running SIP firmware. You'll have to upgrade it first. -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Rodney Acosta Coya Sent: Tuesday, November 23, 2004 11:54 AM To: '...

I am trying to do a "factory reset" of an ATA186 using the widely-available instructions (basically dialing "FACTRESET#" on the keypad while at the menu prompt). I have done this a number of times before with success, but on this unit the lady spells out "P A S S W D" when I finish up the entry. Does anyone know what to d...

Hi, I'm having trouble getting caller*id to appear on my phone connected to an ATA186, and being called from Asterisk. Does anyone out there successfully see callerid on their ata186-connected phone? The "From:" header in the INVITE to the ATA seems to have the "right stuff" - eg From: "Study phone" <sip:6002@195.217.255.45:5062>;tag=as412db...

Hi, I saw your posting about the cisco ata186 I2 vs I1 and the simple vs complex impedance. I ordered a cisco ata186 i2 for use in Canada by mistake, didn't know that I needed the I1 version. Will the I2 version work in Canada with regular anlog phones, or will I need to change it. Thanks for your answer. Samy -------------- next part -...

-----BEGIN PGP SIGNED MESSAGE----- Greetings, I've just about got Asterisk up and running and am wondering the following. Currently, I subscribe to both Vonage and Broadvoice and as such, I've got a Sipura and Cisco ATA186. Although I'm sure this is expressly prohibited somewhere in my service agreements, can I reprogram these devices to access my own asterisk server rather than their respective providers? I understand that Vonage started password protecting some of its ata186s, but am hoping the Sipura provide...

...ink I'm getting closer with the asterisk connection. This is my setup and I keep getting this error below in ,my /var/log/asterisk/messages file. I have opened 5060 port on the firewall box. I would this is Warning which I can ignore! But I see the connetcion coming but NO DIAL TONE on mt ata186 box sitting in my 192.168.200.x site! I'm using ATA186(cisco adapter) at my 192.168.200.x site Xten soft sip cient in 192.168.100.x site ASTERISK running on my GW towards the 192.168.100.x site. 192.168.100.x |(asterisk GW)| public IP ----- INTERNET ------ public IP | 192.168.200.x Jun 26 2...

I have done my homework on this, I hope. I have a customer with an ATA186 who uses Nufone as his IAX provider. His network operations center in the Bahamas was destroyed by the hurricanes, and I'm helping him rebuild. We have a nagging problem getting his ATAs (located in public IP space) to talk through his IAX provider (Nufone) to the outside world. As far as...

I've been trying to use net2phone's sip service at sip.net2phone.com with * but keep getting SIP/2.0 401 Unauthorized. Do you know if this should be possible? So far: I can use an ata186 to connected directly to n2p through sip.net2phone.com without any special settings. I can connect from * to iconnecthere, but, whatever I try from * to n2p produces "SIP/2.0 401 Unauthorized" (Can forward the full * sip log and ata186 log if it would help) Many thanks Mark ----------...

I tried putting this as the ata's dailplan: *St4-|#St4-|9|^9t4>$.- this is sip.conf [ata2001] type=friend username=ata2001 secret=SoMeSeCrEt host=dynamic context=fromata canreinvite=no and this in extensions.conf [fromata] ignorepat => 9 exten => _91700NXXXXXX,1,Dial(IAX2/${IAXINFO}@iaxtel.com/${EXTEN:1}@iaxtel) exten =>

Friend of mine in the UK setting up an asterisk box is looking for an ATA186 source in the UK. Anyone who knows of one, please email me offlist. -- William Walsh <william at wxw.org> Jabber: william at wxw.biz

I know I've seen this reported already, and I can't remember the fix. I have two ATA186s talking to an asterisk server. When I call in on an outside line, both ring, and I can pick up either and talk. But if I try to call from one of them to the other, the remote end rings just fine in both cases, but then as soon as asterisk bridges the two channels, the remote end sends a &quot...

This deal has got me confused. My dial plan rings my ATA186 on all incoming calls. If I don't pick up, it goes to voicemail. Under either of those circumstances, the callerid screen on my phone stays blank, and the message waiting indicator does NOT come on. But anytime a call comes in for me while I'm already talking on the phone, BOTH of tho...

I wonder if someone out there could loan me a peek at their sip.conf? I have conflicting advice, for instance, about whether or not to use "nat=1" and also whether or not the ATA should be registering with the instance of asterisk it is going to be using to dial out. Thanks in advance. B.