search for: apc

...t; these include Ganglia, Nagios, KSysguard and a file-logger (amongst others). interesting though I've not had time to investigate more. I've just added a new entry on the client projects page. Thanks for your work on this point. > As an aside, I've configured NUT to talk to our APC-8000[3], which comes with > an "AP9619" [4] expansion card. This card has an external temperature probe, > but it doesn't seem to appear in the variables NUT returns: the UPS's > internal temperature is mentioned, but no "ambient.temperature.measured". &...

Hello!! I am a new user to puppet and I need to use puppet to install apc and change the size of apc.shm_size to 64. I have found a module here: https://github.com/ridonkulous/puppet-apc However, when I add the module in, it does not work. I get errors on the puppet code. Is there a way to just install the apc package normally and just use puppet code to change ap...

I have an APC Back-UPS CS 500 which connects via USB. I am running NUT 2.4.1 under Karmic amd64. The entry in ups.conf is [apc] driver = usbhid-ups port = auto desc = "APC Back-UPS CS 500" I left upsd.conf at the default values, nut.conf is "mode standalone", and in upsmon.conf, the monitor...

...Late last week I had to buy a UPS under time pressure. The Eaton unit >> that thus project gifted me with in 2006(?) died during a severe >> thunderstorm watch, so it was off to MicroCenter to get a replacement >> pronto. >> >> I wound up buying an APC BN700MC. It was what they had in the >> performance range I needed. The removable battery door was pleasing. >> > > > >> Based on the experience, I have updated the UPS HOWTO: >> >> http://www.catb.org/esr/ldp/UPS-HOWTO.html >> >>...

Hi, Perhaps as you know it Schneider Electric acquired APC, which involves the combination of APC and MGE. http://www.apc-mge.com MGE is an important contributor for NUT with for example Arnaud Quette, it's does not that the MGE strategy for the free software is stopped by Schneider Electric or APC. It is the good moment to make pressure on Schnei...

I was testing out newhidups with an APC UPS, and I noticed that I needed '-x vendor=American.Power.*' instead of '-x vendor=APC.*' as indicated in the man page. Do other APC USB UPSes use 'APC' in the vendor string? Should we sidestep any such problems and just go with the hex vendor ID for APC examples? This wa...

...xe, version 0.0.0.0, fault address 0x0000458f. I try use another server, on 32-bit all is ok. Problem only on x64 platform (maybe in libusb)? And no different - upsmon master or slave. C:\Program Files (x86)\NUT\sbin>upsmon.exe -DDDD Network UPS Tools upsmon 2.6.1-3057:3116M 0.000000 UPS: apc at 192.168.4.8 (slave) (power value 1) 0.015625 Using power down flag file C:\killpower 0.015625 debug level is '4' 0.015625 Trying to connect to UPS [apc at 192.168.4.8] 0.078125 Logged into UPS apc at 192.168.4.8 0.078125 pollups: apc at 192.168.4.8 0...

Hi gang, I have the APC BR1500LCD [1] and would like to know if NUT can handle it. The compatibility list [2] does not show it but I thought that perhaps it would fit in as some other unit. Does anyone else have this unit? [1] http://www.apc.com/resource/include/techspec_index.cfm?base_sku=BR1500LCD [2] http://www.net...

Hi All, About a month ago APC announced they were including MODBUS protocol support in their new APC UPSes. The technical note on this is here: http://www.apcmedia.com/salestools/MPAO-98KJ7F/MPAO-98KJ7F_R0_EN.pdf "Application Note #176 Modbus Implementation in APC Smart-UPS" The APC "announcement" appe...

Hi there, Seeing an odd behaviour when running upsmon -c fsd to test my Raspberry Pi (running Jesse Lite) setup as a upsmon master, attached via USB to an APC Back-UPS XS1300. The Raspberry Pi is plugged into the Master outlet on the APC. The UPS clicks onto battery (and the fan spins up) for a few minutes, then resets, then repeats again, while finally remaining on AC power afterwards. The result is that my test ESXi server never quite boots up, befo...

Hello, I use the following in my ups.conf: # USB: [apc] driver = usbhid-ups port = auto desc = "APC 1500VA" pollfreq = 5 On my new motherboard (an Intel DP55KG), every once and awhile I get this: Broadcast Message from nut at box.com (somewhere) at 17:48 ... Communications with UPS apc at localhost lost Broadcast Mes...

Hello, I'm using driver newhidups with APC Back-UPS CS 500. Most things works fine except the following: After I disconnect the UPS the upsd write "Data for UPS [apc] is stale - check driver" in /var/log/messages. In the same second it tells "UPS [apc] data is no longer stale". This repeats all the time the ups is disco...

I have an APC SMX3000RMLV2UNC UPS, with installed network card model AP9631. http://www.apc.com/resource/include/techspec_index.cfm?base_sku=SMX3000RMLV2UNC http://www.apc.com/resource/include/techspec_index.cfm?base_sku=AP9631 I planned to use network connectivity with this unit and apcupsd, but have not this...

Hello Ted, 2013/9/11 Ted Mittelstaedt <tedm at mittelstaedt.us> > Hi All, > > About a month ago APC announced they were including MODBUS protocol > support in their new APC UPSes. The technical note on this is here: > > http://www.apcmedia.com/**salestools/MPAO-98KJ7F/MPAO-**98KJ7F_R0_EN.pdf<http://www.apcmedia.com/salestools/MPAO-98KJ7F/MPAO-98KJ7F_R0_EN.pdf> > > "Appl...

Greetings: I've been following through the instructions on how to connect an APC BackUPS 650 ES to USB, and have it monitored with NUT... I know my system can SEE the UPS, as DMESG shows this: hiddev96: USB HID v1.10 Device [APC Back-UPS ES 650 FW:818.w1.D USB FW:w1] on usb-0000:00:04.2-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core dr...

Hello, I can get nut to work with this UPS using the apcsmart driver, but only with limited functionality. It is only reporting the OL/OB status and that's about it. None of the other useful variables such as run time, load etc are reported and initiating battery tests does not work either. Has anyone managed to get nut to report more than thes...

Hi Guys, I'd like to submit a patch to enable NUT to communicate with APC 5G UPSs. The current usbhid-ups driver recognises APC UPSs by the Vendor ID and Product ID of 0x051D and 0x0002. This needs to be amended with the new Product ID of 0x0003. (See attached file: apc-hid.patch) Secondly, when Nut polls the UPS via the interrupt channel, these will time out, resulti...

On Dec 17, 2014, at 3:46 AM, Frantz de Germain <frantz at info.univ-angers.fr> wrote: > This seems to me a little bit complicated :-( Instead, can I use the > apcsmart driver with the provided 940-0625a c?ble (RJ45/DB9 connectors) ? Or > do I need to acquire an AP9620 SmartSlot expansion card, as I've seen in the > Hardware compatibility list page ? It sounds like you might need the AP9620: http://news.gmane.org/find-root.php?message_id=512C53...

W dniu 22.08.2018 o 14:41, Charles Lepple pisze: > /lib/nut/usbhid-ups -a apc -DDD -k Please see attachement. -- Karol Olszewski ipflow.pl -------------- next part -------------- A non-text attachment was scrubbed... Name: APC_BackUPS_CS_650_fsd.log.gz Type: application/gzip Size: 5735 bytes Desc: not available URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/...

> Also, I don't think we have any confirmation of the variables that the AP9620 provides. Here is the list of full 'upsc' output for various APC models: > > http://buildbot.networkupstools.org/~buildbot/cayman/docs/latest/ddl/APC/index.html Frantz, Actually, it would be useful if you could send a copy of the output of 'upsc', 'upscmd -l' and 'upsrw' for your UPS. (If you prefer to mask out part or all of t...