Hello mailing List. I manage 2 UPS via NUT, an APC Smart-UPS_1500 and an ?EATON 5S 1500. I can get load information on the EATON but not on the APC. Actually upsc doesn?t give much information on the APC. Does someone know whether this is a driver limitation or a configuration issue ? Many thanks for your views. Laurent PS: my goal is to monitor the UPS and raise alarms if upsc detects issues and shutdown the servers if the UPS is on battery and battery load goes to the limit. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://alioth-lists.debian.net/pipermail/nut-upsuser/attachments/20240524/c4d7bff3/attachment.htm>
Laurent Taieb via Nut-upsuser> > Hello mailing List. > > I manage 2 UPS via NUT, an APC Smart-UPS_1500 and an EATON 5S 1500. > > I can get load information on the EATON but not on the APC. > > Actually upsc doesn?t give much information on the APC. > > Does someone know whether this is a driver limitation or a configuration issue ?if you can not get load via usb cable, maybe you need to enable modbus and use serial cable with apcupsd. then use apcupsd-ups driver to do what you want.
d tbsky <tbskyd at gmail.com>> > Laurent Taieb via Nut-upsuser > > > > Hello mailing List. > > > > I manage 2 UPS via NUT, an APC Smart-UPS_1500 and an EATON 5S 1500. > > > > I can get load information on the EATON but not on the APC. > > > > Actually upsc doesn?t give much information on the APC. > > > > Does someone know whether this is a driver limitation or a configuration issue ? > > if you can not get load via usb cable, maybe you need to enable modbus > and use serial cable with apcupsd. then use apcupsd-ups driver to do > what you want.sorry. after checking https://www.apc.com/africa/fr/faqs/FA402663/ SMC series has no modbus support. there is currently no microlink support under nut or apcupsd.