search for: 5115

I've got some strange problem with NUT on my 5115 on Debian Etch: ---snip--- $ sudo ./bcmxcp_usb -DDDDDDD -a 5115 Network UPS Tools - BCMXCP UPS driver 0.13 (2.3.0-1181) Warning: This is an experimental driver. Some features may not function correctly. debug level is '7' Can't set POWERWARE USB configuration Unable to find POWERWAR...

During the last month, I've been integrating a Powerware 5115 into an embedded system by writing a custom NUT daemon. This work has gone quite well and NUT has been very helpful, but it sure would be nice to have some additional instcmds for the 5115. The bcmxcp driver comments mention "manuals for the BCM/XCP". I'm wondering if I could get a...

Hi Georg, > one question with regard to a Powerware 5115 UPS connected to a Debian 3.1 > Sarge box via USB: I downloaded and compiled nut 2.0.2 but I am unable to > configure the USB subsystem so that upsdrvctl recognizes the UPS. > > My /usr/local/ups/etc/ups.conf contains: > > [bla] > driver = bcmxcp > port = /dev/usbdev...

Hi. I'm using ubuntu 10.04 and I'm in the process of buying a ups. This is it (eaton 5115 ups) with usb interface http://powerquality.eaton.com/05146561-5591.aspx?CX=3 I had a look at the ups compatibility chart here: http://www.networkupstools.org/stable-hcl.html But I can't find this particular ups listed. I plan to use NUT v. 2.4.3 that I can get from the repositori...

I'm running Solaris 11 Express (snv_151a X86) with NUT 2.6.0 compliled from the source tarball and a Powerware 5115. I was seeing the driver hang, so gave it some '-D's (23 apparently ;-) and found that it seems to be getting into an infinite loop when reading data from the UPS. The debug output is attached and I would be very grateful for some help or advice on what to try next. Thanks, Rupert ------...

...Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 20 Device Status: 0x0000 (Bus Powered) ************************************ /etc/udev/rules.d/90-nut-ups.rules # Eaton 5115 ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="06da", ATTR{idProduct}=="0002", MODE="0660", GROUP="nut" ************************************ ************************************ Issuing command root at laptux:~# upsdrvctl start Networ...

Hi all, I know there are some howto's about Powerware 5115 and Ubuntu, but I can't still get that thing working. Can someone give some light... 1. Powerware 5115, serial port (ttyS0) 2. Ubuntu 6.06.1 as LTSP-server As reference: http://gentoo-wiki.com/HOWTO_NUT http://keystoneit.wordpress.com/2006/09/25/network-ups-tools-nut-on-ubuntu/ --- a. I...

Hi all, I know there are some howto's about Powerware 5115 and Ubuntu, but I can't still get that thing working. Can someone give some light... 1. Powerware 5115, serial port (ttyS0) 2. Ubuntu 6.06.1 as LTSP-server As reference: http://gentoo-wiki.com/HOWTO_NUT http://keystoneit.wordpress.com/2006/09/25/network-ups-tools-nut-on-ubuntu/ --- a. I...

I am seeing some problems when using the Powerware 5115 UPS when connected to the Patsburg USB controller and would like to know if anyone has a solution. The symptom is that PING messages sent to the bcmxcp_usb driver take as long as 25 seconds to complete. The configuration is a Romley patform (a.k.a., Sandy Bridge + Patsburg) running Debian 6 with...

...See upsdrvctl(8) and ups.conf(5). Fatal error: unusable configuration CLOSING Driver failed to start (exit status=1) ==================================================================== My ups.conf looks like this user=admin [PowerWare] driver = bcmxcp_usb port = auto desc = "PowerWare 5115 UPS" #pollinterval=1 baud_rate = 9600 I have tried various configurations but nothing seems to work. Once I receive this error I need to disconnect and reconnect the USB cable to get any further. Is there anything I can try? UPS work correctly on a Windows Vista/2008. Over the next few d...

Hello. I've tried to configure Windows (complete port, Beta): Windows MSI installer 2.6.0-1 with my Powerware 5115 connected via USB port but have no luck. Here is my config files: *nut.conf:* MODE = netserver *ups.conf:* [PW5115] driver = bcmxcp_usb port = notUsed desc = "PowerWare 5115" *upsd.conf:* LISTEN 192.168.1.12 3493 *upsd.users:* [monuser] password =...

Hello, ppl! I try configure NUT for communicate with my Powerware 5115 UPS. As root I run '/lib/nut/bcmxcp_usb -DDDD -u root -a ups', but driver can't connect to my UPS. Some output: Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.4) debug level is '4' usb_set_debug: Setting debugging level to 3 (on) usb_os_init: Found USB VFS at /dev/bus/usb usb...

Hi, just wanted to provide a upsc dump for an Eaton/Powerware 5115 rack mount unit. This was on a CentOS 7.3 machine with following packages installed: nut-client-2.7.2-3.el7.x86_64 nut-2.7.2-3.el7.x86_64 nut-cgi-2.7.2-3.el7.x86_64 $ upsc eaton5115 ambient.temperature: 43 ambient.temperature.high: 75 battery.charge: 100 battery.runtime: 24171 battery.voltage: 40...

Hi, I'm trying to get a Powerware 5115 to communicate with the NUT via USB under Debian Linux and need help. Here is the output that I see. co-nh5:/tmp/mnt/projects/pwusb/nut-2.4.1# /usr/local/ups/bin/upsdrvctl -u root start Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1) USB communic...

Hi Arnaud, Any luck with the latest subversion trunk? From: Greg Sent: Wednesday, May 13, 2009 10:34 PM To: Greg ; Arnaud Quette Cc: Kjell Claesson ; nut-upsuser at lists.alioth.debian.org Subject: Re: [Nut-upsuser] Nut and PowerWare 5115 Hi Arnaud, Some more testing on Ubuntu 9.04. Here is the output of bcmxcp_usb and lsusb ============================================ root at Ubuntu9:/lib/nut# ./bcmxcp_usb -a PowerWare -u root Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1) USB communication subdriver 0.17 usb_set_debug:...

...2103 => 2103, Joe User [cookmaninsurance-voicemail] 3100 => 3100,Joe User [uswf-voicemail] 5101 => 5101, Joe User 5102 => 5102, Joe User 5103 => 5103, Joe User 5104 => 5104, Joe User 5105 => 5105, Joe User 5106 => 5106, Joe User 5107 => 5107, Joe User 5115 => 5115, Joe User -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050322/f1e59ad7/attachment.htm

...e available in my R session, but don't want them to be *normally* listed by ls(), or more importantly, saved if I save my session variables/functions. How can I do this? -- Michael Friendly Email: friendly AT yorku DOT ca Professor, Psychology Dept. York University Voice: 416 736-5115 x66249 Fax: 416 736-5814 4700 Keele Street http://www.math.yorku.ca/SCS/friendly.html Toronto, ONT M3J 1P3 CANADA

...o be installed under *R* 2.14.0 or later. but what should this contain? Can it simply be an empty NAMESPACE file? I assume that data does not have to be exported. -Michael -- Michael Friendly Email: friendly AT yorku DOT ca Professor, Psychology Dept. York University Voice: 416 736-5115 x66249 Fax: 416 736-5814 4700 Keele Street Web: http://www.datavis.ca Toronto, ONT M3J 1P3 CANADA [[alternative HTML version deleted]]

...39;s not to hard in this case, but my application is to a much larger table where this gets unweildly. -- Michael Friendly friendly at yorku.ca York University http://www.math.yorku.ca/SCS/friendly.html Psychology Department 4700 Keele Street Tel: (416) 736-5115 x66249 Toronto, Ontario, M3J 1P3 Fax: (416) 736-5814

...} > cars.lo <- loess(dist ~ speed, cars) > > (values <- loess.aic(cars.lo)) $span [1] 0.75 $aicc [1] 6.93678 $aicc1 [1] 167.7267 $gcv [1] 5.275487 > -- Michael Friendly Email: friendly AT yorku DOT ca Professor, Psychology Dept. York University Voice: 416 736-5115 x66249 Fax: 416 736-5814 4700 Keele Street http://www.math.yorku.ca/SCS/friendly.html Toronto, ONT M3J 1P3 CANADA