search for: 3sec

Did anybody tried MozIAX extension? It is Mozilla IAX2 soft-phone. http://moziax.mozdev.org/ I tried it yesterday on eee pc, connected to asterisk on local LAN and the performance is terrible! The delay is about 2sec or 3sec. and very bad echo. I think it is the implementation of their IAX2 in their add on, as I have tried external mic. and the same delay problem. As a comparison I've tried DIAX over dial-up connection and the voice quality was acceptable with very little delay. -- #Joseph GPG KeyID: ED0E1FB7

...as <pstn-4444> NOTICE[6769]: chan_sip.c:14316 handle_request_invite: Failed to authenticate user THELMA <sip:7804789998 at 10.10.0.103>;tag=50e17675d59121c4o1 at this point call fails, it is not being passed through to asterisk. I'm using Linksys 3102, PSTN answer delay is set to 3sec. to allow for caller ID to pass through. When I decrease timing to 1sec. or eliminate it 0sec the call goes through but there is no caller ID being forwarded. It was working OK for a while. So I'm not sure if Shaw Cable have upgraded something on their digital phone or there is a problem wit...

Aymeric Moizard a ?crit : > > I'm working on the echo canceller with the SVN, with Windows Mobile 5 > PocketPC. > > Obviously, I can't make it run correctly. What happens/doesn't happen? > My question: If I use the SPEEX_PREPROCESS_SET_ECHO_STATE, I have > changes in the sound: noise seems to be removed. Noise should be removed even without

Hello, I was trying to add metadata to my OGG stream (ices 2,0-kh59, icecast 2.0-kh51). It works... but the players are doing a small sound cut at metadata reception : - VLC (maybe 1/3sec cut) - JORBIS (java. maybe 1/10sec, because I can have set higher priority to sound processing and not to comment handling) (player plateform: Mac OS X 1.3.6) With VLC... I can say comments are unusable, it's too bad... Maybe if the comment change occurs between songs it not so noticeable, b...

Heh guys, I just received a T400 card, I've been using a T100 for a little while, and it works fine when using a raw channelized T1. I'm relocating my asterisk machine, and PRI's will only be available, haven't found any good config info for PRI's, can someone point me to PRI config info, or let me know what changes I need to make in order to bring them up, I imagine,

On Sun, 2004-12-12 at 21:57, Iceuse - Kris wrote: > Hello, > > I was trying to add metadata to my OGG stream (ices 2,0-kh59, icecast > 2.0-kh51). > It works... but the players are doing a small sound cut at metadata > reception : > - VLC (maybe 1/3sec cut) > - JORBIS (java. maybe 1/10sec, because I can have set higher priority to > sound processing and not to comment handling) > (player plateform: Mac OS X 1.3.6) > > With VLC... I can say comments are unusable, it's too bad... Maybe if > the comment change occurs between...

...wing that would work in UK and if so, how to: LOOP 1. call out from landline onto a short list of mobile phones 2. detect the signal 2.1 if ringing or busy or or call answered -> mark the number in db as reachable (don't wait for a call to be answered if possible) 2.2. all other answers or 3sec timeout -> mark the number in db as unreachable 3. hung up END LOOP Many thanks, Kumin Ashram _________________________________________________________________ Find a cheaper internet access deal - choose one to suit you. http://www.msn.co.uk/internetaccess

...ke my record stop using this syntax in a PHP agi script :fwrite(STDOUT, "RECORD FILE /var/lib/asterisk/ENR/jeanpaul wav '#' 15000 BEEP s=3000\n");The php syntax isn't a problem because I really start recording, I have a beep, the record can't long more than 15sec and after 3sec of silence my record stop. Btu if I press # it doesn't stop the record.It i probably a problem with my '#' syntax.Can you explain me how to fix that problem. (I have the same problem with SAY NUMBer and the escape DTMF...Thanks again for your useful helpKheraud _________________________...

...ng -n {remote host} > { 6 second delay } > 64 bytes from 216.168.105.33: icmp_seq=0 ttl=255 time=6sec > 64 bytes from 216.168.105.33: icmp_seq=1 ttl=255 time=5sec > 64 bytes from 216.168.105.33: icmp_seq=2 ttl=255 time=4sec > 64 bytes from 216.168.105.33: icmp_seq=3 ttl=255 time=3sec > 64 bytes from 216.168.105.33: icmp_seq=4 ttl=255 time=2sec > 64 bytes from 216.168.105.33: icmp_seq=5 ttl=255 time=1sec > 64 bytes from 216.168.105.33: icmp_seq=6 ttl=255 time=242usec > 64 bytes from 216.168.105.33: icmp_seq=7 ttl=255 time=250usec > ... Yes, and I know just h...

...igured in sip.conf: [peer1] type=peer host=10.10.10.1 [peer2] type=peer host=10.10.10.2 Now dialout is no problem. Extensions.conf says: exten => _0Z.,1,Dial(SIP/49${EXTEN:1}@peer1,30) But how can I setup a failure-route if the SIP-Proxy "peer1" ist not answering (in 3sec) or send "50x" error? Next idea is to use both peers in round-robin, if they are working. Could someone help? Regards Thomas

I am the maintainer of GDM, and I am noticing that GDM has a problem when running on a ZFS filesystem, as with Indiana. When GDM (the GNOME Display Manager) starts the login GUI, it runs the following commands on Solaris: /usr/bin/setfacl -m user:gdm:rwx,mask:rwx /dev/audio /usr/bin/setfacl -m user:gdm:rwx,mask:rwx /dev/audioctl It does this because the login GUI programs are run as the

...disconnect - icecast didn't notice it - the source cannot reconnect until - the source cannot reconnect (it tries every 8 seconds) - after two hours, the source is able to reconnect Here is the interesting parts of the log files: Thanks for your advices and help. Chris (icecast machine has +3sec in its time, that's normal, it's an old machine) *************************************************************************** ************************* ICECAST ERROR LOG ******************************* *************************************************************************** [2003-11-19...

Hello, i am using samba4rc2. I have problems with the bind9 dlz module, i get very long response times from interal queries. root at s-srv01:~# dig s-srv04.test.local @192.168.0.4 ; <<>> DiG 9.8.0-P4 <<>> s-srv04.test.local @192.168.0.4 ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 64478 ;; flags: qr aa rd ra;