search for: adcom

...puppetd --verbose --debug --trace --no-daemonize -- server hostname.domain --certname hostname.domain Post the results back. Are you on IM or IRC? ++++++++++++++++ Below is the results after running (meteor) root:/opt/csw/bin # ./puppetd --verbose --debug --trace --no- daemonize --server core4.adcom.uci.edu --certname core4.adcom.uci.edu debug: Creating default schedules debug: Failed to load library ''ldap'' for feature ''ldap'' debug: Failed to load library ''shadow'' for feature ''libshadow'' debug: /Settings[/etc//opt/csw/pupp...

Hello All, Has anyone configured bri to answer for only one msn? In essence, when the primary is busy I want to have channel 2 ring. I am using an eicon diva server bri I know I saw it in the windows interface, but don't see it in the linux setup. Regards, Greg

Hello All, I recently put in a zaptel 1fxo/1fxs card. I am experiencing heavy static. Even with the pots line disconnected, if I do a dial I still get static. This way I know it's not the line, but rather something on the card. I tried alternate pci slots. This card has a power connector, does anyone know what the power requirements are? The unit is in a small case with a 2.4ghz p-4 and

I'm looking to use Asterisk with Verizon ISDN centex service in the US. I'd be connecting to an NT1 so I'd need an S/T interface. Users would have SIP phones registered with Asterisk and sharing the ISDN lines. The only PCI ISDN card that will support ISDN signalling in the US seems to be the Eicon Diva Server cards. These are hard to find and very expensive ($2500 for the Quad

*//* Hi Denis, Il 06/02/2018 20:05, Denis Cardon via samba ha scritto: > Hi Massimo, > >> Il 05/02/2018 16:41, Rowland Penny ha scritto: >>> On Mon, 5 Feb 2018 16:01:27 +0100 >>> "Massimo Donato - Adcom.it via samba" <samba at lists.samba.org> wrote: >>> >>>> */Hi all, >>>>      after a couple of year of successfully working samba AD DC is >>>> not possible to add workstations to domain >>>> since a few day ago in windows i get a...

*//* Il 05/02/2018 16:41, Rowland Penny ha scritto: > On Mon, 5 Feb 2018 16:01:27 +0100 > "Massimo Donato - Adcom.it via samba" <samba at lists.samba.org> wrote: > >> */Hi all, >>    after a couple of year of successfully working samba AD DC is >> not possible to add workstations to domain >> since a few day ago in windows i get a messagge complaining that the >> a...

-----Original Message----- From: Gregory Wiktor - ADCom Corp. Sent: Monday, May 16, 2005 5:40 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Static on TDM Zaptel FXO Hello, Yes in the bios I set unused irq's. Zttest is sporadic. This is a non HT cpu, on a standard ide drive. It is basicall...

Repost, first one never made it to the list... -----Original Message----- From: Gregory Wiktor - ADCom Corp. Sent: Thursday, September 29, 2005 3:20 AM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: Voice Prompts, what do you think? Good voice. Should we record a new prompt-set? Hello all, I have someone working for me who has a nice phone voice. I looked at some a...

Hi to all, *//* Il 07/02/2018 14:45, Massimo Donato - Adcom.it via samba ha scritto: > *//* > Hi Denis, > > Il 06/02/2018 20:05, Denis Cardon via samba ha scritto: >> Hi Massimo, >> >>> Il 05/02/2018 16:41, Rowland Penny ha scritto: >>>> On Mon, 5 Feb 2018 16:01:27 +0100 >>>> "Massimo Donato - Ad...

*/Hi all,    after a couple of year of successfully working samba AD DC is  not possible to add workstations to domain since a few day ago in windows i get a messagge complaining that the account previously exists. ant that to try access with a different account. after some investigation i found that the backupDC  was in hardware fault. the primary seems to work great, but still unable to add

I'm having issues with echo. My setup is Polycom IP501 phones connected to an Adit 600 via T100P. 13 Lines going to the Adit. All echo so far is on the local side (Employees hears own voice, but only on some calls). Watching the channel with ztmonitor, I notice that TXGAIN is pegged out most of the time. RXGAIN is anywhere between 45 and 60%. Is it safe to assume that playing around

Hi Massimo, >>> >>>> Il 05/02/2018 16:41, Rowland Penny ha scritto: >>>>> On Mon, 5 Feb 2018 16:01:27 +0100 >>>>> "Massimo Donato - Adcom.it via samba" <samba at lists.samba.org> wrote: >>>>> >>>>>> */Hi all, >>>>>> after a couple of year of successfully working samba AD DC is >>>>>> not possible to add workstations to domain >>>>>>...

On Mon, 5 Feb 2018 16:01:27 +0100 "Massimo Donato - Adcom.it via samba" <samba at lists.samba.org> wrote: > */Hi all, >    after a couple of year of successfully working samba AD DC is > not possible to add workstations to domain > since a few day ago in windows i get a messagge complaining that the > account previously exists...

Hi Massimo, > Il 05/02/2018 16:41, Rowland Penny ha scritto: >> On Mon, 5 Feb 2018 16:01:27 +0100 >> "Massimo Donato - Adcom.it via samba" <samba at lists.samba.org> wrote: >> >>> */Hi all, >>> after a couple of year of successfully working samba AD DC is >>> not possible to add workstations to domain >>> since a few day ago in windows i get a messagge complaining...

Hello Everyone, I am trying to find a single port isdn pci card in the usa for asterisk, but it seems everything is abroad. Does anyone know a good place to find a BRI S/T and U card for north america? Thanks, Greg

Hello All, I am having an odd problem with Armin's chan-capi_cm on builds higher than 7955. It would seem that this happens on anything higher than 7955. What is happening is the isdn is ringing, then asterisk does a goto-if and just hangs. Asterisk itself is ok, but the isdn then rings out or busys out on the other side. Outgoing works fine, this only seems to effect incoming. I

Hello Armin, > The card is telling: > > CAPI INFO 0x34a2: No circuit / channel available > > so the other channel must be in use by something else. > Maybe another device on the ISDN line? > I have tested it several times now and always entered "capi info" before and after the call. The answer was always: Contr1: 2 B channels total, 2 B channels free. I'm

Hi Nitesh, Take a look at this http://www.microappliances.com/site/html/index.php?section=Products&page =clienthowto.php I've never implemented it though so I would appreciate some feedback on if it works. Cheers, Dean -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Nitesh Divecha Sent: Saturday,

Hello All, I am looking for a sip phone that is capable of automatic nat. The Cisco ata186 for example works fine for natting with iconnecthere, but as for asterisk, both my 7960 and polycom ip600 require you to set the nat ip on the tftp. Does anyone know a good phone (or ata) that can do this automatically? For example, I want to give a phone to my brother, who is going to europe. His ICH

Hi, I recently got a TDM04B and after installing and getting asterisk up and running I connected a handset to one of the ports. Unfortunately I don't get a dial tone when I lift the handset. What could be the cause of this? Could someone point me in the direction of a proper config for a TDM04B? Thanks.